A weather frame source's regional tiles reach the renderer through the
imagery layer's fetchTile, drawn and handed over as PNG bytes, a null tile
one shared transparent tile; the camera-owner watch listens on the
renderer's canvas.
The coverage lines are draped line sets on the draw port now, not
ground polyline primitives of the layer's own. A tile draws in sets of
120 line parts, as its primitives were batched; each part is an item of
its own (its id made unique in the tile) that picks its sequence
(`meta.pick`). A filter change redraws the sets in place, so the old
lines show until the new ones are ready. The selected sequence is one
set over the coverage, redrawn in place as tiles land; the tiles hide
their own lines of it, a show change made in place, so it shows
whichever set is drawn over which. The wait for the terrain-height
table goes: the renderer builds draped lines when it is ready. A colour
the layer cannot read is handed to the renderer as given.
Clicks no longer read the renderer's pick. The click dispatcher's event
gains `windowHit(width, height)`, the wider pick read as the canonical
id, the draw-set hit and whether it is the map itself. Street Level
routes its own sets' hits by their pick, anything else (a provider's own
drawing) by its id, as before; the ground under a click comes from the
event, and the ground click is told whether the map was hit. The screen
centre is aimed through the query port, a pick that fails counting as a
miss. Street Level no longer reads the scenePick service.
The Cesium draw port no longer lets a show queued while a draped line
built override one applied once it was ready, before the swap: the
highlight hand-over now depends on that.
lineCoverage leaves the Cesium allow-list; with it every Street Level
file named in this work is off the list.
Differences the contract does not let us avoid:
- The lines draw among the scene's primitives, not its ground
primitives: they now draw over other layers' clamped entities and
ground primitives, and win picks against them.
- The highlight builds asynchronously: a newly selected line is not
drawn for the frames that takes.
- Lines of other sequences in tiles that land after the highlight was
first drawn cross over it.
The photo marker and every provider's image cones are icon sets on the
draw port now, not billboard collections of their own. Each keeps its
pick id as the item id, so clicks route as before; each set is drawn
(empty) as soon as it is made, so the cones stay drawn over the marker
whichever is first given something to show. The horizon cull still runs
in the layer, against the ellipsoid lowered 1,000 m, and sends only the
items whose show changed; a quiet first cull of items about to be drawn
replaces the flags that held its callback back.
marker and sequenceCones leave the Cesium allow-list. The Panoramax line
click reads the camera height from the camera port.
A difference the contract does not let us avoid: the icons turn to their
bearing about local north (the contract's `course`), where the
billboards used the Earth's axis. Looking straight down nothing changes;
in a tilted view a cone now points along its true bearing on the ground
instead of leaning toward the pole.
The Street Level view maths no longer reads Cesium. The camera's place
comes from the camera port's pose; the visible box and the view focus
cast the query port's screen rays and meet them with the ground, the
WGS84 ellipsoid raised to the ground height, in geo; heights come from
the query port; the horizon cull for the marker and the cones tests
against an ellipsoid 1,000 m below WGS84 in geo and re-culls on the
frame port's pre-render. Ground clicks, the screen-centre aim, the
nearest-image point, photo framing, the coverage refresh and the ground
re-measure read the same ports and convert positions with geo.
geo's ellipsoid functions (toLonLatH, rayEllipsoid and those under them)
and horizonFrom take an optional ellipsoid, made with ellipsoidOf or
offsetEllipsoid; anything else, a map index included, means WGS84. Tests
check them against Cesium on raised and lowered ellipsoids.
view, index, cameraFraming, groundClick and selection leave the Cesium
allow-list. The Street Level entries are Cesium-free callers of the
unbound factories: given a viewer of a caller's own, with no renderer
bound, the caller loads ./render/cesium/unbound first. GhostMaps, which
uses the horizon cull and is still on the list, loads the camera factory
itself.
Differences the contract does not let us avoid:
- The ground under the camera no longer reads whether the globe is shown
(the globe port has no visibility getter). Where 3D tiles answer under
the camera they decide, as they did under Google 3D; elsewhere the
terrain answers, then the drawn surface below the camera. Over 3D tiles
shown on a map with the globe (and under other primitives at the
nadir) those now count as ground.
- Without depth-texture support the query port answers no heights, the
terrain included, so the ground then reads as the ellipsoid.
- selection and groundClick still read the click dispatcher's own pick
for now; they move to draw-set hits with the coverage lines.
flyToBounds takes an easing, as flyTo does: in the contract, the Cesium
port and the reference recorder, pinned by a new conformance trace.
The flights of radio, awareness, CCTV, submarine cables, cyclones, the
launch preview, installations, ALPR, street-level framing, recent
imagery, weather and world focus now go through the renderer's camera
port. Street-level framing cancels its own flight handle rather than
whatever flight is current. worldFocus.js no longer reaches Cesium and
leaves the allow-list.
Layer pose reads stay for each layer's own slice. The local GeoJSON
flight stays on Cesium: gods-eye-view/infrastructure is used with plain
Cesium viewers that have no renderer bound.
The slim Street Level core (#974) removed nearestImage from the Mapillary
provider. show_street_level and sl=mapillary links need it to open the
photo closest to a point, so this restores it on the slim core: Graph API
/images within 50 m, sorted by distance, first one that passes the imagery
filter. Kept as its own commit so it can be dropped if #974's removal
should stand.
- Google 3D: the OPEN button re-measures a ground whose tiles are still
loading (a few times, a second apart) and on a map change, not only
after the next camera move.
- Mapillary: two mounts on one host during the first download share one
build instead of leaking a second WebGL viewer.
- Retired floating-panel keys (v8 panelPos, panelFloatHintShown) are
dropped from localStorage; dead inline-position resets, the drag JSDoc
and the dead qa-ui-disposal observer branch are gone.
- Docs: z ladder, panel chrome, position storage and the fixture gate's
actual coverage; changelog fragment for #974 (old .gev-cache/mapillary
can be deleted).
- ru/es: the layer is named as everywhere else in the UI.
- Fixtures and test fakes: unused exports removed; a fake credit removal
of an absent credit no longer drops another one; the tile test reset
frees upstream slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Main gained three imagery providers (Google Street View, KartaView,
Panoramax), shared line-coverage, cone and photo-viewer modules, one source
lit at a time and the translated interface. Their shared modules still
carried what this branch removes, so the merge ports them onto it:
- lineCoverage.js is this branch's coverage.js made provider-neutral
(draped lines near the ground only, the selection drawn over them, key
and rate-limit blocking); sequenceCones.js is sequences.js the same way.
Mapillary, KartaView and Panoramax all build on them; Mapillary moves
back to providers/mapillary/ beside the others.
- No ground casting, mesh sampling, surface modes, FOLLOW, legend, prewarm,
orbit overview points (Panoramax's density dots included), stale-tile
swaps or water-filled point budget come back.
- Kept from main because the new providers need them: requiresMapStack and
attachMapStackController (Street View on Google 3D only), ground clicks,
openNearest with an optional provider nearestImage, openImage {frame},
reportError, the view-cone marker (now an SVG glyph), filters /
coverageLabel / sinceBasis, OPEN STREET VIEW, keyAlternatives and i18n.
- photoViewer.js treats the viewer as expanded when its wrap is full screen
or the iPhone popover, as EXPAND now is.
- The fixture browser gate keeps its 8 steps and adds one each for
KartaView and Panoramax; catalogs, docs, boundaries and format scope
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A mutation review (91, then 130 mutants) found tests that could not fail
(quick presses with synchronous fakes, a no-flight check with a provider
that never posed), and untested paths. New and rewritten tests kill 123 of
130 mutants; the 7 survivors are equivalent or harmless redraws.
- viewer: held-back loads for quick presses, stale sharp/flat loads,
close mid-load, ends checks for an older photo, WebGL retried per mount,
focus handed back, look direction kept on ›.
- provider: id-ordered pages with out-of-order indexes, page and probe
failures retried, overtaken lookups, cones re-centred on ‹ ›, leftover
imagery filters hide no line or cone, coverage hints, tile cache.
- source: 429 backoff and Retry-After under mock timers, hang timeouts,
the nearest query's parameters. policy: storage-host injection, FOV 360,
longitudes past ±180. panorama: a stub WebGL context (angles, lost
context, re-measuring). lineCoverage.test.mjs: tooHigh hint, passes().
- core: openImage({frame:false}) and openNearest leave the camera
(with a posing provider and a default-open control), KartaView's legend
and wording end to end; viewerHost supportsRenderModes.
- Fixed tick-count waits replaced by an until() poll.
- Browser gate fixture: odd photos archived (409 at storage2, served by
the proxy), the first lookup rate-limited (429, Retry-After: 0); the
line-click step asserts the camera stays and › skips the archived photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
main grew the Street Level provider registry while this branch removed it
(#982–#985: injected providers, an empty composition, the `r` switch field).
The registry, params, uiState and pick router come back as main has them and
the slimmed layer sits behind the provider contract:
- The core (index.js) drives providers as on main, without surface modes,
ground casting, FOLLOW, prewarm and nearest-image lookups. A provider's key
status is asked with a 10 s timeout and asked again on a switch-on while no
key is known.
- Mapillary is mapillaryProvider.js over the slim coverage, sequences and
viewer modules, which read the filter and the active flag from the provider
context.
- The viewer host mounts one provider adapter at a time, no prewarm.
- The panel has a chip per provider again (the pill switches the layer);
no legend, EXPAND stays the Fullscreen API.
- The contract drops what no provider implements: groundCaster, meshSampler,
getSurface/setSurface, nearestImage, prewarm, reportError, the legend and
surface fields of the UI snapshot.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- No pointer cursor over coverage lines (no other layer has one); a click
test replaces the hover tests.
- No legend: one source, one colour.
- The on-globe credit lives in index.js; credits.js is gone.
- Billboard glyphs are SVG data URLs with the same geometry, so tests need
no canvas stub.
- The tile cache keeps the 120 most recently used tiles, same 24 h TTL,
instead of a byte budget; listTileLayers was test-only.
- providers/mapillary/ is flattened into the layer and its policy merged
into one policy.js; the source's method list is a literal in the catalog.
- One fakeCesiumViewer for the layer tests.
- The fixture gate keeps the steps the unit tests do not cover: coverage and
credit, a rejected key, line -> cone -> photo, close, a keyless page.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- visibleBbox: no view-rectangle fallback or grid option; its one caller
always ranges the rays
- tilesForBbox returns the tiles; normalizeBbox takes arrays only
- viewerHost: no try/catch around adapter calls that catch for themselves
- coverage: counts come from the drawn sequences; no sequenceCount export
- one keyStatusLabel for the pill and the layer list
- no constructor source check, double-init guard or selectSequence /
clearSequence on the layer
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer now owns its Mapillary parts directly: the provider registry,
pick router, multi-provider UI summary, params codec helper and provider
context are gone. createStreetLevelLayer({ source }) builds coverage,
sequences, the nearest-image lookup and the MapillaryJS viewer itself; a
single providerOn switch keeps the share link's `mapillary` option (off
draws nothing), and getParams/setParams keep { mapillary, pano, sinceDays }.
No z0-5 overview points: above 60 km nothing is drawn and the panel says to
zoom in; the proxy now serves only coverage z11-14. Tiles come from the
visible ground within range of the camera, ranked from the ground under it
(no line-of-sight ranking or near-range padding). MapillaryJS loads on the
first photo; viewer prewarm is removed. Key status, a rejected key and a
rate limit share one `blocked` state on coverage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A duplicate scan of every module the PR adds (repeated 4-line blocks,
normalised) after gekh's dedup round left these:
- glyphs.js: the cone, ring and position glyphs share cachedGlyph(), wedge(),
ring() and dot(). Checked with a recording canvas: all 20 draw calls keep
the same path and fill/stroke state, so the glyphs are pixel-identical.
- panelPositionControls.js: one placeAt() for the three places that pin a
panel's top-left corner as a fixed window.
- tiles.js: one warn() for the three background-failure logs.
- Tests: src/testSupport/streetLevelFakes.mjs holds the provider snapshot
(uiState + presentation tests), the stand-in provider (core + controls
tests) and one real-ray pinhole camera (view + coverage tests, which had
each written their own). The coverage line-of-sight test still fails when
refresh() stops passing its focus.
- qa-street-level.mjs: one waitForCoverage() for the five copies of the
"on, drawn, settled, not key-gated" wait.
No behaviour change: unit 5862 pass, fixture gate 16/16, panel gate 5/5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>