When an application places live contacts itself, the tracked trail was cut at the layer's own delayed clock, which can run minutes behind the placed aircraft: the trail ended far behind the aircraft, and its head was dropped while that clock warmed up. The trail now reads the aircraft's time off its own reports at the point where it is drawn, for Flights and Military Flights.
A host-supplied placement's speed is how fast the marker is drawn. While it
waits for its fixes to catch up it stands still at 0, so tracked-aircraft
panels and the cockpit readout showed 0 m/s for an aircraft in flight.
displayedKinematics now takes derivedFromPlacement: when the drawn speed is a
placement's, the reported ground speed is shown, and the placement's only when
nothing is reported. The placement speed still drives motion and dead
reckoning. Civil and military tracked descriptors pass it from the new
_drSpeedPlaced scratch, which placeLiveAircraft sets.
Main brings satellites and vessels moving every frame, smooth rewind for
contacts, global clouds drawn to the level a feed names, and search for
degrees-minutes-seconds, UTM, MGRS and plus codes. They keep this branch's
renderer work: satellites write their reckoned positions into the points set
once a frame; vessels move every frame and ask for frames from the camera pose
and canvas, and a vessel not there yet is hidden through its icon; flights and
military keep the branch's rendering, with main's timeline fixes, trail top-up
and grounded lift; the cloud tiles keep their infrared transfer. The timeline
history module uses the geo helpers instead of Cesium, and main's new tests
use the draw port's items.
A snapshot timeline may declare spanMs: each record of a snapshot at a
time then carries its own fixes from spanMs before the time to spanMs
after it. Flights, military flights and vessels following the clock are
placed on those fixes, so a seek or a move back within the fixes loaded
is no jump: nothing is cleared and play does not wait. The step there is
asked for once and stands in for every contact; those it has keep their
place. Fixes are merged across snapshots at least 20 s apart, at most
240 a contact, and a contact is not drawn more than a minute before its
first fix.
A fix that moves while the reported speed is 0 or stale used to leave the
aircraft frozen, then jump it kilometres at once. The step between fixes now
measures a jump, and the drawn speed bounds the recovery.
Civil and military aircraft were drawn a fixed 30 s (15 s) behind real time
while anonymous feed reports arrive about 90 s old every 30 s, so every
contact dead reckoned about a minute past its newest report and snapped
when the next one landed (several km on a turn), and the tracked trail,
recorded from those drawn positions and patched as reports arrived, kinked.
- The display delay (data/displayDelay.js) is the 90th percentile of the
newest 256 report lags plus 5 s, between the layer's floor (30 s, 15 s)
and five minutes, slewed at most 0.2 s/s up and 0.05 s/s down. Icons,
the renderer's live motion clock, labels, HUD, detection, the tracked
camera and the trail read the one delay; following the world clock
draws with none and deliveries leave it alone.
- Between two reports an aircraft flies a biarc (data/fixCurve.js) that
passes through both and leaves each along its track, sent as contract
arc segments; the trail is the reports joined along the same curve, so
the icon sits on it. Nothing drawn between reports is kept.
- A report a coasting contact missed is eased onto from where it would
have been that frame (at least 3 s, at most 30% over its speed, within
20 s); over 5 km it jumps. Past its newest report a contact coasts
straight on: a turn rate averaged over earlier reports outlived the turn.
- Forward synthetic fixes no longer block real reports older than them,
and a history keeps 24 fixes.
- A feed simulation (testSupport/aircraftFeedSim.mjs) checks both layers
against a 90 s late feed, a fallback switch, repeated reports, outages
and the world clock.
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.
Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
Flights, Military Flights and Local ADS-B draw each aircraft with the fleet
model its ICAO type, class or emitter category selects, scaled to the type's
length, built from the up-front loaded bytes. The eight third-party aircraft
models and their attribution are removed; every shipped model is now the
project's own.
Upstream's layers and changes are carried onto the ports, with no Cesium
outside src/render and no reach into the viewer:
- Shipwrecks draw as one icon set, clicked through the input dispatcher.
- News draws through draw sets, the camera port and the input dispatcher;
its beacons pulse each frame through the frame port.
- The scene occlusion probe moves into src/render/cesium and reaches
detection through a new application hook, createOcclusionProbe; its
private Cesium reads go through internals.js.
- Flight and military trails, the stale and SIGNAL LOST cue, coasting and
following the world clock run on the draw and frame ports. GPU icons
follow the scene clock while the world clock is followed, and fade when
stale. A report that holds is not planned again every tick.
- Vessels are keyed by their record id.
The stub boot now enables military, shipwrecks and news as well.
A live source may now declare a timeline: it can answer a snapshot at a
given time (source.timeline = { coverage(), stepMs, subscribe? }, read by
readSnapshotTimeline). While such a layer is on it follows the world clock
and registers the coverage. At the live edge it polls exactly as before;
away from it the layer asks for getSnapshot({ ...query, atMs }) at the step
at or before the clock time and shows that snapshot instead of polling.
src/time/snapshotTimeline.js owns the following: a seek, time going
backwards or leaving live replaces every contact with the snapshot at the
new time (play waits on it, for at most 8 s); playing on keeps one
snapshot ahead and gates play on it, applying those snapshots as polls so
contacts move smoothly; outside coverage the layer is empty; back at live
it is cleared and polls at once. One load at a time, and a load the
source drops for a newer one is not a failure.
While following, aircraft are drawn at the clock time with no render
delay, records and absences are judged at the clock, track requests carry
atMs, and vessels move between fixes along the great circle. The world
clock counts jumps (seeks and returns to live) in getState().
A source with no timeline never follows the clock, and every layer stays
live, unchanged.
The trail no longer joins a day of history into one line. It lifts the pen
across a gap of more than 48 minutes, an implied speed over 1,500 kt, or a
report without altitude (a parked aircraft within 0.1 nm for under 3 h stays
joined), and every history point is kept as its own segment. History never
gets an invented altitude. The live end is the path the aircraft was drawn
along, thinned to its shape, so it no longer cuts corners through turns; a
late report trims what was drawn after it. Old segments are frozen in chunks,
so a 2,000-point trail costs about 0.1 ms a frame.
A tracked aircraft that misses an update shows STALE and is dimmed. It keeps
flying on its last speed and heading for five minutes (at most 1,500 kt),
then stops, dimmed, labelled SIGNAL LOST with the time since its last report,
and is kept for ten minutes after that report so the camera keeps its target.
Aircraft on or near known ground hold at their last report instead of
coasting. Military flights follow the same rules.
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
The renderer contract gains an optional event on model draw sets,
`on('loadFailed', (id, message) => ...)`, beside `ready`: a model's url
failed to load, once per failed load. The item stays in the set drawing
what it drew before; removing it and adding it again tries at once. A
renderer that cannot tell a failure may never fire it.
The Cesium draw port fires it once Cesium is done with the frame it
raised the error in, and not for a load that was superseded or whose item
went. The stub fails urls under `stub-fail:`, telling each load once. A
conformance check (`draw.models.loadFailed`) runs on both, with a model
url the dev server does not serve for Cesium.
The flights and military layers use it in place of rewriting every
unloaded model every 5 s. A fleet model whose load failed is removed and
added again 5 s later. The tracked model gets back its per-selection
budget: a failed load is let go and tried again 1.5 s later, and after
three failures the contact stays 2D until another is selected, as
before the models moved onto the draw port. A good load retires the
budget, and a model that loads after all is kept.
The flights and military layers now reach the renderer only through its
ports: motion, queries, state, tracking, enrichment, evidence and policy
read the camera pose, project through the query port, request and
suspend frames through the frame port, and key per-frame caches on the
frames drawn rather than the scene's frame number. Policy is plain data,
the enrichment view test is pose-based, and the tracked aircraft is an
icon in a draw-port set with a plain holder standing in for the entity
that Cockpit, the tracked card and share links read.
The mesh floor sampler can sample through the query port, excluding
named draw sets, and both layers use it that way. A pick of another
layer's tracked icon is never taken for one of a layer's own contacts.
Twelve layer files leave the Cesium allow-list.
The two aircraft layers' fleet and tracked models are now draw-port
models sets made each layer lifetime, re-posed and restyled in place,
instead of Cesium models in a collection of their own. Model records are
plain data; picks name the set and the contact, readiness comes from the
set's ready event, the IR boost restyles in place (unlit, white tint,
full blend), and the drawn scale comes from the camera pose and pixel
floor. Fleet writes go out together at the end of each tick, before the
icons they replace, and a failed write hands the contacts back to their
icons. A model that has not loaded is rewritten every few seconds so the
renderer can retry it, which replaces the tracked model's load-failure
budget. Models load off the tile-contended job queue, as before.
aircraftModelLayer.js, modelRecord.js and the flights and military
lifecycle and testing files, plus flights rendering.js, come off the
Cesium allow-list.
The shared trail renderer draws a trail's history and its live head as
lines in a draw-port set, geodesic for the history and straight for the
head, each dimmed behind the surface in its depth-fail colour, and
leaves the Cesium allow-list. The flights and military trail heads are
drawn through the trail each frame from the frame port instead of
entity callbacks, and the local ADS-B head uses the same head line. A
head given while its trail is hidden waits until the trail shows.
Geodesic lines are cut a step a degree of arc, with at least 64 steps
over the line, so a long trail of short legs costs its positions rather
than 64 vertices a leg.
The civil flights and military layers now draw their contacts as one GPU
icon set each from the renderer's draw port instead of a custom primitive.
Each contact is an icon item whose motion is the dead reckoning the layer
plans (interpolation between fixes, warm-up and coast arcs, or a hold),
with its nose gliding onto a new course at the fleet's slew cap. A
contact's item is replanned when its motion runs out, grounded contacts
are pinned with held motion, and focus de-emphasis is written per item.
The near/far image switch follows the renderer's pixel ratio, and writes
made during a fleet tick reach the set before that frame draws.
The aircraft icon layer and the flights icon part no longer touch Cesium
and leave the allow-list. Clicks resolve the draw port's pick ids as well
as the ones the tracked model and entities still carry, so selection,
follow and share-follow work as before.
Flights and military follow their tracked aircraft with an
entityFollowTarget: framed in ENU from viewFrom, never closer than
150 m, presentation read from the drawn entity's record. Satellites
follow in Cesium's autodetect frame. The layers' own framing
(applyTrackedCameraFrame) goes; the port's follow has the same
close-range rules, and trackedCamera.js no longer imports Cesium.
The port's helper entity draws nothing: its point's outline is
transparent too, and click and voice picks of it count as picks of
the target's drawn entity. The fake camera binder follows when the
fake has Cesium's entity tracking.
Every layer and tool bound its own ScreenSpaceEventHandler and picked the
same click again: with the usual layers on, one click ran about 26
scene.pick and 2 drillPick passes (120-215 ms in NYC with 18 layers). Pointer
input now comes in through src/input/dispatcher.js, one handler per scene.
A click is picked lazily and at most once per kind of query, and every
subscriber reads the same ClickEvent (pick, hit, id, ownerId, gesture,
drill, ground). The same click now costs 3 picks and 2 drills, 17-70 ms.
- Ambient onClick subscribers run only while no tool holds the pointer,
checked once per event; tools subscribe with their lease. Moves and
releases always reach ambient subscribers, so hover and drags end cleanly.
- Camera input and the viewer's stock select/track clicks are ref-counted
holds (suspendCamera, suppressStockClicks). The dispatcher owns the
controller's enableInputs, so a Cesium flight that ends no longer turns
input back on under a drag or the cockpit.
- The draw tool, imagery box, CCTV gizmo, cockpit, directions and every
selecting layer use it; bindTrackingClickGesture is gone (the gesture is
on the event). A source scan forbids new handlers, enableInputs writes and
stock-click removal outside the dispatcher.
- The sensor-style pick correction transit had now applies to every layer.
- Radio's 8-pick near-miss ring is one 17x17 windowed drill.
- A missed pick passed to pickContact is no longer picked again, and a
touch tap's contact search shares the click's drill.
- A gizmo drag whose release Cesium never reported ends on the next press
instead of leaving the camera held.
The dispatcher is exported as ./input with the pointer-lease functions, and
documented in docs/APPLICATION.md.
The flights icon planning and presentation move into
`createAircraftIcons` (src/data/aircraftIconLayer.js), and the motion
regime both layers dead-reckon from into src/data/aircraftMotionRegime.js.
Flights keeps only its grounded-floor pass on top.
Military now draws every contact as a row of that icon set, like
flights: the billboards, the cull positions and the rotation-pass
signature go. Tracking hides the row and untracking re-plans it from
the tracked course. Queries read the drawn row position and judge the
horizon as the shader does. Snapshots that arrive before init or after
destroy are ignored, and per-contact lookups find no contact then
instead of throwing.
With about 120 live military contacts, preRender p95 drops from
0.7-0.8 ms to 0.2 ms on the same views. Render time and frame gaps are
unchanged or slightly lower.
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.
Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).
- The weather clock takes its time from the world clock and drives its
replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
transit, GNSS, Recent Imagery, street level, the HUD and the celestial
ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.