Commit Graph
3769 Commits
Author SHA1 Message Date
Sameh Khamis 09520bc34c Changelog fragment for #1642 2026-11-09 14:54:51 -08:00
Sameh Khamis 9bce41d3c6 Read the mesh floor where transit vehicles and grounded flights actually are
With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).

The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
2026-11-09 14:51:35 -08:00
Sameh Khamis 04b8c856ad Keep vehicles off rooftops and bridge decks: probe the mesh where the vehicle is
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.

The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
2026-11-09 14:51:35 -08:00
Sameh Khamis c073064507 Stack sprite layers by draw order, flights on top
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.

The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
2026-11-09 14:32:50 -08:00
Sameh Khamis 657ef94f77 Merge branch 'sameh/renderer-exit' into sameh/renderer-seam 2026-11-09 13:17:24 -08:00
Sameh Khamis 4c587a6d0f Application scene and conformance page leave the Cesium allow-list
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
2026-11-09 12:58:45 -08:00
Sameh Khamis 26665e8390 Embed views and the application shell leave the Cesium allow-list
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
2026-11-09 12:43:36 -08:00
Sameh Khamis e6d9ec0636 Starry sky and the application viewer move into the Cesium adapter
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
2026-11-09 12:31:46 -08:00
Sameh Khamis a8a9cc73a4 Map stacks off the Cesium allow-list: providers move into the Cesium adapter
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.

src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
2026-11-09 12:11:42 -08:00
Sameh Khamis aea5c3acc6 Merge branch 'sameh/renderer-annotations' into sameh/renderer-seam 2026-11-09 11:35:31 -08:00
Sameh Khamis 5337b68dab Admin outline QA checks the annotation primitives the draw port builds
The world annotation renderer no longer draws entities, so the checks
read the mark's primitives in the scene instead: draped fills and
outlines, built, and unchanged while the camera is still. The last
outlines are checked by picking the mark at the middle of the view.
How long the primitives take to build is reported beside the first
drawn frame.
2026-11-09 11:34:18 -08:00
Mazeyar Moeini Feizabadi e5da073d33 Merge pull request #1638 from avaldini/fix/realtime-voice-unicode-patterns
fix(voice): send OpenAI Realtime tool schemas the API accepts
2026-11-09 20:32:38 +01:00
Mazeyar Moeini Feizabadi ddd07f13f0 Merge branch 'main' into fix/realtime-voice-unicode-patterns 2026-11-09 19:44:29 +01:00
Sameh Khamis d9e72dfc8b World annotation renderer draws through the renderer's ports
Areas, buildings, routes, arrows, pins and labels are draw-port shapes,
lines and points, one set per mark, faded by upserting their colours.
Pins pulse their ring and size it by camera height; arrows drape.
Ground heights come from the heights service. The module leaves the
Cesium allow-list.
2026-11-09 10:34:53 -08:00
Sameh Khamis 6b4b04d082 Cesium draw port builds colour fills with the vertex format their appearance reads
Unclamped colour fills are built with position and normal only, as the
entities' colour batches build them; image fills keep texture coordinates.
With the default format Cesium packed texture coordinates with the normals
and the colour appearance decoded the packed value as the normal, so lit
colour fills (an extruded column, a box) shaded darker than the same
entity.
2026-11-09 10:27:20 -08:00
Sameh Khamis 2c68fc0248 Conformance: the atlas check makes its canvas slot only where a 2D context exists, not wherever there is a document 2026-11-09 10:21:48 -08:00
Sameh Khamis 16c8936d70 Follow framing has one implementation: followViewFrom reads the camera port and calls followOffsetFitting 2026-11-09 10:10:54 -08:00
German Khokhlov 10784fa9c9 Merge pull request #1552 from IMBrandao/fix/firms-drop-snpp
fix(firms): stop requesting the retired Suomi NPP source
2026-11-09 21:52:09 +04:00
Sameh Khamis c148e2888f Cesium draw port pulses shape alpha and recolours shapes in place
Shapes take an alpha pulse (from, to, periodMs, forever), run before each
frame, with frames asked for while anything drawn pulses. Any other pulse,
or one on a fill that is not a colour, is refused before anything changes.
An upsert that changes only colours, pulse, show or meta is written into
the drawn primitives: unclamped shapes through their instance colours and
ring materials, clamped colour fills through their ground primitive (or
once it is ready). Shapes not yet drawn, or drawn opaque and turning
translucent, rebuild as before.
2026-11-09 09:50:30 -08:00
German Khokhlov fce5ee6381 docs(firms): tighten the Suomi NPP notes 2026-11-09 21:44:09 +04:00
German Khokhlov d90da158ea Merge branch 'main' into fix/firms-drop-snpp
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-09 21:41:01 +04:00
German Khokhlov b04fcf191c docs(firms): count two VIIRS sources in the layer table and test note 2026-11-09 21:38:07 +04:00
Sameh Khamis 1d813a8055 Cesium draw port drapes arrows, draws ellipse radii by camera height and classifies volumes
Draped lines take the arrow style. Clamped ellipses with radii by camera
height are drawn at the camera's height each frame, drawn alone up to
MOVING_SHAPES (counting those a retiring host still draws alone) and
rebuilt past that. Extruded shapes that classify their volume draw as a
ClassificationPrimitive where the scene supports it, and extruded
polygons draw their outline cage. The stub picks clamped rectangles,
ellipses and classifying volumes, outside their holes. Conformance
checks radii by camera height and classifying volumes on both renderers.
2026-11-09 09:23:04 -08:00
Sameh Khamis 561cd8f1cf Merge branch 'sameh/renderer-fields' into sameh/renderer-seam 2026-11-09 08:40:09 -08:00
German Khokhlov 581ef7eef4 Merge pull request #766 from BreezeDelegate/fix/node26-allocation-gates
fix(ci): run allocation gates on Node 26
2026-11-09 20:35:28 +04:00
German Khokhlov 015e3ff7fc Merge branch 'main' into fix/node26-allocation-gates 2026-11-09 20:19:29 +04:00
Sameh Khamis 2a26d13fff render: wind relief is the globe port's hillshade; the wind layer no longer reaches Cesium
The wind relief now asks the globe port for hillshade surface shading at
0.28 instead of building a globe material itself; the Cesium globe port
draws the same view-directed shading, over terrain normals or the globe's
curvature, and the unbound provider now lists surfaceShading. The wind
layer's canvas flow, bounds, imagery fade and render requests go through
the camera, frame and query ports, so src/layers/wind/rendering.js and
relief.js leave the Cesium allow list.

A refused shading request is taken back so it never shows after Wind is
off, and a camera height that is not a number falls back as before.

The application layers and standalone catalog entries no longer load the
unbound factories themselves: a viewer with no renderer bound
needs render/cesium/unbound loaded first. The contract and current-state
docs say what the Cesium adapter's fields and surface shading do now.
2026-11-09 08:13:04 -08:00
German Khokhlov 72a240ba6f Merge pull request #762 from monwiss/refactor/tile-budget
refactor(providers): move the tile budget helpers out of the TomTom module
2026-11-09 20:00:55 +04:00
German Khokhlov 77df600329 Merge branch 'main' into refactor/tile-budget 2026-11-09 19:52:40 +04:00
Said Turksever 0dbc657bf9 Merge pull request #1576 from bilawalsidhu/german/transit-bikeshare-empty-state
Say why Transit and Bike Share rows are empty outside coverage
2026-11-09 15:48:34 +00:00
German Khokhlov e22348a8e1 Merge branch 'main' into refactor/tile-budget 2026-11-09 19:43:58 +04:00
German Khokhlov 75e8e7ddbd refactor(data): describe tile budgets per period, drop a duplicate test, add the changelog entry 2026-11-09 19:41:51 +04:00
Sameh Khamis fcd1c09565 render: Cesium draws wind-streamline fields; the wind layer's flow uses the draw port
The Cesium draw port now implements draw.field for the windStreamlines
kind (src/render/cesium/drawStreamlines.js). It carries the flow shader,
the 30-degree cells, horizon and frustum culling and the path tracing over
from the wind layer. It moves the highlight on the page's own frames, at
most every 32 ms, and only while the field shows, is unpaused, has alpha
and some cell is in view on a visible page. A grid no path runs through,
or one short of the whole globe, is refused. A rebuild that fails draws
nothing and is never told drawn.

The wind layer's GPU flow (src/layers/wind/gpuRendering.js) now builds the
spec, fades it by camera height and pauses it through the draw, camera and
frame ports, and no longer reaches Cesium, so it leaves the Cesium allow
list. The layer runs no animation loop of its own while the renderer draws
the flow; the canvas fallback is unchanged and still takes over wherever
the field is refused. A new conformance check covers the field's 'drawn'
events.
2026-11-09 07:38:06 -08:00
Said Turksever 9787d9c4cc Merge branch 'main' into german/transit-bikeshare-empty-state 2026-11-09 15:32:48 +00:00
Said Turksever 2725f307a6 Merge pull request #1628 from IMBrandao/feat/transit-more-cities
feat(transit): add 34 keyless cities across Europe, Asia, Oceania and North America
2026-11-09 15:30:57 +00:00
Said Turksever cf05a29b7f Merge branch 'main' into feat/transit-more-cities 2026-11-09 15:20:12 +00:00
German Khokhlov 45108a0b0b Merge pull request #794 from daikaginza/fix/api-method-guard
fix(server): declare the method contract on the three read-only query proxies
2026-11-09 19:17:49 +04:00
Sameh Khamis 0600d86584 docs(changelog): Draw hands one shape back (#1641) 2026-11-09 07:16:52 -08:00
Sameh Khamis 4da477a654 feat(draw): hand one drawn area or line back to the application
createApplicationTools returns drawShape({ shape, signal }): it opens Draw
for one area or line and resolves with its Polygon or LineString without
placing a mark, or null when draw mode is left, the signal aborts, a newer
request replaces it, the pointer is held elsewhere or the tool goes. The
shape controls cannot change the asked-for shape, and a shape across the
antimeridian is refused as a row's actions refuse it and drawn again. It
also returns pointerFree, so an application's own click handlers yield to a
tool holding the pointer, as the layers' do.
2026-11-09 07:16:14 -08:00
Said Turksever c1ca0f489c Merge branch 'main' into feat/transit-more-cities 2026-11-09 15:13:18 +00:00
German Khokhlov cdf52ab290 test(server): drop unused fields from the /track hand-off stub 2026-11-09 19:07:14 +04:00
German Khokhlov c3738c0fdb docs(server): tighten the method-guard comments and changelog 2026-11-09 19:07:14 +04:00
Sameh Khamis 50cb7bd5f4 render: Cesium draws raster-shell fields; weather shells use the draw port
The Cesium draw port now implements draw.field for the rasterShell kind
and advertises the 'fields' capability. The shell surface (a raised
rectangle with a detail window, drawn in primitive order without depth
writes) moves from the weather layer into src/render/cesium/drawFields.js.
A new rectangle or height is drawn invisibly first and swapped in whole,
and 'drawn' is told in the frame of the swap. A stage of older content
never replaces the drawn one while newer content decodes. A field hidden
mid-stage keeps building it.

The weather shell (src/layers/weather/shellRendering.js) now drives one
field through the draw, camera, frame and globe ports and no longer
imports Cesium, so it leaves the Cesium allow list. The wind shell on
photoreal hosts also draws through draw.field. The conformance page runs
each visual scene on its own, so a kind the Cesium renderer does not draw
yet (scalarRaster) fails only its own scene.
2026-11-09 07:02:54 -08:00
German Khokhlov ace88172d3 Merge branch 'main' into fix/api-method-guard 2026-11-09 18:51:02 +04:00
German Khokhlov 6a7a09372a Merge pull request #795 from daikaginza/feat/opensky-compress-cached-body
feat(server): compress the cached OpenSky snapshot for clients that accept gzip
2026-11-09 18:40:19 +04:00
Said Turksever 3e630cf34f fix(transit): mark route line names as kept for i18n
Métro, Calypso, LD and the metro letters are line names as signed, not UI
copy; the i18n catalog check flagged them.
2026-11-09 14:34:33 +00:00
German Khokhlov 9d7fe8fcaa Merge branch 'main' into feat/opensky-compress-cached-body 2026-11-09 18:30:32 +04:00
German Khokhlov a45d6af5f7 Merge pull request #1611 from abiyeenzo/fr-fixes
i18n(fr): typography, terminology and wording fixes
2026-11-09 18:22:18 +04:00
German Khokhlov caad795fa2 refactor(server): drop the null and String paths from gzipBody 2026-11-09 18:15:13 +04:00
German Khokhlov 09bf01630b docs(server): tighten compression comments and docs 2026-11-09 18:14:30 +04:00