Translation files: kept both sides' new keys. public/models/README.md:
main's procedural fleet text, with a section for NASA's ISS model, the
one model outside the fleet set; DATA_SOURCES.md notes that exception.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Most live vessel feeds send no length, and the resolver then fell through
every length rule to the range's last model drawn as built, so a cruise
ship or a container ship showed as the smallest model of its range.
types.json gives each passenger, cargo, tanker, fishing and service range
a typical_len (cargo 300 m, tanker 250 m, passenger 140 m, fishing 40 m,
...); a vessel with no usable length is chosen and drawn at it.
Flights, Military Flights and Local ADS-B draw each aircraft with the fleet
model its ICAO type, class or emitter category selects, scaled to the type's
length, built from the up-front loaded bytes. The eight third-party aircraft
models and their attribution are removed; every shipped model is now the
project's own.
121 GLBs under public/models/fleet (about 2 MB, MIT like the code) with
catalog.json and types.json. src/data/fleetModels.js picks a model by ICAO
type, aircraft class, emitter category, AIS ship type and size, GTFS route
type, transit mode or rail category, and sizes it life size; the set loads
once, up front. Trail anchors are measured from the meshes.
The ISS model is now NASA/JSC IGOAL's current-configuration station
(Nauka, Prichal, Bishop, roll-out arrays), reduced from 96 MB to 3 MB
with its joints kept as nodes. NASA's file is a mirror image of the
station and marks 15 materials as blended; both are corrected.
Its parts move by computation, never telemetry: arrays and radiators by
the Sun (feathered in the Earth's shadow), the Ku-band dishes toward the
TDRS nominal slots, and the robotic arms as an illustrative sway.
Selecting the ISS shows a collapsed command panel: zoom to the station,
Automatic (default, with a lit/shadow status line) and Manual controls
for the Sun's position, arrays, radiators, dishes and Canadarm2.
Also: docked objects are found by comparing both orbits at one instant,
the tracked card keeps clear of the model, the model file loads only
near its range, and both ISS panels follow a language change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Within 1,500 km of the camera the ISS (NORAD 25544) is drawn as NASA 3D
Resources' station model, at its real 109 m span with a 72 px floor, in
its usual +XVV attitude from a per-frame SGP4 sample (the follow camera's
sample while tracked). Farther out the dot stays; model and dots split
the distance range. Selecting the ISS opens a panel beside the existing
tracked card with NASA's official ISS live stream, embedded through
youtube-nocookie with a fixed video id (no page scraping).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes for #1506.
- Ottawa: use the documented camera list and the city's Traffic Camera
Images API. The pack is skipped with no request unless
OTTAWA_CAMERA_CERTIFICATE is set; the certificate is added only at
fetch time inside the pinned /opendata/ path, and each camera is
fetched at most once a minute through the shared frame cache.
- Québec 511 video is opt-in (CCTV_QUEBEC_VIDEO_ENABLED=1) and loads
only after the viewer presses Play; selection, auto-hop, scenes and
voice no longer contact Québec 511. Credit splits locations (MTQ,
CC BY 4.0) from video (Québec 511). Interrupted play() is no longer
reported as an unavailable source; the per-frame listener runs only
while a Québec camera is selected and the canvas rect is cached.
- Catalog cap: reserved Québec and World slots come only from capacity
above the 4,000 shared slots, so a lower CCTV_MAX_SOURCES thins every
pack instead of starving the existing ones. dev-fresh and
.env.example default to 7,516.
- Throttled frames (World, Ottawa): inside the refresh floor with no
cached frame the proxy serves the placeholder, never Street View; a
failed fetch backs off for a minute; the cache is bounded by bytes.
- MJPEG first-frame extraction runs only for sources registered as
MJPEG (Taiwan Highway Bureau), caps a frame at 2 MB, reads in linear
time, accepts a CRLF preamble and a boundary that already starts with
"--", and ends a part without Content-Length at the next delimiter.
THB hosts are registered in the redirect pin list.
- Tests: World loader policy, Québec loader and opt-in, proxy cooldown
without Street View, Ottawa signing, cap reservations at 7,516, 4,000
and 48, overlay Play gate, refresh, visibility and teardown. Guard
tests check the 4,000 shared slots again.
- Remove the unused standalone Québec preview module and public page.
- Docs: DATA_SOURCES, SECURITY, CURRENT-STATE, CCTV_INTEGRATION, README,
.env.example, changelog fragment renamed to its full scope.
- src/data/local_data/dams/dams.geojson held the same 704 features as
dams.geojsonl, feature for feature. Only the JSONL file is loaded
(src/sources/infrastructureData.js), so the GeoJSON copy is dropped
and the dataset README no longer mentions it.
- public/models/ship.glb is not loaded anywhere: no module, template,
stylesheet or script names it. Its row in public/models/README.md
goes with it.
Together these remove 960,345 bytes of tracked data.
black-translucent needs viewport-fit=cover and safe-area padding, which this change does not add. List the PNG favicon before the SVG so browsers that take the last usable icon keep the SVG, add mobile-web-app-capable, and give the manifest a stable id.
Manifest start_url, scope and icon src resolve against the manifest URL,
so root-relative values sent an app served under a path prefix to the
domain root. Make them relative, and add a build test under
base: '/example/' that asserts every emitted link and manifest URL stays
inside the base. index.html is unchanged: Vite already rewrites its
links under base.
Adding the app to a phone home screen produced a blank tile: index.html
linked only an SVG favicon, and Safari ignores SVG for apple-touch-icon,
substituting a screenshot of the page. There was no manifest at all, so
Android had nothing to install against either.
Generate the rasters from public/logo.svg with sharp, which the repo
already carries. The output is committed so a plain `vite build` needs no
image toolchain; re-run scripts/generate-icons.mjs after changing the
logo. The logo's viewBox is wider than it is tall, so each icon centres
the mark on a square #0a0a0f canvas rather than stretching it, inset to
78% normally and 54% for the maskable variant to survive Android's
circular crop.
The SVG favicon stays as the browser tab icon.