Takes main's per-point mesh floor readings (#1642) onto the seam's
port-based sampler: a spot refused only while the cell's DEM prior was
cold is probed again, each spot is recorded once, a cell keeps at most
sixteen readings, and grounded flights read the floor at the contact
held inside its sticky cell.
Brings in radio country coverage (#1206), the restored format scope
(#1527), the zoom-out guard (#1522), voice geometry and OSM places (#846)
and paired traffic flow density (#1495).
What main added that reached Cesium or the viewer now goes through the
renderer:
- The zoom-out guard reads the Cesium camera controller's own input, so
it moves into the adapter (src/render/cesium/zoomOutGuard.js). The
application installs it through the scene's viewer hooks, and a scene
whose renderer gives no guard starts without one.
- OSM places draws its points as a draw set, clamped to the ground.
- The voice area actions read the view box and the view centre from the
camera port.
- The voice workflow harness is test support, named as such where the
recent-imagery doubles are.
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.
Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.
The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.
Keeping a cell's lowest reading let a street probe pull a vehicle on a viaduct
or bridge in the same cell down to street level. Readings now stay at the point
they were taken (up to eight per cell, about 17 m apart), a read answers from
the reading nearest the vehicle, and two readings within about 5 m keep the
lower.
The rendered-mesh floor took one probe at each coarse cell's centre and kept it
for the session. A centre on a roof passed the +80 m DEM window and lifted every
vehicle in the cell to roof height (a Haymarket bus drew 23.5 m above the
street); a centre in the river put Red Line trains on the Longfellow Bridge
6-9 m under the deck. The sampler now probes at the caller's point, reads a
latched cell again at up to four points apart from each other, and the gate
keeps the lowest reading that passes.
The camera icons are now a draw-port icon set kept by an icon book; only
icons a view pass or restyle changes are written, in one write per pass.
Picks read the renderer's hit, the view pass and focus pass project
through the camera pose (geo/frustum.js poseProjector, matching the
renderer's projection and near clip) and the query port, and tile
readiness for ground sampling comes from the globe port.
The flights and military layers now reach the renderer only through its
ports: motion, queries, state, tracking, enrichment, evidence and policy
read the camera pose, project through the query port, request and
suspend frames through the frame port, and key per-frame caches on the
frames drawn rather than the scene's frame number. Policy is plain data,
the enrichment view test is pose-based, and the tracked aircraft is an
icon in a draw-port set with a plain holder standing in for the entity
that Cockpit, the tracked card and share links read.
The mesh floor sampler can sample through the query port, excluding
named draw sets, and both layers use it that way. A pick of another
layer's tracked icon is never taken for one of a layer's own contacts.
Twelve layer files leave the Cesium allow-list.
Cockpit now places its eye with the geo maths and moves the camera
through the camera port on the frame port's preUpdate, so cockpitCamera.js
and cockpitController.js no longer load Cesium and leave the allow-list.
Whether the aircraft still draws comes from a trackedEntityDrawn service,
which the application shell answers from the viewer's entities. The mesh
floor probe accepts the viewer as well as its scene.
Local ADS-B's 3D aircraft are now one models set of the renderer's draw
port, re-posed in place each frame, instead of Cesium models of their own.
Ground placement samples heights through the query port and sees through
the layer's sets by id; clicks read the dispatcher's draw-set hit and the
query port's drill. A class change keeps the drawn model, at its own belly
offset, until the new asset is ready; a scale-only change applies at once.
The models file leaves the Cesium allow-list.
Cesium model sets retry a failed load when its item is next updated after
a short wait, and parse an item's tint only when it changes.
The camera ground guard, place and landmark flights and imported-file
flights read terrain and surface heights through heightsOf, the one place
the app's height queries go, rather than asking the query port themselves.
With the annotation resolver off the allow-list, ground snapping, which
the application operations entry also reaches and which stays listed,
loads the Cesium camera factory for a viewer with no renderer bound.
The height docs say what the Cesium renderer answers without depth
textures: no surface or tiles height, and terrain from the loaded tiles.
The Cesium scene's height service moves into the Cesium adapter
(src/render/cesium/heights.js), where the Cesium query port answers its
height members through it; the files still bound to the Cesium scene
import it from there.
src/queries/heights.js becomes the height gateway over the renderer's
query port: heightsOf(viewer) answers now, clampNow, batch, clampBatch and
supported as before, a miss is null, a failed or destroyed query rejects,
and exclusions are draw set ids. The source scan that keeps height queries
in one place still holds: outside the renderer, only the gateway asks for
streamed heights. The bikeshare layer samples its station heights through
it.
Heights leaves the allow-list.
About 20 sites called scene.sampleHeight, globe.getHeight,
scene.clampToHeight or the MostDetailed variants directly, each with its own
idea of a miss (undefined, NaN, a throw). They now ask heightsFor(scene) in
src/queries/heights.js:
- now(point, { against, exclude }) answers from what is loaded, or null;
against is 'surface' (what is drawn) or 'terrain' (loaded terrain only).
- clampNow(position) moves a position onto the drawn surface, or null.
- batch() and clampBatch() wait for the most detailed tiles: null per
missed point, a rejection when the whole query fails.
- supported() reports { surface, clamp } without allocating.
Cesium still answers now() synchronously, so nothing changes on screen and
nothing is slower: in the live app 1,000 calls cost the same through the
service as direct (terrain 0.5-0.7 ms, surface 2-6 ms a call, run-to-run
noise larger than the difference). Every site already treated a miss as
"hold the last value or fall back"; a renderer that can only answer from a
cache or asynchronously can now plug in at one place.
- A Bhote Koshi evidence point whose terrain sample misses stays at its
fallback elevation instead of reading the miss as sea level.
- The mesh floor sampler skips a scene without depth-texture support
instead of spending its budget on probes that throw.
- The world annotation probe's trace reads hit/missed.
- A source scan forbids direct height calls outside the service.
The service is exported as ./queries/heights and documented in
docs/APPLICATION.md.
Both stack parents (#837, #842) are on main, so the voice geometry branch
now builds on main directly. Conflict resolutions keep main's behaviour and
add the geometry work on top: osm_query gating on every provider, restored
admin identity for Nominatim outlines, merged analyst follow-up memory, and
the cancelled Globe View reset instruction ahead of the generic cancellation.
The HUD builds place context for its AI summary whenever the camera
settles, and each build paid for up to four reverse geocodes plus a Nearby
Places search, even when no OpenAI key was configured to use them.
- Ask GET /api/openai/hud-summary/status once; with no summary configured,
or after an unconfigured reply, make no place lookups for the page.
- Reverse-geocode at most two points: the view center and one viewport
point.
- Reuse a lookup until the view center moves a quarter of the visible
width, the camera's distance to it doubles or halves, or the camera
crosses a lookup height. The reused points are asked again, so only a
timeout, failure or empty answer spends.
- Repaint the last AI reply when a small pan leaves the context unchanged.
Cached-only hosts and voice context lookups are unchanged.
A request with any point the proxy cannot answer gets 502, and the page
used to put every point of that chunk on its geoid, including the ones the
proxy had real (cached or stale) heights for. During an upstream 429 pause
that drops cached ground under every chunk that also holds a new point.
The 502 body now carries `partial`: the request's real heights in order,
null for points without one, left out when there are none. The terrain
request service attaches it to the error it throws, and the page caches
those heights and uses its geoid only for the rest. `get_terrain_height`
still reports the failure as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Main gained three imagery providers (Google Street View, KartaView,
Panoramax), shared line-coverage, cone and photo-viewer modules, one source
lit at a time and the translated interface. Their shared modules still
carried what this branch removes, so the merge ports them onto it:
- lineCoverage.js is this branch's coverage.js made provider-neutral
(draped lines near the ground only, the selection drawn over them, key
and rate-limit blocking); sequenceCones.js is sequences.js the same way.
Mapillary, KartaView and Panoramax all build on them; Mapillary moves
back to providers/mapillary/ beside the others.
- No ground casting, mesh sampling, surface modes, FOLLOW, legend, prewarm,
orbit overview points (Panoramax's density dots included), stale-tile
swaps or water-filled point budget come back.
- Kept from main because the new providers need them: requiresMapStack and
attachMapStackController (Street View on Google 3D only), ground clicks,
openNearest with an optional provider nearestImage, openImage {frame},
reportError, the view-cone marker (now an SVG glyph), filters /
coverageLabel / sinceBasis, OPEN STREET VIEW, keyAlternatives and i18n.
- photoViewer.js treats the viewer as expanded when its wrap is full screen
or the iPhone popover, as EXPAND now is.
- The fixture browser gate keeps its 8 steps and adds one each for
KartaView and Panoramax; catalogs, docs, boundaries and format scope
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The flights records and the mesh-floor sampler kept identical copies of the equirectangular distance; both now import src/data/approxDistance.js. The changelog entry moves to changelog.d (#787), and CURRENT-STATE notes the antimeridian behaviour.
The flights ground-floor pipeline subtracted longitudes without wrapping.
approxDistanceKm, and its copy in the mesh-floor sampler, measured two
points 0.2° apart either side of 180° (21 km at Fiji) as about 38,000 km,
so low and grounded aircraft just across the line from the viewer were
never floored or mesh-sampled. corridorFloorCells walked a segment across
180° the long way round, filling its cell budget with ground behind the
contact and never requesting the cells it was about to cross, and
stickyFloorCell dropped its hysteresis for a contact on the seam. Each now
takes the short way round, and corridor points are normalised back into
[-180, 180].
SEARCH NEARBY SITES centred its Google Places search on the mean of west
and east, which for a view across 180° (west > east) is longitude 0, and
sized the radius from the view's height alone. It now measures the view's
width through 180° and searches its real centre.
A warm entry could be evicted by the same call's later fetches and then
reported unresolved. The call now remembers warm hits as it does fetched ones.
Moves the batch LRU test beside the existing cache tests and folds the docs
note into the section's eviction paragraph.
FOLLOW is gone: no setFollow, follow state, map-stack availability or
handoff listener. Opening a photo still frames it with one flight through
the application's deferred navigation (begin/reassert), so a slow photo
never overrides newer navigation and tracking is released as before.
Ground casting is gone: groundCast.js, meshSampler.js, the surface mode,
the draped-to-cast swap and remesh. Coverage lines are always draped
GroundPolylinePrimitives (ClassificationType.BOTH); cones and the marker
clamp to the ground and keep the horizon cull. The terrain/meshFloor/ground
services and meshFloor.visibleTilesetLoaded are no longer needed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Photo framing and FOLLOW claim the camera through the application's
navigation, injected with attachNavigation({ run, subscribeHandoff }):
aircraft and satellite tracking is released first, the cockpit refuses,
and FOLLOW stops when another feature takes the camera. No UI imports
in the layer.
- The mesh sampler follows the mesh floor's rules: it waits for the
visible tileset to finish streaming (visibleTilesetLoaded, now exposed
by the mesh floor service), needs a real bare-earth prior and keeps to
the shared meshFloorSampleWithinPrior window, which cameraFollow now
uses too. A cell is probed again once the camera is half as far from
it (down to 40 m), so a coarse early sample is replaced and redrawn.
- The MCP globe panel's CSP allows the Mapillary Graph API and its image
CDN (https://*.xx.fbcdn.net).
- The tile proxy reads bodies with the shared readResponseBytesCapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- turn named places and mapped landmarks into reusable bounded areas
- count loaded records inside resolved, drawn and annotated geometry
- find recent imagery for an area, the view or the pointer snapshot
- keep osm place search behind an operator-configured overpass endpoint
- preserve cancellation, ownership and follow-up memory across every action
- cover geometry, provider lifecycle, cache isolation and voice routing
Traffic roads come from OpenFreeMap vector tiles, or TomTom flow tiles with a
key (Hybrid by default). Military areas use OpenFreeMap polygons with a bundled
worldwide name index; wide views show named points. ALPR reads an hourly
OpenStreetMap extract. Cockpit place context and country, state and US county
outlines use bundled Natural Earth and US Census data. Overpass is used only
when an operator configures their own endpoint.
Also: camera arrivals no longer land below ground, keyless terrain retries on
429, bounded relation geometry for configured Overpass, one shared
OpenStreetMap credit, and separate tile and API transports for embedders.
Co-authored-by: theGaryLarson <[email protected]>
Co-authored-by: Milan Khanal <[email protected]>
The in-memory cache in the terrain-height resolver had no eviction, so a
session retained every coordinate it ever resolved for the lifetime of the
page. The 5-decimal rounding documented in the file header makes repeated
visits to one place share a key, but it does not bound how many distinct
places a session visits.
Cap it at 20 000 entries, overridable per instance so the bound is testable
without minting twenty thousand coordinates. Eviction is least-recently-used
rather than insertion-ordered because revisits here are spatial: the cell the
camera is parked on must not be dropped for having been resolved early.
The bound sits far above a city-scale session at the ~111 m floor grid, so
normal use never evicts and issues no additional proxy requests. Batch results
are assembled from what the call resolved, so eviction during a large batch
cannot report a just-resolved point as unresolved.