Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
A virtual aid (AIS message 21's VirtualAtoN flag) is a mark broadcast
where nothing physical stands, so drawing it as a buoy showed a mark
that is not there. The vessel source record now carries `virtual`
(false unless a source says true; any source may set it), AISStream
sets it from VirtualAtoN, and the vessel layer keeps such an aid's
disc: vesselModelSpec returns null for it and the layer gathers no
model item for it. Its card, selected card and readout add VIRTUAL
after its kind.
A buoy, beacon, RACON, light or IALA mark in the vessel feed was drawn
as a ship. A vessel record whose type names one, or whose MMSI is an
aid-to-navigation station's (99MIDxxxx), is now isAidToNavigation and
vesselModelSpec draws it as the fleet set's buoy of its mark (cardinal
N/E/S/W, port or starboard hand, safe water, isolated danger, special
mark; a red can when the type names no mark), at its built size and
flagged fixed so its model does not turn to a heading. Its icon is a
disc instead of a chevron.
AISStream now subscribes to AidsToNavigationReport by default, and the
server names each report's aid type code (0 to 31) as its kind instead
of reading it as a ship type.
Upstream's layers and changes are carried onto the ports, with no Cesium
outside src/render and no reach into the viewer:
- Shipwrecks draw as one icon set, clicked through the input dispatcher.
- News draws through draw sets, the camera port and the input dispatcher;
its beacons pulse each frame through the frame port.
- The scene occlusion probe moves into src/render/cesium and reaches
detection through a new application hook, createOcclusionProbe; its
private Cesium reads go through internals.js.
- Flight and military trails, the stale and SIGNAL LOST cue, coasting and
following the world clock run on the draw and frame ports. GPU icons
follow the scene clock while the world clock is followed, and fade when
stale. A report that holds is not planned again every tick.
- Vessels are keyed by their record id.
The stub boot now enables military, shipwrecks and news as well.
AIS Vessels are keyed by the id their live source gives, with the MMSI as an
attribute: an MMSI can be shared, spoofed or reused, so two vessels with one
MMSI are now two vessels. Looking a vessel up or selecting it by MMSI still
finds it.
A share link made while a vessel is selected opens that vessel. A UUID vessel
id travels as 16 bytes in a new thing field (13). A shared thing that is not
reporting now says so in a sentence per kind, with its id (ICAO, NORAD, MMSI
or vessel UUID) on a second line.
Brings in fire intensity and the draped heatmap (#1426), provider labels
(#1521), Rio transit (#1481), chat autocomplete and provider switching
(#1561, #1546) and Cockpit entry by the ridden layer alone (#1556).
What main added that reached Cesium or the viewer:
- The fires heatmap drapes as one image through the globe port's imagery
(heatImagery.js), above the port's other imagery, and drapes again when
the map stack's surface changes. The far bands no longer draw heat
rectangles; the layer's shape set stays as its initialized marker and
the visibility the context store reads.
- The hand-off between heatmap and markers fades the glow icons' own
alpha and the icon set's visibility. Markers keep their glows across
rebuilds; the set culls the horizon itself.
- A double-click on the followed track enters the Cockpit through the
input dispatcher. The renderer's own double-click follow would let go
of the track first and cannot be refused from a subscriber, so a press
on the followed track holds that behaviour off for the press.
- Cockpit entry and the ridden layer read the follow service; the camera
takes its eye offsets from a profile.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
The camera pose key moves to render/camera/poseSignature.js, Cesium-free, and
iconOrientation's cameraPoseSignature builds the same key through it. The
vessels frame hook reads the pose only when a pass runs or a moved camera
could still need its trailing pass, and the unused focus scratch point goes.
The draw port takes the frame port's requestRender, so a GPU icon set's own
frames (its images packed into the atlas) are asked for under the reason
icons:<set id> in the frame diagnostics, where the vessels layer's own
ais-vessels-icons reason used to be. Other draw requests are unchanged.
A host with no registerSpriteSet still draws the ships and warns once. The
vessels draw test now checks the sprite order finds the set's host, and that
a torn-down layer draws a new set registered in the old one's place. The new
motion, icon book and pose key tests join the format check.
The ships are one icon set from the draw port, held on course with hold
motion segments and drawn over depth as before; the layer keeps what it last
drew in an icon book and reads focus and pick ownership back from there,
matching clicks on the draw hit's set and id. Its frame hook, camera pose,
horizon test and screen projection come from the frame, camera and query
ports, with the horizon lift in geo/horizon judging the same point the GPU
cull does. The icons' draw set is disposed when the layer is destroyed.
rendering.js no longer imports Cesium or touches the scene's primitives,
picks, render events or camera, and leaves the Cesium allow-list. It still
reads the canvas size for the label budget. Callers of the vessels entry
load the Cesium adapter's unbound fallbacks.
A poll that returned the same stale snapshot dropped STALE from the
Contacts cohort until the next answer, because the in-flight loading flag
outranked stale and the source revision ignored the provider name. A
source that has answered now reads its status without the loading flag;
one that has never answered (AIS first connect) still reads as loading,
so it shows no STALE before any snapshot exists.
The three layers now add their billboards through addBillboard and write
the mirrored fields through setBillboard, so selection, cards, queries,
focus, view thinning and the FIRMS horizon cull read what was pushed from
the app instead of from Cesium. Vessels and FIRMS state their sprites' own
sizes (32 px ship artwork, the glow canvas at twice the core size), which
the mirror needs. A vessel helper, iconPosition, replaces the repeated
mirror-or-visual position lookups, and the vessel visibility pass writes
show only when it changes, as CCTV and FIRMS already did.
A billboard never given a position now has none in the mirror rather than
the origin.
The Cockpit Contact counts named fixed providers (OpenSky, adsb.lol,
AISStream) while the Layers panel and Contacts named the provider the last
snapshot reported, and the vessels layer kept that name out of getStats(),
so Contacts always said AISStream. Each cohort now carries the provider and
whether it answered as a fallback or from a stale snapshot, and both views
show it the way the Layers row does ("adsb.lol · FALLBACK").
Fixes HAL-721.
Vessels move only when a poll lands, yet enabling the layer held the
continuous render loop for its lifetime, so a parked vessels-only scene
rendered every frame. The layer now:
- requests a frame for every forced visibility pass (new data, selection);
- leaves one trailing frame when the camera moved inside the 800 ms
visibility cadence, so the view the camera stopped on is evaluated. It is
keyed to camera motion alone: the pass's own label publication requests a
frame, and scheduling on that looped at ~1.2 Hz;
- holds 'ais-vessels' only while focus emphasis is animating.
The 80 ms focus pass, which runs while anything is tracked, also skips hidden
sprites whose focus state is at rest (new spriteFocusAtRest) and whose alpha
is already 1: advancing them changes nothing, and with a 12k worldwide feed
they are most of the fleet.
Measured: a parked vessels-only scene (headless SwiftShader) went from
continuous mode and 28 frames in 5 s to idle and 0; horizon visibility had no
mismatches after the camera moved and settled. The focus pass over 12,000
vessels (11,353 hidden) went from ~4.0 ms to ~1.2 ms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>