Resolve the source-pack conflicts with Statens vegvesen (keep both packs).
The Norway pack's 900 default pushed the per-pack defaults to 5,204, past
the 4,500 catalog cap this PR enforces, so raise DEFAULT_CCTV_MAX_SOURCES
to 5,500 and CCTV_MAX_SOURCES_CEILING to 6,000.
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Imported metadata stays inert: descriptions, native labels, properties and
KML extended data are dropped from every entity; names are kept as short
plain text. GeoJSON loads with a describe that builds no HTML, and
simplestyle (including marker-symbol) is dropped, so no icon asset is
fetched for a file and GeoJSON draws in its row's color.
- Bound geometry before loading: features and vertices are counted in the
parsed GeoJSON, the KML document and while reading GPX, and a file over
20,000 features or 250,000 vertices is refused before Cesium builds it.
- Imports run one batch at a time, so concurrent picks or drops cannot pass
the 12-file cap.
- Fly-to framing walks long tracks by index instead of spreading them into a
call.
- Fly-to is an immediate navigation through the application shell; the fly
after an import is a deferred navigation stamped when the batch starts and
re-asserted just before flying.
- Dated imports never change the shared clock: imported sources expose no
clock, entities are available for all time, and a KML gx:Track is drawn as
its line.
- GPX is read into GeoJSON with one line per track segment, without times.
- KML/KMZ rows show a hatched swatch (they keep their own styles); keyboard
focus is kept on the same control after hide/show and moves to the next
row after remove.
- Unit regressions for each, and the rendered QA now imports hostile
metadata, dated KML/GPX and a two-segment track, and fails on any request
for a file's contents or icon assets, a clock change, or surviving
metadata.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DISPLAY ▸ Import (and drop onto the globe) puts the person's own files on
the map as Cesium data sources, clamped to the ground, one color per file,
with a row to show/hide, fly to or remove each. Files stay in the browser
for the session.
KML/KMZ are sanitized before Cesium reads them (network links, remote
icons/styles, models, photo/screen overlays and balloon HTML removed; KMZ
images served from blob URLs), so an imported file cannot make the page
fetch anything. KMZ is read with a small dependency-free zip reader on the
platform DecompressionStream, with a zip-bomb limit. Bounded file size,
entity count and number of files.
Tests: src/data/geoFileImport.test.mjs, src/ui/geoFileImport.test.mjs.
Gate: scripts/qa-geo-import.mjs. The import half of #890.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Closesbilawalsidhu/gods-eye-view#155. The first Italian cameras: the 13
webcams along the A22 from the Brenner Pass to Modena.
The camera list is one keyless request to the Open Data Hub (NOI Techpark)
tourism API, which republishes Autobrennero's own list with coordinates
and kilometre markers. Frames are the operator's stills, refreshed about
once a minute, and only each camera's own WebCamImg/km<N>.jpg is
registered. The catalog fetch refuses redirects and is size-capped.
The road climbs from ~20 m in the Po valley to ~1,370 m at the Brenner
Pass, so ground elevation comes from a per-kilometre table sampled from
the Copernicus GLO-90 DEM instead of one flat prior. Headings use the
id-hash fallback at low confidence. CCTV_A22_ENABLED=0 disables the pack.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fleet draws a grounded contact at its delayed position lifted onto the floor under it, but a new billboard was created at the delayed position without that lift. A taxiing aircraft whose reported fix sat lower than the ground under its delayed position started on the fix's floor and then rose on the next fleet tick. Creation now applies the same floor the fleet pass does.
The fleet renders behind real time, so a newly seen aircraft is displayed at its fix projected back to that delayed time. Its billboard was created at the raw fix instead, so it appeared ahead of where the next fleet tick put it and then jumped back about one render delay of travel before moving forward.
- Send 20 points per request, not 50: above ~20 Kartverket answers the
extra points from contour lines (hoydekurver) or not at all. At 20,
nearly every camera resolves from dtm1, so the null-retry pass is gone.
Eight requests in flight keep a cold lookup ~6 s.
- Cache misses: positions with no height are not asked again for 6 h.
- Transport failures: the first 429, 5xx or network error stops the
lookup with no retries, and no lookup starts until the backoff ends
(Retry-After when sent, else 10 min; bounded to 1 min-1 h).
- Budget the 12 s wait from the start of the loader, catalog fetch
included.
- Record answers only for the points each request asked about.
- Send the CCTV User-Agent; link CC BY 4.0 in the credit.
- Docs: bridge cameras sit at the water surface, below the deck.
- Tests: batching, 8-in-flight cap, request count on failure, the shared
deadline, Retry-After bounds, null TTL, backoff, the -20 m bound and
each water marker on its own.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A mutation review left 18 earlier survivors; each now has a test that
fails with the mutant applied:
- the expanded viewer returns into the panel on shrink, close and destroy
(the fake DOM had no parentNode, so reinsertion was never exercised); the
fake DOM gains offsetParent and a MutationObserver that honours its
options, and a <body> child added while expanded goes inert;
- each pose moves the marker, drives FOLLOW and selects a new sequence;
close() retires an open still mounting or opening; a provider toggled
while the layer is off activates nothing; the adapter drops late and
superseded poses;
- share-link defaults: "any date" (0 days), the codec max pinned to the
filter's MAX_SINCE_DAYS (layerState cannot import it across package
boundaries, so a test ties the two), Mapillary on when a link omits it;
- Esc that something else handled, or typed in a field, keeps the
selection; a key problem outranks LOADING on the pill;
- the marker's terrain height (mesh, DEM, clamp then re-place);
- proxy: LRU memory cache and its half-budget rule, Retry-After capped,
a request after a cancelled fetch starts a fresh one;
- date-line tile ranking with and without focus; the horizon cull idles
while the camera stands still; the old zoom goes as soon as the new one
lands; a rate limit holds every refresh inside its wait.
One real bug found and fixed: Esc inside a contenteditable cleared the
selected sequence (selection.js now ignores isContentEditable targets).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cover every Norwegian station-based city-bike system with an open GBFS
feed: Kolumbus Bysykkel (Stavanger) and Farte Bysykkel (Skien/Porsgrunn)
through Entur Mobility, and Bysykkel Lillestrøm through JCDecaux
Cyclocity.
api.entur.io and api.cyclocity.fr join the GBFS allowlist, each kept to
its GBFS path prefix since both hosts front other APIs. Entur serves its
feeds without a .json suffix, so the endpoint checks accept either form,
and requests to Entur carry the ET-Client-Name header it requires.
Attributed under NLOD (Entur) and Licence Ouverte (JCDecaux).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add Norway's three Urban Sharing city-bike systems to the Bike Share
layer and get_bike_share. The feeds are keyless GBFS on
gbfs.urbansharing.com, which joins the proxy allowlist. The proxy now
sends the Client-Identifier header the operators ask clients to send.
Attributed under NLOD 2.0 in DATA_SOURCES.md and the data credits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Vegvesen camera feed is 2D, so every camera shared one flat 150 m
ground prior and mountain-pass cameras could sit hundreds of metres below
the terrain where neither the point-height prior nor the ground snap
resolves. Each camera now gets its terrain height from Kartverket's
keyless point-height API (CC BY 4.0): ~840 of ~845 cameras.
- 50 points per request, six in flight; points a full batch answers null
for are retried once in batches of 10 (the API drops points from large
batches).
- Sea-floor depths (dybdekurver / Havflate) under bridges and quays
count as the water surface, 0 m.
- Heights are cached by position, so the 15-minute refresh only asks
about new or moved cameras. A catalog load waits at most 12 s; a slower
lookup keeps filling the cache for the next refresh.
- CCTV_VEGVESEN_HEIGHTS=0 turns it off; Kartverket is credited beside
Statens vegvesen in the attribution popover.
Follow-up to #929.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
preserve Bilawal's merge history, OpenAI schema-combinator startup fix, and Contacts viewport note
keep the validated voice and analyst behavior while adopting the current provider-neutral feed routes and Google token fallback
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keeps the voice-core prompt rules and adds main's world-query and
vessels-vs-visuals rules; the tool catalog wraps the deixis-aware runner.
Also fixes two things the branch had before the merge:
- Live voice could not start: OpenAI rejects track_entity's top-level
anyOf. Model-facing tools now omit top-level combinators; the runner
and benchmark still require a query or a referent.
- The Contacts-centred analyst answer dropped the viewport coverage note.
The flight, military and vessel feeds were named after the providers the
bundled server uses (/api/opensky, /api/adsblol/mil, /api/ais-live and
their track routes; createOpenSkySource, createAdsbLolSource,
createAisStreamSource). Any server should be able to answer a feed from
its own provider, so the feeds are now:
/api/flights /api/flights/track?icao24=
/api/military /api/military/track?hex=
/api/vessels /api/vessels/track?mmsi=
with createFlightSource, createMilitarySource and createVesselSource. The
old routes are removed. Each server names its provider in X-Feed-Source
(the bundled server sends OpenSky Network, adsb.lol and AISStream, so its
attribution is unchanged) and the military feed's cache state and age in
X-Feed-Cache and X-Feed-Age-Ms. Sources report the provider the server
names and fall back to the feed's name.
The submarine cable source and the infrastructure data URLs built their
asset URLs from import.meta.url while the module loaded. Importing the
tool services therefore failed in runtimes without a usable module URL,
even for tools that never read those files. Build the URLs when they are
read; Vite still rewrites them in browser builds.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
loadBundledJson's callers passed a literal JSON import as a Node fallback,
which made the production build emit a JavaScript copy of every pack beside
the JSON the browser fetches. The loader now reads file: URLs itself under
Node (through process.getBuiltinModule, synchronously, as promptly as the
cached import it replaces), and the callers pass only the URL. On a Node too
old to provide getBuiltinModule it says that Node 24.14 or newer is needed.
dist/ drops from 54 MB to 42 MB. A test keeps app code from importing a pack
as a module.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Codex serves panels from codex-sandbox:// pages, where origins are
opaque: the panel recognizes the app's own addresses by scheme and host,
the vessels feed resolves against the document address, and the dev
server answers Codex's sandbox origins with CORS.
A panel page loads the app with <base> pointing at the app's server, so
addresses the app builds resolve against the document base instead of
the page location, and hash updates stay on the page's own address.
The dev server answers panel origins with CORS on the API routes too.
Coverage was checked only for packs among the cameras found, so an area
whose cameras were all trimmed away answered zero cameras, complete. The
catalog now reports where each trimmed pack's cameras are, and the tool
marks an answer partial whenever its area overlaps that region.
Camera packs keep their nearest cameras and the catalog cap thins them
further, so London answered 250 cameras while TfL offers many more. The
catalog now records each pack's full count, tags cameras with their pack,
and serves the packs it trimmed; find_cctv_cameras names them.
The installation source keeps one named site per display cell for the map.
Queries now ask for every site and the exact box, and report when the
source returned only part of the mapped sites.
Reworks #568 to the shape asked for in review.
Generalized from "AQHI" to a provider-backed Air quality layer, with ECCC's
AQHI as the first registered provider. Readings are carried as
{ provider, scale, value, band } rather than a bare number, because
air-quality indices are not interchangeable: AQHI runs 1-10+ on health risk,
the US AQI runs 0-500 on concentration breakpoints, and Europe's EAQI is a
five-step category. Naming the index a value belongs to is what lets another
network be added without inventing a shared numeric meaning. Coverage is
stated as "Canada only" on the provider, the layer row and the card.
Adds the WEATHER panel readout (readout: true) carrying the band legend and
the worst readings currently in view, with getRowControls/setRowControlsListener
following the wind and cyclone cards. An unresolvable view rectangle degrades
to the worst readings overall rather than to a blank card, and a rectangle
crossing the antimeridian is handled.
update() now takes the earthquakes layer's abort-and-guard shape: it aborts any
in-flight request, passes the signal through to the source, and refuses to
touch the scene when the request was superseded, aborted, or the layer was
disabled while it was outstanding. disable() and destroy() abort too. Tests
cover the late-response, superseded-refresh and disabled-update paths.
Rebased on main: the source is registered in src/sources/reference.js, and the
allocation profile was re-measured against the current worker — median 3,900
B/frame, max 4,114, 85.7 B/candidate, inside the shared 154 ceiling, budgeted
at 5,200 for 26% headroom. The earlier figures no longer held.
Freshness is now judged on the observation time rather than on when the last
response arrived. lastUpdate only says the feed answered; a station that keeps
returning a reading from four hours ago would otherwise be narrated as live by
the HUD and the voice provenance envelope. getStats() reports observedAt and
stale, so layerFeedState() calls the layer stale past two missed hourly
publications, and degraded when a refresh fails over readings that are still
good.
The share-link token is 0, which is what layer-token:next allocates. Taking it
moves the ledger fixtures that had hard-coded 0 as the free digit and 3 as the
one after; those shift to 3 and 4. The pinned equality between the reservation
ledger and LEGACY_LAYER_STATE_TOKENS also had to become "the closed legacy set
plus air-quality", since that set is documented as never growing. Happy to
re-pin this differently if you would rather the fixtures derive the provisional
digits from nextLayerStateToken() so the next layer does not move them again.
The layer and its source are registered as ./layers/air-quality and
./layers/air-quality/source, each with its own boundary group, following the
perimeters pair. check:boundaries requires the package exports and the group
exports to be the same set, so a layer that ships a source needs both.
keep contacts counts, rows, scope and provenance on one retained snapshot
report capped cohorts as lower bounds
separate sibling tool cancellation from newer user turns
align track_entity validation across runtime and benchmark paths
The datacenter and dam layers parsed their bundled GeoJSON Lines and
built analyst records inside the Cesium-backed layer module. Move the
data URLs, the line parser, mapAnalystRecord and layerTitle unchanged to
src/sources/infrastructureData.js; the layer module imports them and
still exports mapAnalystRecord. The consumer-build pin lists the new
module.
Sameh Khamis