The shared Cesium ports gain readPixels and releaseUnused, on both the
conformance renderer and the application's.
readPixels reads the drawn frame off the canvas at once, cropped in CSS
pixels and scaled from the canvas's CSS size, through one reused 2D canvas.
A canvas with no size reads blank.
releaseUnused trims every 3D tileset's cache, and after the next drawn frame
frees the globe tiles that frame did not draw. Cesium trims the globe's
cache only while tiles load, so a settled view would otherwise free nothing;
the trim goes through internals.js. The reader canvas is dropped too.
Two new checks, renderer.readPixels and renderer.releaseUnused, run on
Cesium and the stub.
whenSettled moves from the conformance renderer into the shared Cesium
ports, unchanged but for what it waits for, and the application's renderer
gains it. A hidden globe loads nothing, so it no longer holds settling up:
the application hides its globe under photoreal tiles. Shown 3D tilesets in
the scene must have loaded what is in view, named 'tiles' while they have
not. Disposing the ports ends the watches under way, which fail as
destroyed, as the conformance renderer's destroy did.
It waits for the globe, the scene's tiles and what the draw sets hold, not
for what layers still draw through the viewer themselves.
frame.setTime moves from the conformance renderer into the shared Cesium
ports, so the application's renderer has it. It moves the clock and asks for
a frame, which on-demand drawing needs. It no longer stops the clock: the
conformance renderer stops its own at creation, and the application's clock
keeps whatever state its owner gave it.
The shared Cesium ports gain draw.atlas, draw.clampState and
draw.on('clampState'), on both the conformance renderer and the
application's. An icon names an image by atlas slot; it draws once its atlas
holds the slot, and registering an atlas again rebuilds the icon sets that
read from it. A generated image with a key is one texture however many icons
draw it.
clampState is draped unless a shown 3D tileset is in the scene: the port
draws clamped items where it is given them and drapes nothing onto tiles yet,
so over tiles it says overlay. A change is told after the drawn frame that
shows it, never on subscribing.
A new draw.atlas check registers an atlas after its icons and picks them;
it and draw.clampState now run on Cesium.
camera.controls now maps the contract's CameraControls onto the scene's
ScreenSpaceCameraController: the enable flags, zoom distances, zoom
factor, coast as Cesium inertia (decay seconds, 0 for no coast), the
collision switch, the tilt limit as the upper end of pitchRange, and the
zoom bindings by name. suspend and enabled use the scene's shared input
holds, so they count with the input port's and the dispatcher's.
A follow's zoom hold now composes with the settings: minDistance and
coast.zoom read and set what the follow gives back, a higher floor takes
effect at once, and a follow never lengthens a shorter zoom coast.
The ctrl+wheel binding check reuses the controls' binding helpers, and
the controls checks run in the Cesium conformance set, the settings one
in Node as well.
The Cesium quality port supports pixel ratio, multisampling, shadows,
3D tile and terrain detail and the target frame rate, each applied when
first set and nothing changed before. Detail scales each tileset's and
the globe's own screen-space error and gives it back at full detail;
while tile detail is lowered, tilesets added later follow it. Frame
signals carry each drawn tick's CPU time, size, loop mode and holds.
The application and conformance renderers have the port, and the
conformance page runs the quality checks against Cesium.
VisualEffects defines each preset on the renderer and keeps its own
records of intensities and parameters, written through to the port, so
crossfades, the anime sky fade, bloom and sharpen behave as before. The
renderer animates the animated styles. Sensor picks read the style
records instead of the renderer's stages. The application renderer now
has the effects port and its capabilities.
The shared Cesium ports gain credits, on both the conformance renderer and
the application's. list() reports what Cesium owes as plain data: its logo,
its static credits and the last drawn frame's imagery, terrain and tile
credits, read from the credit display through internals.js, with the
credits Core adds listed as given where the display shows them. addStatic
shows a credit through Cesium's display, as markup built from the plain
data with every value escaped and only web links kept, so attribution stays
on screen. change fires when Core adds or removes a credit, and after a
drawn frame whose Cesium credits differ from the last one's.
src/render/creditMarkup.js reads markup credits as plain data. The credits
listener check moves out of renderer.listenerRules into its own check, so a
renderer without every port can run it; it and the credits check now run on
Cesium.
setFov holds the vertical angle it is given across resizes (Cesium
keeps the wider one), waits for a frustum with a field of view, and
rejects angles outside (0, pi). matrices returns Cesium's view and
projection matrices, ECEF to eye in 3D, the only mode Core runs. The
conformance run checks both on Cesium.
The Cesium camera port follows a target with Cesium's own entity
tracking, on a hidden helper entity per target, and gains followed,
followFramed, followOffset and followChanged. A target with a minimum
range gets GEV's close-range rules, moved here from trackedCamera.js:
an exact first framing, no zoom coasting, a zoom floor, and an eye that
never crosses through the target. followChanged now fires only when
what is followed changes, on the stub too. No layer follows through the
port yet.
The Cesium camera port gains move, look, rotateAround and zoom, and the
browser conformance run now checks them, the lookAt-frame commands, the
changed thresholds and moveEnd (timed by the clock, not a frame count).
Orbit, the Bhote Koshi focus and cinematic, the launch zoom anchor and
replay chase, the camera verbs' motion tick and roll levelling, and
voice zoom write through the port.
The Cesium camera port moves into render/cesium/camera.js, with the
listener list and position conversion shared from common.js. It now
covers flights (flyTo, flyToBounds, cancelFlight, flying), lookAt and
release, command hooks, and a flightEnd event for the flights it starts.
A flight's end that Cesium raises inside one of the port's own calls is
delivered once Cesium's call returns, so its callback sees the flight
let go of. A flight Cesium declines to start, mid scene-mode morph,
ends as cancelled instead of never settling.
Flight traces run in Node on the recorder's headless camera with a
virtual clock; the browser harness keeps the instant traces.
The startup fly-in, landmark and viewport flights, share-link restore
and the shell's camera state now go through the port. camera.js and
sharelink.js leave the Cesium allow-list.
The first camera-family slice. The camera port's events move into a
shared module (render/camera/events.js) that the stub and the Cesium
port both use: listener lists, delivery with errors reported, and the
contract's per-listener `changed` measure.
The Cesium port gains:
- camera.on: `changed` measured per listener on every tick, where Cesium
measures its single threshold (the counts match Cesium's own at each
threshold); moveStart and moveEnd relayed from Cesium's camera;
- camera.viewRectangle, in degrees (now in CESIUM_CHECKS);
- lon and lat in pose, and NaN where Cesium has no cartographic position.
Code that still holds the viewer reaches the renderer through
rendererOf(viewer); the application renderer binds it on create and
unbinds on destroy.
The HUD reads its telemetry from the camera port and no longer imports
Cesium (off the allow-list). The share link writes the hash from the
pose. Its restore path stays on the viewer's camera for a later slice.
Behaviour changes:
- The share link listens to `changed` at its own 0.5 threshold, not at
whatever global threshold layers had set, and also to moveEnd, so the
hash always catches up with where the camera comes to rest.
- The HUD's and share link's camera callbacks run from the port's single
relay, ahead of other moveStart/moveEnd listeners, and a throw in one
is reported to the renderer's error listeners instead of escaping from
Cesium's render.
The Cesium renderer now creates the input port and exposes it as
renderer.input. The input dispatcher becomes an adapter over the port:
one port listener per event type, fanned out to its subscribers with the
ownership check read once per event, keeping the legacy event shapes.
- Ctrl+wheel zoom is switched on through renderer.input.ctrlWheelZoom.
- A dispatcher made for a viewer with no port creates its own port with
takeStock: false, which borrows the stock select and double-click
follow only while they are suppressed.
- The stock actions see the press as it began: a click whose press
started while select or follow was held off never runs them.
- A scene accepts one input port; cesiumInputOf(scene) returns it.
- Releasing one mouse button while another is held no longer gives the
held button a click. Cesium still ends that press.
Frame-phase and draw-set ready listeners now run in subscription order,
skip one removed during delivery, defer one added during it, and hand a
throw to the renderer's error listeners (or reportError) instead of into
Cesium's render loop. The renderer gains on('error' | 'contextLost' |
'contextRestored'); Cesium cannot restore a lost context, so it never sends
contextRestored. Dispose clears every list. renderer.listeners joins the
Cesium checks.
The governor no longer writes the Cesium scene's render mode itself: each
owner holds the renderer's frame port once, requests go to it, and the
port is the one place the loop's mode is set. The port now also keeps
the loop from redrawing for scene time alone, which the governor did.
The application installs the governor as soon as its renderer exists and
holds the loop continuous ('boot') until its tools are up, where the
governor used to be installed, so boot draws as before. The hidden-tab
suspension goes through the port too, and the application's renderer now
has the whole frame port.
The frame port now does everything the contract asks of it on Cesium:
preUpdate says whether the tick draws (Cesium's own render test, read
live until the tick is over), holds are counted per reason, and suspend,
target fps, renderNow and diagnostics are real. Releasing the last hold
asks for one more frame.
whenSettled also waits until Cesium stops redrawing on its own. Each
request or worker task Cesium completes queues a redraw (a terrain
picker build after the camera moved, say), which no loading flag shows,
so it now waits for quiet frames and then a short stretch in which the
loop draws nothing by itself. It is bounded by its timeout, names a
stopped loop, and ends on destroy.
The app renderer still leaves out the members that steer the loop:
the render governor and the page's visibility handling own those
settings until they move onto the port.
The new frame.prediction check compares the preUpdate answer with what
each tick drew.
The Cesium renderer now has every QueryPort member: picks and drill
picks, depth and globe picks, rays, projection, occlusion, heights now
and streamed, clamping and ray casts. Capabilities come from what the
scene supports (depth textures for pickPosition, sampleHeight,
finestHeights and rayCast), in both the conformance and app renderers.
- Picks skip unpickable and hidden items, and report each item once. A
pick under an unpickable item stops at anything that hides the rest.
drillPick's limit counts after that filtering, so 0 gives none.
- Height queries and ray casts see through sets not drawn with
includeInHeightQueries, and through the sets a caller excludes, by
their items' pick ids. The list is built once per change to the sets.
- `tiles` samples and casts run with the globe hidden for the call;
`terrain` casts use the globe alone. A sample reports whether it came
from tiles, terrain, the ellipsoid or a set.
- A position clampToSurface cannot read is a miss, not a failed batch.
- Terrain on an ellipsoid is height 0. Before, sampling it threw, for
want of tile availability.
whenSettled also waits for icon images, and fails when one cannot load.
The conformance checks that pick or query settle first, because a
renderer answers from what it has loaded; the stub settles at once.
The Cesium renderer now passes 14 checks in the browser, and its
visual references are unchanged.
The conformance page can now run the logic checks against the Cesium
scene renderer as well as the stub. CESIUM_CHECKS lists the checks of
the ports Cesium already has; each phase 2 migration adds its own, so
the suite shows how far the renderer is through the contract. All eight
listed checks pass in the browser, and the stub still passes its 69.
A harness frame is one tick of the render loop, observed through
frame.on('preUpdate'). It asks for no frame itself, so a check's own
requestRender is what makes a tick draw, and a loop that stops fails
the check after five seconds instead of hanging the run. The harness
frees each WebGL context on destroy.
FrameTime.dt is now measured rather than fixed at 1/60, and renderOnce
honours timeoutMs. A scene renderer made without the models capability
has no draw.models.
The frame, draw, camera, query and capture ports move out of the
conformance scene renderer into src/render/cesium/ports.js, unchanged.
The app's transitional renderer, now src/render/cesium/appRenderer.js,
builds the same ports over the full viewer; it still leaves out globe,
whenSettled and setTime, which would misreport photoreal tiles and stop
the app clock.
Disposing the ports now settles a pending renderOnce and detaches the
draw sets, so a model that loads after destroy is destroyed rather than
added to a destroyed collection. A viewer whose ports fail to build is
destroyed with its credits.
Checked in a browser: the app boots with one credits element, and all
eleven conformance scenes match their references exactly.