Live counts repaint the rows many times a second; the index now reads its
headings at most once a frame, and only when a heading changes. The label
goes before the tick when there is no room after it, as in a right-to-left
language, and the ticks sit at the panel's inline end.
Co-authored-by: Manjunath Paparaju <[email protected]>
- Escape in the field closes the search alone, focus back on its button,
without folding the panel or leaving the cockpit.
- The category is the group's key (LayerRows' data-group), so a language
change keeps it; a group that goes away clears it.
- On and Off follow whether the layer is enabled, not its feed's state.
- The filter is a disclosure of two groups of toggle buttons: opening it
focuses the chosen option, the arrows, Home and End move, Escape closes
it, and it stays inside the panel.
- No layers match is translated, the search matches names only, and the
rows are filtered once per frame at most.
- A voice request to show a layer the finder hides clears the finder.
Co-authored-by: Manjunath Paparaju <[email protected]>
The group label is drawn on the page just outside the panel's edge instead
of over the rows; the panel clips what leaves it, so the label is teleported
to the body and placed from the tick. The finder shows focus as a soft ring
on the field's frame in place of the hard outline round the bare input.
Co-authored-by: Sameh Khamis <[email protected]>
The Data Layers panel gains a search field, an All / On / Off and category
filter, and a tick index down its side for jumping between sections. Both
sit beside the Data Library browse control.
Co-authored-by: Sameh Khamis <[email protected]>
Cyber and the phone keep their own cockpit layouts. Display and Radio take
their top from the layout pass, whose floor now matches the left rail, so the
panel's height still stops short of the briefing. The rail keeps its physical
side in a right-to-left language, the Live Signals rows use logical sides,
and rules for the launchers' old strips, which the rail hides, are gone.
Co-authored-by: Manjunath Paparaju <[email protected]>
In cockpit the left rail now shows Data Layers only: Visual's rail item
and panel are hidden there, as Authoring and Utilities are, and the
cockpit's own Display panel stands in for it. The rules that trimmed
Visual's groups in cockpit are removed as no longer reachable. If Visual
was open on entering cockpit, the rail's sliding highlight no longer
stays where its hidden icon was.
Co-authored-by: Sameh Khamis <[email protected]>
In cockpit, the Visual panel hides the HUD, detection, parameters and
3D-model groups, which the cockpit's Display panel already offers, and
the celestial ring toggle. It keeps Look, Map source, Scope, Bloom and
Sharpen.
Co-authored-by: Sameh Khamis <[email protected]>
Live Signals rows drop from 43.5 px to 36 px with less padding. The local
weather tiles lose the lit grid that showed between them, stand 5 px apart
as cards and shrink from 60 px to 53 px, so all four fit the shorter
window.
Co-authored-by: Sameh Khamis <[email protected]>
- The left rail shows Data Layers and Visual in cockpit view; Authoring and
Utilities are hidden along with their slots and panels, so no empty
pieces are left behind.
- With a panel open there, each icon left is its own island; a hidden
panel still open underneath leaves the rail in one piece.
- The cockpit's Display and Radio rail uses the main rails' 12 px spacing
and draws each icon as its own island while a panel is open.
- Contact and Live Signals stand shorter (min(27vh, 260px)); Contact's
buttons share the kicker's row and its subject runs full width on at
most two lines.
- Edge scrolling skips rail items that are not shown.
Co-authored-by: Sameh Khamis <[email protected]>
The cockpit's Display and Radio panels get the compact dark styling of the
rest of the shell, a header with the edge switch and collapse, and a rail.
Co-authored-by: Sameh Khamis <[email protected]>
The card skin stands aside under the Cyber HUD; the pills are decoration
for screen readers, the buttons carry aria-pressed, and Clean UI, an action,
has no pill. A collapsed Visual hides its new parts too.
Co-authored-by: Manjunath Paparaju <[email protected]>
The More sheet already shows the dock's Visual Presets tray right above
Visual, so the panel's own copy is hidden on the phone shell.
Co-authored-by: Manjunath Paparaju <[email protected]>
The panel's new headings, the scope opacity slider and the reset are
translated in every language, and the presets' names and descriptions use
the dock's translations. The cards' on/off pills take their words from the
locale instead of fixed English. VISUAL, the panel's name on the rail and in
its header, gets its own translation context: several languages had it as
"visible", from the satellite class of the same English word.
Co-authored-by: Manjunath Paparaju <[email protected]>
The Display panel is regrouped as Visual (Look, Overlay, Effects) with style
presets, a scope opacity slider and a reset to the default look. Scope
opacity is carried in share links as field 30 and as the legacy sco
parameter; 100 is the default and is left out of a link.
Co-authored-by: Sameh Khamis <[email protected]>
Phones and Cockpit keep their own layouts and do not show the switch. The
rails' name panels and edge mode run toward the middle in a right-to-left
language, and the switch reads its side again after the layout moves it.
Co-authored-by: Manjunath Paparaju <[email protected]>
Nothing replaces them on this branch yet, so the dock keeps them. The credit
pill and the HUD spacing built on it are left for a change of their own.
Co-authored-by: Manjunath Paparaju <[email protected]>
- The right rail now starts level with the left one whether or not a panel
is open on it. It used to rise to 4% of the screen when one was open,
which in Tactical and Cyber a top-right readout pushed back down, but in
Minimal (which has none) left it about 35 px above the left rail.
- Minimal no longer shows its full-width coordinate strip above the corner
coordinates block, which showed the same position twice; it keeps the
corner block, where the other layouts have it. This changes upstream's
Minimal layout.
Co-authored-by: Sameh Khamis <[email protected]>
When a panel opened or closed, the rails' labels eased their width, which
stretched and shrank every button in the rail. On the side rails the
labels now fold away and come back at once; only their fade eases.
Co-authored-by: Sameh Khamis <[email protected]>
Opening a panel from the labelled rail folds its pills to icons over a few
frames, and the highlight faded in at a pill's width and then shrank, as
did the open button's own fill. The highlight now appears only once the
open button is an icon again (square), its size changes at once rather
than easing, and the open button carries no fill of its own.
Co-authored-by: Sameh Khamis <[email protected]>
With a panel open, a rail's glass is drawn in pieces: one around the open
icon and one for each run of icons above and below it, with a small break
between them. The icons keep their places; the rail's icon spacing grows
from 2 px to 12 px to leave room for the break. The shadow rule for the
old lifted icon is removed.
Co-authored-by: Sameh Khamis <[email protected]>
The left rail no longer lifts its open icon out beside the panel title or
reorders the rest behind it. Every icon keeps its place, open or not, and
the rail's shared highlight slides to the open one, on both rails.
The rail also holds one height whichever panel is open: its offset now
allows for the stack rising by a different amount for a tall panel than at
rest.
Co-authored-by: Sameh Khamis <[email protected]>
The left rail holds Data Layers, Utilities, Authoring and Visual; the right
rail holds Context, CCTV and Street Level. A button in each panel header
moves that side's panels to the screen edge, with the rail as a row above
them, and scrolling at a screen edge steps through a rail's panels. An open
right panel starts just under the HUD readouts, and Context and CCTV take
the column's full height. The right rail stays level with the left column's
top whichever left panel is open, in both layouts.
Co-authored-by: Sameh Khamis <[email protected]>
The preview settled when the image had loaded, so the panel's <img> took the
src while it was still decoding and then faded in over 180 ms: every camera
click lingered on an empty box. The preview now settles once the frame is
decoded (a rejected decode still shows the loaded frame, and a decode that
never settles shows it after one second), and the fade is gone.
An application subject's camera step is now capped at its own update
interval plus 0.1 s rather than at 0.1 s, so at 500 ms its heading slew,
ground lift and anchor correction run at their configured rates; a long
stall still moves it no further than one late update. The built-in
views keep their 0.1 s cap.
When groundClamp turns false the lift the floor gave goes at the rate
it came, not at once. A HUD view with no speed has no speed readout,
and a progress line with no summary is hidden from assistive
technology instead of being an unnamed image.
DATA LAYERS keeps its curated core layers; regional and niche sources
live in the Data Library, opened from Browse data library at the foot
of the panel. Each entry is a JSON manifest in src/library/entries/
pointing at a live upstream (query API, provider-hosted file or tile
endpoint), so nothing is bundled and a self-hosted instance hosts no
data. Sources without CORS go through one allowlisted /api/library
route. Kinds: dataset (GeoJSON, CSV, JSON records, ArcGIS, partitioned
GeoParquet), tiles (XYZ, WMS/ArcGIS bbox export, terrarium relief) and
pack. Selections persist and travel in share links as lib=, separate
from the core layer tokens. Library rows get Zoom and Remove icon
chips that work while the layer is off, rendered through RailChips.
Strings are translated in every locale.
GEV itself registers no new subject: with no provider, the Cockpit offers
aircraft, satellites and vessels as before, except that the most recently
selected of them now wins entry.
- services.cockpitSubjects: providers ({kind, layerId, entryFace, priority,
isEntryAllowed, read, hold, release, hud}) are checked once by the
coordinator; frames and HUD views on every update; a throwing provider
ends its view or keeps the last HUD.
- Entry: the most recently selected subject wins, across all kinds.
- Camera: a frame may turn the ground clamp off, anchor exactly on the
subject and update every frame.
- A generic HUD: kicker, title, cards, always-visible source rows, banner,
a veil with light streaks (off under reduced motion) and a bottom
progress line whose close ticks merge.
- Text comes from the provider, already in the page's language
(./i18n/locale: getLocale, onLocaleChange).
- Rail and Transit read and hold APIs (getSelectedTrain/Vehicle,
getCockpitSubject, setCockpitSubject, focusTrain/Vehicle); a held
train's marker, card and route line are hidden, and its feed keeps
polling while held.
- ./layers/rail/paths is exported.
The notice sat at z-index 1001, under the Québec camera viewer (2000), which
covered its text and, with video playing, its buttons on a phone. It now sits
at 2001. On touch screens its buttons are 44 px tall.
AIS Vessels are keyed by the id their live source gives, with the MMSI as an
attribute: an MMSI can be shared, spoofed or reused, so two vessels with one
MMSI are now two vessels. Looking a vessel up or selecting it by MMSI still
finds it.
A share link made while a vessel is selected opens that vessel. A UUID vessel
id travels as 16 bytes in a new thing field (13). A shared thing that is not
reporting now says so in a sentence per kind, with its id (ICAO, NORAD, MMSI
or vessel UUID) on a second line.
Main added the News layer at the same places: both layers are kept in the
layer names, panel order (News stays last of Events), standalone sources,
voice manifest, credits, DATA_SOURCES and the CURRENT-STATE table. News took
share-link token 00 first, so Shipwrecks moves to 01 (ledger, registry,
CURRENT-STATE and the token tests). The catalog now has 40 layers and the
share-link registry 38. Shipwreck strings are added to the new Hebrew
catalog; the other catalogs keep both sides' strings.
Air accidents (#1584) is not merged, so comments, the changelog fragment and
CURRENT-STATE no longer explain the shipwrecks markers, card and picker by
it; the row-range test fixture is the shipwrecks row. CURRENT-STATE now says
the markers are one billboard collection and the period is stored swapped.
- RECORD is «רשומה», a record rather than a recording.
- Time abbreviations end in the geresh again (דק׳, שנ׳, שע׳, ימ׳), and the
counted forms agree with 1.
- Numbers after a Latin name, ordinals and units keep their order in RTL.
- Meaning, agreement and domain terms fixed across the catalog: cyclone
advisories and storm centre, sensor swath, track-up, cinematic, tropical
depression, pilot and sailing vessels, chips, metered billing, radio static,
airspace, NOT AN ALL-CLEAR, and the remaining review items.
- LOOK and OFF-NADIR are translated; {value} KM stays Latin as an instrument
readout, like KM/S.
- rtl.css shares the Arabic and Hebrew letter-spacing reset and drops the
duplicated Arabic rules; he.md and its glossary follow the catalog.
Tracking a civil flight asks Planespotters for that aircraft's photo, once
per aircraft, straight from the browser. The CONTEXT panel's CONTACTS view
shows it under the flight's name with the photographer's credit, as a plain
link to the photo's page. Only images on plnspttrs.net and pages on
www.planespotters.net are ever shown or linked. Military aircraft and a
converted TR-3B are never looked up.
Flight lookups (type, route, photo) whose source failed temporarily are
asked again after a 60-second cool-down; an answer, found or not, and a
permanent refusal stay final for the session. A route belongs to the
callsign it was looked up for, so a callsign change drops the old route.
Browser QA scripts that track a flight answer the photo lookup themselves,
so they never call the third party.