The incident card rounded the WFIGS size to whole acres, so every fire
under half an acre read "0 ac". The live perimeter feed carries many of
these (0.01 to 0.37 acres). Sizes under one acre now keep the reported
hundredths.
Cockpit entry no longer needs Contacts or both flight feeds: a civilian
aircraft needs Live Flights, a military one Military Flights. Contacts and
every other layer can be turned on or off before or during a session, and
turning off the ridden layer ends it. A Context mode change in flight still
blocks entry.
When the other air feed is off, Live Signals and the Contact card say
FLIGHTS FEED OFF or MILITARY FEED OFF · PARTIAL PICTURE instead of
presenting a partial picture as complete. Voice refuses entry with
subject-layer-off rather than contacts-inactive, and its tool description
says Contacts is not required.
Double-clicking the followed aircraft enters Cockpit through the same gate.
The Cockpit takes the scene's double-click before Cesium's stock handler,
which would otherwise untrack a followed aircraft whose model is a
primitive. The entry also shows under the Intel HUD readout, sharing the
Contacts button's face. A test keeps the classes the Cockpit adds to the
body from matching another element's rule.
- Host test switches AI Provider from chat Settings through the real
provider commands and checks the new mount keeps chat's context, frame,
Back to chat and focus on the provider choice.
- Drop the open and minimized branches of the carried presentation: the
provider choice lives only in Settings, so chat is never open then.
- One showChatSettings helper for the gear and the restore, and one
isStoppable helper for the live-or-error check in chat and the panel close.
NASA stopped delivering Suomi NPP data on 2026-11-02 (FIRMS news page).
With a live MAP_KEY on 2026-11-04, VIIRS_SNPP_NRT came back ok with zero
rows while NOAA-20, NOAA-21 and MODIS returned 57k, 49k and 11k, so the
source only spent one transaction per refresh. The proxy now requests
NOAA-20, NOAA-21 and MODIS NRT. The "N" satellite label stays, so cached
or archived Suomi NPP rows still read SNPP.
Tests count sources from the list instead of assuming four, and a
regression test keeps the retired source out of the production list.
Refs #849
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolves the DATA_SOURCES.md conflict by keeping main's rewritten Transit
and Radio bullets and restating the count for this branch: eighteen feeds
covering seventeen regions (the two Rio feeds share one region).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Switching AI Provider in Settings opened from chat rebuilt the voice
control, so Settings fell back to voice and the dock went idle, widening
the wings. The switch now carries chat's Settings, or chat itself, to the
new provider as it already carries the input mode; the conversation still
starts fresh and focus stays on the provider choice.
After a voice error, opening chat or closing the voice panel left the dock
red on ERROR, because both stopped only an active session. They now also
end a session left in error, which returns the dock to idle.
The attach menu promised up to 10 KB per file, but the attachments share
one 10 KB budget, so two 6 KB files were refused. The hint now says the
limit covers them all, in every locale.
With Voice Preview off the voice panel never opens on its own, and chat
Settings hid the voice preferences, so the Preview toggle, inactivity
timeout and model tier could not be reached by pointer. Chat Settings now
show them below the chat options, still in chat's frame and without the
voice tabs.
set_panel_open for voice-settings or voice-preview reported success while
chat's open state kept the voice panel hidden, minimized chat included. A
successful explicit show now closes chat, which keeps the typed session,
its running turn and its messages; reopening chat restores them.
TranStar's Content Usage terms prohibit copying, distribution and
external framing of its images without TxDOT's prior written
permission. The opt-in text only said the pack was off unless
CCTV_HOUSTON_ENABLED=1, without saying what an operator needs before
setting it. Say "enable only if you hold TxDOT's written permission" in
.env.example, the README, DATA_SOURCES.md, CURRENT-STATE and the
changelog, matching the NYC and Florida packs, and fix the column of the
.env.example comment.
The houston-cctv credit now reads "(Houston, when enabled)" and links
the Content Usage terms, like the Florida credit. Where the docs said
frames are "never stored or redistributed", they now say what happens:
frames are relayed on demand, buffered only per request, sent with
no-store and not archived.
TranStar's `dir` field is the side of the freeway a camera sits on, not
the way it faces. TranStar's own map script (translateCameraDirection)
shows it as "Traffic closest to the camera is traveling": South is
eastbound, North westbound, West southbound and anything else
northbound. The live catalog agrees: I-10 cameras are North/South and
I-45 cameras East/West.
Treating `dir` as a high-confidence facing pointed most Houston cameras
across or away from the road they watch, and dropped the "estimated"
marking. Map it to the travel direction instead (S 90, N 270, W 180,
E 0) as a low-confidence prior with the low-confidence pose, and keep
the id-hash fallback for None or unknown values.
The changelog fragment named share-link token 6 (sea marks); the layer
reserves 8. CURRENT-STATE said voice could toggle and query the layer and
listed it among the analyst record sources, but it is in VOICE_OFF_LAYERS.
Say voice is off for now, and that the layer covers FAA prohibited and
restricted special-use airspace only, not the UAS Facility Map / LAANC grids
or TFRs. A test pins these claims to the token ledger and the voice manifest.
A foreign Origin or Sec-Fetch-Site: cross-site request was answered and
counted against the client's 60-a-minute quota, and could start a refresh.
Run the keyless same-site checks the other map routes use before rate
limiting and cache acquisition; reverse-proxy forwarding headers stay
accepted. List the route with the keyless map routes in SECURITY.md.
The source dropped the proxy's stale flag and fetch time, so the layer row
read nominal and freshly updated through an outage, and the proxy served its
last snapshot indefinitely. Carry stale and fetchedAt through the source as
Fire Perimeters does, date a stale snapshot by its fetch, and stop serving a
snapshot more than 24 hours old.
An upstream answer whose zones all fail validation normalized to an empty
list, and paging that stopped at the page limit while the service still
flagged more records was accepted as complete. Both were cached as a fresh
snapshot for an hour and replaced the last good one. Treat them as failed
refreshes so stale-on-error keeps serving the previous snapshot.
From the whole-globe view the camera could end up facing empty space with
only stars on screen. Cesium's free look (Shift+drag) turns the camera in
place, and from 18,000 km the planet's edge is only about 15 degrees from
nadir, so a few drags turned it out of frame. The rolled pose was then
saved into the share hash, so a reload or shared link opened on stars too.
- Allow free look only below 1,000 km. Orbit, tilt and zoom are unchanged.
- Measure how much of the frame shows the planet's surface by casting a
32x18 grid of view rays at the WGS84 ellipsoid. While the scope mask is
on (the default) only the rays inside its keyhole count, since the mask
hides or dims the rest of the frame.
- When a camera move ends above 1,000 km with no ray on the surface, turn
straight down at the same position and heading. Limb glow and a sliver
up to about one grid cell thick can count as out of view. The end of a
move comes from Cesium's moveEnd and from a check of its own that
samples the pose every 250 ms after moveStart and acts once it has held
for half a second: at some of these poses the camera drifts by a
rounding error every frame, so Cesium never sees it stop and never
raises moveEnd. The zoom-out guard from #1522 keeps wheel and pinch
zoom-outs in view; this catches the other ways a move can end looking
away, such as a saved or shared view that did, or a
drag that Cesium turns into an in-place look below its 7,500 km
trackball height (one that starts on the stars, or a tilt drag with the
screen centre off the planet). Views with more surface, tracked or
locked cameras and the 2D and Columbus modes are left alone.
- Voice tilt and in-place turns of a free 3D globe camera above 1,000 km
stop when about a tenth of the frame still shows the planet (or about as
much as it showed when it started, two grid cells of sampling noise
allowed), never below about 1% of the visible frame; a view that already
shows less only keeps or gains what it has. A turn that cannot go half a
degree further without crossing that limit is refused with a reason
instead of reported as done, and a turn it accepts turns at least that
half degree. A turn that keeps or gains surface is not refused, even
after the window has been resized, except that near the limit, where the
planet's edge crosses the sample grid, sampling wobble can occasionally
refuse one (most often above about 15,000 km and on phone or ultrawide
frames); nothing then turns away from the planet. A turn that starts
where the last voice turn left the camera keeps that turn's limit, or a
higher one if the planet now fills more, so repeating the request does
not take any more; once anything else has moved or turned the camera, a
turn is measured from what is on screen. A request made while the camera
is tracked is judged by the pose voice's release of the follow camera
will leave, before that release, so a refused turn keeps the tracking.
The frame measure and the look-step limit live in src/globeInView.js,
shared by the viewer and the voice camera verbs.
Lifting one finger of a pinch removed the document listeners, so the
remaining finger's drag, which Cesium carries on with, stopped counting.
A gesture now ends only when its last pointer lifts or no touches are
left. And a gesture whose end never reaches the page (the window loses
focus mid-drag, or the page is hidden) left the listeners attached, so
a later unrelated drag counted as camera input; a blur or hidden page
now stops following it and drops its pending input.
Only canvas events refreshed the 1.5 s input window, and a touch only on
touchstart. Cesium follows a drag that leaves the canvas at document
level (in Firefox, and wherever there are no pointer events), so a long
gesture kept moving the camera after the window closed, and the pulses
rested mid-gesture. From a pointer or touch start on the canvas until
its end or cancel, moves at document level now count too; the listeners
go when the gesture ends or the layer detaches.
The cockpit turns Cesium's camera controls off and moves the camera on
its own, so a click, drag or wheel on the canvas moved nothing yet still
counted as the user handling the map: the cockpit's next move woke a
nine-second pulse burst. Input now counts only while the camera controls
take it, and a gesture still pending when another owner takes the
camera is dropped.
Re-pin the Realtime tool payload hash for the merged tree (voice geometry plus pitchDeg). To fit main's 55,500 prompt ceiling with Overpass on, the pitchDeg schema drops its -90..90 range (the runner already clamps to -89..-5, now pinned by a test) and its description is shorter. The Overpass prompt measures 55,492.
The heatmap now takes over above 4,500 km instead of 3,000 km, with
the cross-fade between 3,600 and 5,400 km. The markers band caps at
40,000 detections, which covers the ~40,000 in the padded view over
Africa at the low end of the fade, so weak fires still stay as markers.
To keep that rebuild near its old cost, markers outside the close band
read the anchor already built for each fire instead of the ground floor
cache: only the close band warms floors, so the lookup there always
missed. A 40,000-marker rebuild now costs ~55 ms, down from ~120 ms.
Rudy Celekli