Commit Graph
1087 Commits
Author SHA1 Message Date
Sameh Khamis 2cc226c1f9 Name the aircraft icons' 76 device-pixel image switch, and give it in CSS pixels
The draw contract measures an icon's imageLod switch in CSS pixels; the
aircraft layers' GPU icons switch to their near image past 76 device
(drawing-buffer) pixels. iconAtlas now names that switch, which the icon
shader reads, and nearImageSwitchPx(pixelRatio) gives it in CSS pixels for
a layer moving onto the draw port: 76 over the scene's pixel ratio, the one
the quality port's frame signals report. On the default renderer that is
its pixelRatio setting, or 1 while that is browser-recommended;
devicePixelRatio does not enter it, so the default is 1.
2026-11-07 02:36:39 -08:00
Sameh Khamis 0349941b71 Read a moving icon's position and course through one shared evaluator
render/motion/iconMotion evaluates a draw item's motion segment and course
glide at a time on the set's motion clock, without a renderer: where the
item is drawn, the course it is drawn with, and when its motion ends. The app
can now read a moving icon back (to follow it, label it, judge a pick or
its horizon) the way the renderer draws it.

The stub renderer evaluates its segments with it, in place of its own copy,
and so now steps a lerp with no span 1 ms after t0, as the Cesium renderer
does. The Cesium GPU icon sets read the course shown before a write, a
blend's target and when rows stop moving through it, from copies of what
they wrote, and write each glide with the offset it computes, so an exact
half turn goes the way the app reads it.

norm360/norm180 and Position-to-ECEF move to geo for both to share.
Conformance gains a check that icons are drawn where the evaluator puts
them.
2026-11-07 02:36:39 -08:00
NeoXrated23 891eb56091 feat(cctv): add optional Giroc camera and support larger HLS segments 2026-11-07 11:46:48 +02:00
Sameh Khamis 6386034add Run the submarine cables layer's sweep and render requests through the frame port
The cables lifecycle and ingestion parts had left the Cesium allow-list
but still hooked the scene's preRender event and asked the scene for
renders directly. They now use the frame port.
2026-11-07 01:04:46 -08:00
Sameh Khamis 6fc3c78e70 Read the awareness layer's camera and frame through ports
The awareness lifecycle and focus parts had left the Cesium allow-list
but still hooked the scene's preRender event and read the Cesium
camera's position and orientation. They now use the frame port and the
camera port's pose, with the same quantized motion signature.
2026-11-07 01:04:46 -08:00
Sameh Khamis 045267c841 Keep the radio layer's Cesium entities and picks in its rendering part
The radio interaction, selection and navigation parts had left the
Cesium allow-list but still read pick objects, toggled entity
visibility, removed the selection entity, re-ran clustering and read the
Cesium camera. Navigation now reads the camera port's pose; the rest
moves into the rendering part.
2026-11-07 01:04:46 -08:00
Sameh Khamis f6c5e6ba10 Drive the launches layer's frame, camera and entities through ports and its rendering part
The replay chase camera and the mission frame pass listen on the frame
port, the hover on the camera port's move events. Showing the missions,
clearing their entities and reading mission picks move into the launches
rendering part, which stays on the Cesium allow-list, so the layer's
other files no longer drive Cesium. A replay with no frame loop to move
its camera on does not start.
2026-11-07 01:04:46 -08:00
Sameh Khamis f6422d2247 Draw the vessels layer's ships through the renderer's ports
The ships are one icon set from the draw port, held on course with hold
motion segments and drawn over depth as before; the layer keeps what it last
drew in an icon book and reads focus and pick ownership back from there,
matching clicks on the draw hit's set and id. Its frame hook, camera pose,
horizon test and screen projection come from the frame, camera and query
ports, with the horizon lift in geo/horizon judging the same point the GPU
cull does. The icons' draw set is disposed when the layer is destroyed.

rendering.js no longer imports Cesium or touches the scene's primitives,
picks, render events or camera, and leaves the Cesium allow-list. It still
reads the canvas size for the label budget. Callers of the vessels entry
load the Cesium adapter's unbound fallbacks.
2026-11-07 00:38:20 -08:00
Sameh Khamis bb85e0fa74 Draw moving icon sets on the GPU through the Cesium draw port
An icon set whose items move along motion segments, glide their course,
recede toward the limb, pick through a larger proxy or switch images by
drawn size, or that takes columns, now draws as one instanced
IconSetPrimitive in place of its billboards. The set switches the first time
an item needs it (or columns arrive) and stays switched; a course blend
alone switches it only when everything it holds can go. The Cesium ports
advertise columns, motionSegments and courseGlide.

GPU sets refuse loudly what billboards draw and they do not: clamped
heights, fadeByDistance, displayRange, offsets, anchors other than the
centre, axis and screen rotations, opaque and additive blends, images other
than URLs and SVG, and more images than the shared atlas has room for. A
refused write changes nothing.

The shared icon columns gain an image switch size, a pick proxy and a
per-row depth-test distance (defaulting to always over depth, as before),
arcs gain a climb rate, and the epoch rebases in both directions. Rows keep
asking for frames while they move, turn or blend; a write that moves a row
as it already moves (a restyle, a focus change) leaves its segment alone.
Billboard icons now fade with focus as GPU ones do.

Conformance gains columns and motion checks for the Cesium adapter.
2026-11-07 00:38:20 -08:00
Sameh Khamis a8cf63999b Read the street traffic viewport through the camera and query ports
The traffic layer's camera altitude, view bounds and fetch centre come from
the renderer's camera port (its pose and view rectangle), and the reticle
footprint samples the ground with the query port's ellipsoid picks and
rays instead of the camera's own. The footprint's nadir is the pose
position in geodetic radians, as the camera's own cartographic position
was. A pixel the renderer has no ray for (a canvas of no size) samples no
direction, as the unset scratch ray did. The lifecycle part loads the
default renderer's camera factory, so a viewer of a caller's own gets
both ports.

Footprint and viewport leave the allow-list.
2026-11-07 00:09:10 -08:00
Sameh Khamis 10db177251 Compute street traffic roads, colours and state without Cesium
Road waypoints are plain ECEF points from the geo helpers (the same
formulas as before, so every waypoint and segment length is unchanged), and
the palette is renderer colours. The style part, still on the point
primitives, turns those into the points' colours once per colour and owns
the dot painting the model used to do itself; the rendering part converts
them for the heat lines. The animation keeps its own lerp scratch, and the
ingestion's centre height asks with plain degrees.

Ingestion, model, policy, state and timing leave the allow-list.
2026-11-07 00:09:10 -08:00
Sameh Khamis 2443028d0f Take the camera viewshed colours and volume builder off Cesium
The viewshed palette is renderer colours from a new hslColor in
render/color, which computes as the renderer's own fromHsl does (the CSS
HSL reading now goes through it). The volume primitive builder moves,
unchanged, into the camera layer's rendering part, which converts each
record's palette to Cesium colours once and draws the lines and volumes
with them as before. Tests check the palette against the renderer's
colours exactly.

cctvViewshed leaves the allow-list.
2026-11-06 23:47:17 -08:00
Sameh Khamis 7d760d32fc Take the camera layer's policy, state, model and ground off Cesium
The layer's colours are renderer colours; the parts that still draw with
Cesium (icons, coverage lines, the monitor plane) turn them into Cesium
colours with the adapter's own conversion. The screen and matrix scratches
are plain objects, which is all the projections that fill them write.

The model part converts angles with geo/vector, reads where the eye is
from the camera port's pose, and builds the monitor plane's orientation
with geo/quaternion from the same axes; the projection part hands the
entity a Cesium quaternion of it. The photoreal tileset readiness check,
which looks through the scene's primitives, moves to the geometry part.
The ground pass moves a camera icon by writing geo/ellipsoid's position
into the record's own position object. The test plane's plain material
comes from the projection part, and the selection part only lost an
unused import.

All give the same numbers as the Cesium calls they replace. Policy,
state, selection, testing, model and ground leave the allow-list.
2026-11-06 23:47:08 -08:00
Sameh Khamis 2592289612 Draw the ALPR layer's markers through the renderer's ports
The ALPR badges were Cesium entities whose billboards the layer changed in
place: the canvas overlay swapped a badge to a faint pick target at its
anchor, selection swapped the image, and unresolved floors clamped to the
ground. They are now one icon set from the draw port, updated in place
through upsert, so selection and the overlay swap change the same
billboard without a rebuild or a blink. Badges keep their scale by
distance, ground clamping and depth-test settings.

Marker state lives in the app (markerState.js): a plain carrier per camera,
registered as the camera's context entity, and a marker set that batches
changes and sends only the icons that draw differently. Clicks on native
badges come from the dispatcher's draw hit. Projection, the on-screen
count, height samples (excluding the layer's own set), the screen-centre
ellipsoid pick and the camera reach the renderer through the query,
camera and frame ports. A resync of the overlay now hands back only the
cameras that leave it, so kept ones are not written twice.

index.js, overlay.js and presentation.js leave the Cesium allow-list; the
layer's entry is Cesium-free, and a caller's own viewer loads the
unbound factories.

Differences the contract does not let us avoid:
- Double-clicking a badge no longer starts the viewer's entity follow,
  since draw items are not entities.
- The terrain fallback for anchors is no longer skipped while the globe
  is hidden: the globe port has no visibility getter.
- Without depth support the query port answers no heights, terrain
  included, so anchors wait for a cached floor there.
- On a viewer with no renderer bound, the surface counts as settled
  when anchors are refined.
2026-11-06 23:28:43 -08:00
Sameh Khamis faded8a418 Draw the installations layer's named markers through the renderer's ports
The named-site dots are a draw-port point set with horizon culling instead
of a raw point collection; their on-screen count tests the ellipsoid
horizon and projects through the query port, and they follow the camera
port's changed and moveEnd events and the frame port's preRender. Points
that only change look (a selection) are restyled in place. Clicks on a dot
read the draw hit; the item id is not the bare record id, so sibling
layers' pick-owner checks still treat a dot click as nobody's.

Code that only asks whether a click hit anything (the CCTV layer) now sees
a dot click as a hit, as it already did for the site markers: a draw item's
pick always resolves to its id.

The named markers leave the Cesium allow-list. The site markers in
rendering.js stay entities.
2026-11-06 23:28:43 -08:00
Sameh Khamis e327760074 Build the selected vessel's trail without Cesium
Trail vertices are geo/ellipsoid positions and the minimum move is measured
with geo/vector, both giving what the Cesium calls gave. Re-anchoring rows
when the geoid loads asks the rendering part for the anchor, now one
function prepareRecordVisual shares, so icon positions stay Cesium values.
The shared trail renderer takes plain ECEF positions as well, turning them
into Cartesian3s for its polyline; the Cartesian3s other layers hand it
pass through untouched. tracking leaves the Cesium allow-list.
2026-11-06 23:02:09 -08:00
Sameh Khamis a2503476de Compute launch paths, cameras and colours without Cesium
The launches layer's path building, replay camera maths, policy constants,
state, marker colours and mission panel no longer import Cesium. Paths and
camera poses are plain ECEF points computed by the geo helpers with the
default renderer's own formulas in the same order, so trajectories, orbits
and camera framing land where they did. Geodesic interpolation moves from
the stub renderer into geo/geodesic (geodesicLine, solved once per
geodesic), and geo/sphere gains the renderer's sphere union.

Marker colours are renderer colours, with the panel's CSS from the same
palette. The rendering part, still Cesium for its entities, converts the
plain points where the entities take them, culls with the shared horizon
test, loads the unbound camera factory, and hands the panel the live
payload position directly instead of through the entity.

Camera, model, panel, paths, policy, policyHelpers and state leave the
allow-list.
2026-11-06 22:57:55 -08:00
Sameh Khamis 4ed51930c2 Give a viewer of its own a frame port, and use it for the active fires layer
findFrame and frameOf find the bound renderer's frame port or, for a
caller's viewer with no renderer bound, one the Cesium adapter's factory
builds over it, as findQuery and findDraw do. Unlike the renderer's own,
it leaves the viewer's loop as its owner set it up: it listens to the
scene's phases, asks for frames, holds by asking again after each one
drawn, and maps suspend, the target rate and scene time onto the viewer.
Its preUpdate says whether the tick draws by the same test the renderer's
frame port makes, now shared by both.

The active fires layer's cards and LOD watcher take their query and frame
ports from findQuery and findFrame, in place of the layer's own copy of
projection, occlusion and preRender over the viewer's scene.
2026-11-06 22:25:07 -08:00
Sameh Khamis 784561a6ae Give a viewer of its own a query port, as it has draw and camera ports
The Cesium query port moves out of createCesiumPorts into its own module,
unchanged, so it can also be built over a caller's viewer with no
renderer bound. findQuery and queryOf find the bound renderer's query port
or, for such a viewer, one the Cesium adapter's factory builds, as findDraw
and findCamera do. It picks the sets drawn through findDraw on that viewer
and its height samples see through them, so a layer can exclude its own
sets; it projects, casts rays and picks the ellipsoid as the renderer's
does. A renderer bound later answers new callers.

The camera factory and the caller's unbound export load it, and the
factory walk checks that every public entry reaching a findQuery or queryOf
caller loads it, or is a Cesium-free entry whose caller does.
2026-11-06 22:25:07 -08:00
Sameh Khamis e74c7c1f44 Draw submarine cables through the renderer's draw and camera ports
Cable lines, landing pins, polygon fills, reference stems and reference
points are now five draw sets per layer (submarine-cables:N:lines and so
on) instead of GeoJSON data sources and entities. Clicks resolve through
the draw hit; flights and the sweep's eye go through the camera port.
The layer keeps the styling the GeoJSON loader gave it: cable colours,
widths and alphas, simplestyle stroke, fill and marker properties, fills
that keep the source's alpha, raised polygons at their heights, the
default pin image, and features without a reference drawn but neither
picked nor culled. Lines are densified along rhumb lines at the
renderer's own granularity, so the draped geodesic arcs land on the same
vertices the rhumb-line polylines did.

Supporting pieces:
- geo/rhumb, geo/horizon and geo/geodesic port the default renderer's
  rhumb line, ellipsoidal occluder and Vincenty inverse; the stub
  renderer now uses the shared horizon test and Vincenty inverse
  instead of its own copies. render/color gains cssColor, which reads
  CSS colours as the renderer does (hex, rgb, hsl; not named colours).
- The Cesium draw port changes a line in place when only whether it
  shows changes (draped, on its ground primitive, waiting for it to be
  ready rather than restarting its build) or where an undraped line
  runs; anything else still rebuilds. Icon sets honour their blend.

Ingestion, interaction, overlay, policy, rendering, state and surface no
longer import Cesium and leave the allow-list. Pins are culled at the
horizon each frame by the draw port instead of on the sweep, and
marker-symbol glyphs are not drawn inside pins.
2026-11-06 22:10:53 -08:00
daika 021e887f94 feat(cctv): add Iceland (Vegagerðin / IRCA) as a keyless CCTV source pack
One JSON list from gagnaveita.vegagerdin.is (about 500 camera views at roughly
170 road stations). Frames are JPEG stills in a single directory on
www.vegagerdin.is; only links inside that directory are registered, and the
media proxy pins the same directory.

The list decides ids, coordinates and which frame path is proxied, so it is
fetched over https with redirects refused and the body read capped at 2 MiB;
every rejection path releases the response body. Camera ids come from the frame
file name, which is unique per view in the live feed, and repeated frames
collapse before the cap.

The feed's view description (`Skyring`) is the label. An explicit Icelandic
facing ("til vesturs", "í suður", "séð austur") sets a high-confidence heading
(264 of 499 views); a view that states none, or two different ones, keeps the
id-hash low-confidence pose. A bare road direction ("Miklabraut austur") is not
read as a facing.

IRCA publishes road camera images under CC BY 4.0 and asks that the licensor is
acknowledged without implying endorsement; the attribution is in the Data
attribution popover and DATA_SOURCES.md, and every camera carries the licence
string. Default cap is 250 with anchors at Reykjavík and four regional centres so
a cap keeps every region. CCTV_ICELAND_ENABLED=0 turns the pack off.

Verified against the live feed through fetchCctvImageFromUpstream: 499 of 499
frames returned a JPEG, all distinct, all under 20 minutes old.
2026-11-07 12:57:08 +07:00
Sameh Khamis df1143485a Draw the context rim through the renderer's draw port
The Contacts layer's 250 km rim is now an outline-only ellipse in a draw
set of its own, taken from drawOf(viewer) when it is first drawn: the
same colour, height and radius, moved only after the subject travels 250
m, cleared with the subject and disposed with the layer. A rim drawn on
another viewer is redrawn on the current one. The Cesium draw port draws
the outlines of ellipses it does not clamp as the entities did, with an
outline geometry.

The layer's positions are plain ECEF from src/geo rather than Cesium
objects, the compass reads the camera through its port's pose, and its
flights go through cameraOf from the renderer bridge. Its four files
leave the Cesium allow-list; a caller handing the layer a viewer of its
own loads ./render/cesium/unbound first, as for earthquakes.
2026-11-06 20:39:36 -08:00
Sameh Khamis 6e23d2aac9 Move the active fires layer's cells, camera, cards and LOD onto renderer ports
Heat cells are clamped rectangle fills in one draw set per layer
(firms:N:cells) instead of entities. The LOD watcher follows the camera
port's pose, view rectangle and moveEnd and the frame port's preRender;
cards project and horizon-test through the query port. Colours, the view
change thresholds and the padded bounds are unchanged. On a viewer with
no renderer bound, the layer answers projection, occlusion and preRender
from the viewer's scene, as it did before.

Policy, model, state, viewport, cards and lifecycle no longer import
Cesium and leave the allow-list. Rendering keeps Cesium for the detection
icons, which stay on the shared icon-set primitive, and loads the unbound
camera and draw factories. Heat cells are no longer entities, so
double-clicking one no longer makes the camera follow its centre.
2026-11-06 20:30:33 -08:00
Sameh Khamis 8c6fa6258b Move the bikeshare layer onto the renderer's draw and camera ports
Station dots and the selected-station highlight are now two point draw
sets, picked through the draw hit, and the layer follows the camera
through the camera port at its own threshold instead of the shared
percentageChanged ledger. Altitude and view centre come from the camera
pose and view rectangle. All five bikeshare files leave the Cesium
allow-list.

The Cesium draw port now keeps a rebuilt host in its place in the scene
instead of re-adding it on top, tags hosts with their set id so sprite
order can raise a draw set (registerSpriteSet), and restyles unclamped
points in place when they have not moved, so a status poll or selection
no longer rebuilds every station. Other draw-port layers (cyclone
markers, earthquake discs) now also keep their first-build slot rather
than jumping above the sprite layers on each rebuild.
2026-11-06 20:26:35 -08:00
Sameh Khamis bd5a688144 Draw tropical cyclones through the renderer's draw port
The cyclone layer no longer imports Cesium. Its advisories are three draw
sets per rendering (points, lines, cones) taken from drawOf(viewer): the
centers and forecast points are clamped dots culled past the horizon, the
tracks and cone outlines are draped lines, and the cones are clamped
polygons that keep their holes. Flights go through cameraOf, and the focus
sphere comes from a port of BoundingSphere.fromPoints in src/geo/sphere.js.

Clicks read the new ClickEvent.drawHit: the dispatcher's pick as the
contract's Hit when it is a draw-set item. The Cesium port's query uses the
same conversion, now in render/cesium/drawHit.js. pickStorm takes that hit
and accepts only current items of the layer's own sets.

Every advisory commit redraws the points, so an empty advisory clears them;
an unchanged selection draws nothing. Far-side tracks and cones are left
to the globe's depth instead of a per-frame occluder. Both cyclone files
leave the Cesium allow-list.
2026-11-06 19:15:09 -08:00
Sameh Khamis bb3106991e Draw earthquakes through the renderer's draw port
The earthquake discs are now one draw set of ground-clamped filled
ellipses per layer, with the same colours, alphas and radii; they had no
visible outline before either (Cesium turns outlines off on clamped
entity ellipses). The layer and its model no longer import Cesium and
leave the allow-list.

depthColor now returns a renderer colour [r, g, b, a] rather than a
Cesium colour, and depthAccent its CSS. A caller handing the layer a
Cesium viewer of their own, with no renderer bound, first loads the new
./render/cesium/unbound export, which provides every unbound factory; the
camera factory now loads the draw factory too, so entries that already
load it draw as well. A fake draw port for layer tests comes with it.
2026-11-06 19:15:08 -08:00
Sameh Khamis b3dfcddcde Drape the open-data map overlays through the renderer's globe port
The sea-mark and ski-piste overlays add an XYZ imagery layer through the
globe port instead of building Cesium layers into a host collection. The
port drapes it on the globe on globe stacks and on the Google 3D tiles,
which the map stack now marks as its base tilesets. The row's hidden
reason reads the map stack's new getDrapeSurface, or the viewer's globe
when there is no map stack, and an overlay enabled before its viewer has
a globe port adds its layer once there is one. The overlays no longer
reach Cesium, so they leave the allow-list.
2026-11-06 18:29:40 -08:00
Sameh Khamis 69e8cef846 Add data credits through the renderer's credits port
Data attribution no longer builds Cesium credits itself: each credit is
added through the renderer's credits port, in the attribution list as
before. The port's credit carries one link, so a credit whose markup
holds several links becomes one credit per link, shown together in
order, its wording kept. dataCredits.js leaves the Cesium allow-list.
2026-11-06 17:59:00 -08:00
Sameh Khamis 09a84ea8a5 Give the Cesium camera port its user camera controls
camera.controls now maps the contract's CameraControls onto the scene's
ScreenSpaceCameraController: the enable flags, zoom distances, zoom
factor, coast as Cesium inertia (decay seconds, 0 for no coast), the
collision switch, the tilt limit as the upper end of pitchRange, and the
zoom bindings by name. suspend and enabled use the scene's shared input
holds, so they count with the input port's and the dispatcher's.

A follow's zoom hold now composes with the settings: minDistance and
coast.zoom read and set what the follow gives back, a higher floor takes
effect at once, and a follow never lengthens a shorter zoom coast.

The ctrl+wheel binding check reuses the controls' binding helpers, and
the controls checks run in the Cesium conformance set, the settings one
in Node as well.
2026-11-06 17:26:03 -08:00
Sameh Khamis 9f07da38a5 Own the credits modules where the camera factory loads them
The Cesium camera module now loads the credits factory, so the flight,
military and satellite packages own the credits modules too, and the
infrastructure build lists them.
2026-11-06 16:44:24 -08:00
Sameh Khamis 6a7905fc49 Drive the visual styles, bloom and sharpen through the effects port
VisualEffects defines each preset on the renderer and keeps its own
records of intensities and parameters, written through to the port, so
crossfades, the anime sky fade, bloom and sharpen behave as before. The
renderer animates the animated styles. Sensor picks read the style
records instead of the renderer's stages. The application renderer now
has the effects port and its capabilities.
2026-11-06 16:32:49 -08:00
Sameh Khamis 765a0db094 Add layer and map credits through the renderer's credits port
The street-level provider credits, the map source credit, the shared
inline OpenStreetMap and OpenMapTiles credits and the ALPR provider credit
go through the renderer's credits port instead of Cesium's credit display.
Their markup has one link each and is read as the port's plain data; the
ALPR credit is built as plain data, which the port escapes. src/maps/credits.js
and src/layers/streetLevel/credits.js no longer reach Cesium and leave the
allow-list.

findCredits finds the port as findCamera finds the camera: a Cesium viewer
of a caller's own, with no renderer bound, gets a credits port over its
own credit display, so the public entries keep their attribution. A port
built that way is released, not disposed, when a renderer binds later, and
a credit let go after its viewer is destroyed leaves the display alone.

The per-layer data credits and the transit and event credits stay on
Cesium's display: their markup carries several links each, which the
contract's credit cannot hold.
2026-11-06 16:32:23 -08:00
Sameh Khamis e3a850bc9c Follow aircraft and satellites through the camera port
Flights and military follow their tracked aircraft with an
entityFollowTarget: framed in ENU from viewFrom, never closer than
150 m, presentation read from the drawn entity's record. Satellites
follow in Cesium's autodetect frame. The layers' own framing
(applyTrackedCameraFrame) goes; the port's follow has the same
close-range rules, and trackedCamera.js no longer imports Cesium.

The port's helper entity draws nothing: its point's outline is
transparent too, and click and voice picks of it count as picks of
the target's drawn entity. The fake camera binder follows when the
fake has Cesium's entity tracking.
2026-11-06 16:10:48 -08:00
Sameh Khamis 99f9a701d9 Read the followed target, not trackedEntity, in the follow readers
The tracked card, screen annotations, north-up, share links and Cockpit
ask data/followed.js what the camera follows, so they work the same when
a layer follows through the camera port. followed.js gains
entityFollowTarget (a FollowTarget whose presentation reads the drawn
entity's record), resumeFollowing and followedPosition.
2026-11-06 15:31:36 -08:00
Sameh Khamis 7eec2f828c Read what the camera follows through one module
src/data/followed.js answers what the camera follows: the camera port's
target, or the entity a layer still tracks itself, seen through the same
fields. Ownership checks, render holds, guards, voice actions, the CCTV
pacing and the navigation release paths read it instead of Cesium's
trackedEntity, so they keep working when layers follow through the port.
The release paths stop following, cancel the flight and release the
camera through the port. The rotate refusal names the followed target by
its name or label title.
2026-11-06 12:27:23 -08:00
Denis Groshev f4376f2f4f Merge branch 'main' into denis/gev-news-layer 2026-11-06 21:02:10 +01:00
Sameh Khamis 6c215f93a9 Follow on the Cesium camera port
The Cesium camera port follows a target with Cesium's own entity
tracking, on a hidden helper entity per target, and gains followed,
followFramed, followOffset and followChanged. A target with a minimum
range gets GEV's close-range rules, moved here from trackedCamera.js:
an exact first framing, no zoom coasting, a zoom floor, and an eye that
never crosses through the target. followChanged now fires only when
what is followed changes, on the stub too. No layer follows through the
port yet.
2026-11-06 11:49:09 -08:00
Sameh Khamis 9c8bb206ef feat(traffic): Lines and Dots toggles; hosts choose which road modes they offer
createTrafficSource({ roadModes }) lets a host offer a subset of the TomTom,
OSM and Hybrid road modes (all three by default). Without OSM the layer never
draws simulated roads, and a single mode shows no road chip.

While flow is live the Street Traffic row offers Lines (every road with flow
as a steady green/amber/red line, from the heat-line renderer) and Dots (the
moving dots), saved in layer state and share links. Defaults: Lines off,
Dots on.
2026-11-06 11:37:57 -08:00
Sameh Khamis 21d23034ec Orbit, move, look and zoom through the camera port
The Cesium camera port gains move, look, rotateAround and zoom, and the
browser conformance run now checks them, the lookAt-frame commands, the
changed thresholds and moveEnd (timed by the clock, not a frame count).
Orbit, the Bhote Koshi focus and cinematic, the launch zoom anchor and
replay chase, the camera verbs' motion tick and roll levelling, and
voice zoom write through the port.
2026-11-06 10:21:04 -08:00
German Khokhlov 4c62435910 Drop the duplicate callout test and the card id cache 2026-11-06 22:01:39 +04:00
German Khokhlov ea76fc4bc0 Fold duplicate coverage tests into their neighbours 2026-11-06 22:01:39 +04:00
Sameh Khamis c722593791 Undo the reformatting of four camera-slice tests
The camera-port commits ran prettier over four test files that were
never prettier-formatted. Restore their earlier text and keep only the
camera-port edits.
2026-11-06 09:55:05 -08:00
Sameh Khamis bec83bcfce Fly the director, annotations, voice framing and local GeoJSON through the camera port
The scene director's shot flights, start pose and stops, the annotation
framings and fly-to, the voice overhead framing and the local GeoJSON
click flight now drive the renderer's camera port. The director's stops
look the camera up with findCamera: teardown can run after the viewer is
gone, and then there is no flight to stop. The local GeoJSON flight,
part of the public infrastructure export, works on a plain Cesium viewer
through the unbound camera, and looks it up before taking its input
hold. Voice zoom stays for the move slice.
2026-11-06 09:49:30 -08:00
Sameh Khamis 1d4e4ebe90 Fly the remaining flights through the camera port, on any viewer
The embed view, the celestial-ring focus, the ground-guard lift, the
Bhote Koshi approach and orbit, launch selection and replay flights, and
the cockpit's view and takeover now drive the renderer's camera port.
The contract gains a sineInOut easing, pinned by a conformance trace.

A viewer with no renderer bound, such as one a caller of a public
export brings, now gets a camera port too, as it already got an input
port: cameraOf builds one over the viewer's own Cesium camera and keeps
it for the viewer's life, until a renderer is bound. The Cesium adapter
provides the factory as it loads; code that reaches Cesium takes cameraOf
from the adapter so the factory comes with it, and findCamera answers
null where a missing camera is not an error (HUD, share link, world
focus, Recent Imagery's ZOOM IN). A test walks every package export and
fails one that can reach the bridge without loading the factory.

A destroyed viewer gets no camera and lets go of a built one, and the
application renderer stays bound until its viewer is destroyed.
2026-11-06 08:21:57 -08:00
German Khokhlov c9f40a837c Tighten callout fade comments and docs 2026-11-06 20:20:11 +04:00
German Khokhlov 5c4918affb Tighten coverage prompt comments and docs 2026-11-06 20:20:11 +04:00
German Khokhlov 3a78f40024 Merge main into german/transit-bikeshare-empty-state
Conflict in src/layers/transit/queries.js: keep the branch's shared note with the gate's enter altitude and main's distinct region count.
2026-11-06 20:00:58 +04:00
German Khokhlov 910e63a56a Merge main into german/vessel-callout-under-card
Resolve addPaintItem by keeping both the collision reset from main and the
queued-card frame stamp from this branch.
2026-11-06 20:00:45 +04:00
Said Turksever 3f152a71a1 Merge branch 'main' into fix/keyless-unicode-search 2026-11-06 12:09:03 +00:00
German Khokhlov e073e4dbe4 Merge branch 'main' into feat/datacenters-norway-refresh 2026-11-06 15:55:23 +04:00