- The route globe, turning model and cockpit view are the renderer's: the
Cesium plugin hands them over as its `cardPreviews` application hook
(src/render/cesium/cardPreviews.js), and the card's tiles keep only the
words, figures and HUD laid over them. Nothing in the UI reaches Cesium,
and a renderer without the hook leaves the card its photo and figures.
- The turning model is the fleet model the globe draws for the aircraft's
type, from the set loaded at startup, so opening a card fetches nothing.
The flights layer's record now carries the type code and emitter category
that pick it.
- The photo comes from the item's own layer: the flights layer's
Planespotters photo for the plane it tracks, and the vessels layer's Open
Vessel Photos photo for the vessel selected, with its credit. It no longer
waits for Contacts to follow the same aircraft.
- The satellite models are left out: the card shows a satellite's ground
view and graphs its altitude and speed.
- The route globe's airport codes are drawn into its own small scene, the
compass reads its course in the active language, the callouts no longer
speak to screen readers every six seconds, and figures use the app's
number format. Esri's tile address and credit live in one place.
Co-authored-by: Manjunath Paparaju <[email protected]>
Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
- Clicks: when two tools want the globe's clicks, the newest takes them and the older is told and turns itself off; a click is decided when it arrives, and ambient selection fires only when no tool holds the pointer. The "map is busy" paths and their strings are removed.
- Recession: the limb fade is shared (src/render/recession.js) and reaches icon and model sets through SetSpec.recede; tuning applies on the next frame.
- Display panel groups are published through src/ui/displayGroups.js; the Weather group and src/viewWeather.js are removed.
- Draw port: a set whose icons only move is moved in place, and models that did not change are not restyled each frame, so moving fleets cost what they did when drawn directly; an untinted, fully opaque model is drawn without a colour.
- Conformance: input.lease.lost checks the new lease inside onLost and reports a throwing onLost; draw.sets.recede covers model sets.
- QA scripts read the renderer host instead of internals the seam replaced.
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.
Under the seam:
- The render failure notice lives in the Cesium adapter
(src/render/cesium/renderFailure.js) and is the application hook
renderFailureNotice({allowReload, store}); its private Cesium fields
(Event's raise queue, the widget's render loop flag) are read through
internals.js. The inline panel's timer waits while the frame port reports
the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
the draw port; the fleet model test fakes answer loads through the fake
draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
camera port.
Before, the route was one clamped polyline whose material coloured it
ahead of the train and dimmer behind it, split exactly where the train is,
with a dark rim at its edges. Through the draw port it became per-segment
colours chosen by each segment's midpoint (the split jumped from vertex to
vertex) and lost its rim.
The contract gains a draped line style `split`: `color` from `at` (a
fraction of its length) on, `behind` before it (`reverse`: the other way),
and an optional `rim` (the outer `widthFraction` of its width at `shade` of
each colour). `at`, `reverse` and the colours change in place. The Cesium
renderer draws it with one material; the rail route uses it, measuring its
split in metres on the ground (one per vertex where the scene draws over
the surface). New conformance check draw.lines.split.
The two slots share one small request budget through one admit hook.
When one slot held it, the other's deferred tiles asked the Cesium globe
for a redraw every 250 ms, about four extra frames a second while tiles
loaded; before, they waited for the holder's tile, whose settling draws
the frame that asks again. Layers given the same admit now share their
waits: with one of their tiles in flight, nothing more is asked for. A
layer deferring while an unrelated layer loads still retries after 250 ms.
The two dense entries (cadastre from z14, sea depths from z11) were drawn
by Cesium only on globe tiles as fine as their minimum zoom, with their
minimum zoom tiles filling the coarsest of those. Through the globe port
they dropped the minimum level and refused every tile below it, so the
far band of a tilted view, one globe level coarser, was blank.
The imagery contract gains hiddenBelowMinLevel: a layer drawn nowhere the
surface is coarser than its minLevel. Cesium gives such a layer
minimumTerrainLevel as the library set it before (minLevel - 1 for Web
Mercator tiles on the geographic globe); the entries keep their minimum
level and drop the admit hook.
The contract gains offsetScalesByDistance: the pixel offset grows and
shrinks with scaleByDistance, as Cesium's pixelOffsetScaleByDistance does
with the same curve. rotationMode 'axis' now also turns by rotation, as a
Cesium billboard with an aligned axis and a rotation does. Cesium draws
both on its billboards; its GPU icons take the rotation and refuse a
scaled offset; the stub picks both. New conformance check
draw.icons.offsetTurn.
Cesium's fov was saved and put back when the orbital view closed, so a
later resize or rotation kept Cesium's own behaviour. The exit held the
saved vertical angle through setFov instead, which the camera port kept
for the rest of the session: rotated to portrait, the view stayed
zoomed in. setFov(null) gives the field of view back: Cesium's fov as it
was before the first hold, the stub's own angle.
When a host stops animation frames, the panel drew from a timer with the
viewer's render(): the camera's flight and input, the clock's tick, then a
draw if due. Through the frame port it called renderNow(), which on Cesium
only forced a draw, so flights stood still, drags and zooms did nothing
and the clock stopped. renderNow takes {ifDue: true}: one tick of the
loop as its own would run it, drawing only a frame that is due (the
widget's render() on Cesium; the stub's tick without a forced request).
The pan used Cesium's QUADRATIC_OUT; through the camera port it took
cubicOut, the contract's nearest ease. The contract gains quadraticOut,
which Cesium maps to QUADRATIC_OUT and the stub camera computes.
Cesium raised moveEnd 500 ms after the camera last moved, following or
not: a followed target that moves keeps the eye moving, and one that
stands still (a marker, a parked aircraft) lets the move end once
the user stops orbiting it. The port never raised moveEnd while
following, so Weather, Recent Imagery, the share link and every other
moveEnd listener stopped catching up around a still target. The rule is
now the eye's alone, through the shared camera events.
With atmosphere, fog and lighting off and clear weather a renderer applies
none of its look, so draw.models.tint, draw.models.blend, globe.base.vector
and globe.imagery.video set that sky first and test what they draw, not a
renderer's sky light or tone mapping.
globe.sky switches parts of the sky on and off; how the sky, atmosphere,
haze, lighting, tone mapping and exposure look is the renderer's own, and
no check compares colours. globe.weather's clouds is the fraction of the
sky covered; clouds are placed by scene time and the wind and shade the
ground under them where the sun lights it. New conformance check
globe.weather.sceneTime.
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.
Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
A vector setBase awaited its style before changing anything, with no
generation guard, so a slow earlier call landed over a later one, and one
in flight at disposal rejected. Cesium and the stub now count calls like
setPhotoreal and setTerrain, abort the overtaken style load, and resolve
an overtaken call with imagery: [] and settled: false.
Each frame drawn, a set's host turns the draw commands it gave to the set's
blend before the scene sorts them: opaque draws every command in the
opaque pass unblended with depth writes; translucent alpha-blends every
command without depth writes; additive adds colour times alpha without
depth writes, still depth-tested, after the opaque commands and before the
order-independent translucent pass. Ground commands only blend
differently. Lines, shapes, models, quads, meshes and GPU icons take every
blend, live through setOptions (models do not load again); GPU icons no
longer refuse opaque or additive. The contract documents the semantics and
the checks draw.sets.blend and draw.models.blend read the pixels. The
package boundaries own setBlend.js and screenCluster.js.
Clustered icon sets cluster with clusterScreenPoints over the shown icons
each frame drawn after the camera moves or the set changes. A cluster draws
one icon (icon(count), else a count badge) at its members' mean in place of
the members; a pick on it answers each member, seed first, at the cluster's
position. GPU icon sets refuse clustering. The stub clusters the same way,
the contract documents the semantics, and the check draw.icons.cluster
covers it.
imageryLayer.lit (a layer shaded by the sun) joins the look with surface
shading. roleOf answers undefined for a member its port does not have, and
the port's own role without a member. The test now fails when two roles
claim the same entry.
ROLES sorts every member of PORTS into one of six roles: the Earth (streaming
and building the globe from map sources), scene contents, camera and input,
world queries, the look, and the host and frame loop. The ports follow the
API's shape; the roles say what the engine behind them does, and that the app
keeps the data while the renderer owns everything from a source spec or a
draw set down to the pixels. roleOf resolves a member to its role, the most
specific entry winning. No member changes; a test keeps every member in
exactly one role and every entry naming a real member.
The contract's TerrainSpec gains quantizedMesh terrain: Cesium's tile
format in the folder at its url, heights above the ellipsoid. Without an
ion key the globe-port map engine asks for Re:Earth's keyless terrain as
it, where it asked for the ellipsoid, so the renderer
draws the same ground; without the terrain capability keeps the
ellipsoid. Cesium's globe port draws it through CesiumTerrainProvider with
the keyless terrain's retry policy.
A renderer plugin may supply applicationHooks(renderer) for what only its
renderer has (map engine, own credits, stale commands, QA handles). What every
renderer should do moves onto the contract: controls.keepEarthFramed (behind
the keepEarthFramed capability), query.occlusionTest (behind occlusionTest),
and panel drawing, which keepPanelRendering now does through resize and
frame.renderNow through the contract. renderNow throws when the frame fails to draw.
The Cesium port installs its zoom-out guard through keepEarthFramed (a setView
no longer cancels its turn) and answers occlusionTest with the scene's probe;
the stub answers it with a horizon test.
- Every placement of Cesium's credit display (above the command dock, the
Minimal HUD's corner, clean view and recording, the phone tab bar and an
open sheet) has the same rule for the application's line; a test keeps
each stylesheet's pairs together.
- A credit's logo is drawn in place of its text, which names it (the
image's alt), as Cesium shows logo credits; the contract's Credit says
so. Links open with noopener and noreferrer; a list that empties while
focus is in it hands focus back to the line.
- A stack that stays after any failed switch (a tileset or imagery that
fails to load, or a photoreal base that fails to come back) still falls
back on its tile failures: the controller binds its listener again for
that switch where it handles the failure.
A solid line's outline.widthPx is the outline in all, half on each side and
inside the line's width, as Cesium draws it. The range ring's pulse fronts
pass their halo width whole again, so they keep main's look, and the
conformance check draw.lines.outline pins the width. The lines scene's
outlined line keeps its 2 px edge each side and its references are
re-recorded.
The ring, its sonar fronts and the band behind them leave Cesium: the
ring and each front are one solid line with an outline, the band is one
flat unpickable ellipse at the rim filled with a canvas painted from the
pulse radii. rangeRingCesium.js goes, and the Cesium allow-list is empty.
Solid lines take an optional outline ({color, widthPx}, inside the
line's width on each side), drawn in the line's own pass so a
translucent halo never darkens where it meets the core; both colours
change in place, and outlined lines never settle into the static batch.
An unclamped image fill takes a new canvas in place: copied into its
texture when the size is the same.
A parked view steps the pulses from the 80 ms timer before it asks for
the frame that draws them, so it draws one frame a step; frames the
camera moves in, or held drawing, step them every frame, and the band is
painted at most every 80 ms. The lines reference scene gains an outlined
line.
Shapes take their radii in metres; the world annotation ring follows the
camera height itself (ringRadiusAt), resizing on preRender. The radial rim
preset and depthBias go: the launch pad zone draws a canvas image fill made
by the layer. Solid and dashed lines take one depthFail look (solid or
dash) in place of depthFailColor and depthFailDash. sonarCadenceHz goes from
the quality settings: nothing set it, and the sweep moves every 80 ms.
Camera move, look, rotateAround and zoom leave the camera port: the app's pans,
in-place turns, globe turns and zooms are setView views summed over the pose
(geo/eyeMoves), and the Cesium port places a view by direction and up
exactly rather than through heading, pitch and roll. The conformance driver
runs those script steps through setView; the lookAt script turns in place
where it turned about the frame-local axis, and its reference is recorded
again.
Quality no longer switches clouds or water (their ports are gone) and its
atmosphere and post-processing settings are low or high detail; whether the
sky or a pass shows stays with globe.sky and effects. The separate
input.ctrlWheelZoom switch is gone: 'ctrlWheel' in the camera's zoomInputs
also relays trackpad pinches, which the application turns on.
Drops from the contract, the stub, the Cesium renderer and the
conformance suite: agent paths, renderer-propagated orbits and celestial
draws (orbits stay drawn as icons and inertial lines), scalar raster
fields, lodGroup, volume classification, icon eye offsets, the dash gap
colour, box shapes, courseBlendMs (courseGlide covers easing), relief
surface shading, globe clouds and water, sky atmosphere tuning, heightmap
and quantized-mesh terrain, WMTS and ArcGIS imagery, the batched cached
height read, the quality benchmark and the animated-style and overlay
pixel-ratio knobs. Capabilities clouds, water, celestial, agents, orbits
and benchmark go with them.
The lodGroup check becomes a displayRange check across two sets, the
height-query check uses an extruded polygon in place of a box, the shape
scenes draw extruded blocks where they drew boxes, and the fields scene
draws a raster shell. The shape references are recorded again.
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
Five new camera conformance scripts move the camera by user input: a
left drag that coasts, thirty pixel-mode and thirty line-mode wheel
notches from 5 km, a middle-drag tilt, and Shift and Ctrl drags held too
long to coast. The runner turns input steps into pointer events for a
driver: a move starts where the pointer last pressed or moved and carries
the held button. The golden recorder now drives Cesium's own screen-space
camera controller on a stand-in canvas, with Date on the virtual clock so
inertia is deterministic. The existing goldens are unchanged.
A harness that answers pointer input sets cameraInput and a pointer hook.
Harnesses without it, such as the stub, skip the input scripts.
The input port reported a line-mode wheel at 33 1/3 pixels a line. It now
counts lines as the reference does, 40 pixels a line and 3 lines a page,
so a pixel or line wheel converts back to the same pixels.
ModulationSector gains radius and floor and says what it dims and what it
leaves alone; picks are unchanged and setting or clearing a sector asks
for one frame. The stub names its pass screenModulation, and a
conformance check covers the pass, the frame request and the pick.
windStreamlines takes alpha and paused; rasterShell replaces detailWindow
with a detail image and rectangle and says how shells stack, blend and
update; FieldHandle.on('drawn') says once per change that it is drawn,
never while hidden. The stub fires it on the render after a change, and a
conformance check covers it. The Cesium adapter has no fields yet.
The globe port takes the globe's material only when it is free, follows a
terrain change, lets go of a material someone replaced, and takes it again
once it comes free; idle ticks ask for no frame.
A new capability, surfaceIdentity, adds globe.surfaceVersion(): a number
that changes whenever what surface heights answer against changes (base,
terrain or photoreal swapped, the globe shown or hidden) and never on
camera moves or tile loads, so the app can key cached heights by it. The
settle kind 'surface' says whether that surface has loaded what is in
view: the terrain while the globe is shown, otherwise the drawn tiles,
false with neither; a renderer without the capability answers it as base.
The Cesium globe port reads both off the scene, so a base changed around
the port counts too; its versions come from one counter shared by every
port. The stub bumps on real base, terrain, photoreal and visibility
changes. A conformance check and a globe port test cover them.
ShapeItem.lit picks the renderer's fixed light or a flat colour; omitted,
extruded shapes and boxes are lit and the rest flat, as they were. The
Cesium draw port lights unclamped colour and image fills by it; clamped
shapes still drape unlit. A new reference scene, shapes-lit, draws a lit
and a flat box and square.
LineItem.mode now says a renderer that cannot drape at all draws draped
lines and clamped shapes as overlay, and clampState() says overlay. The
Cesium port says overlay when its context has no depth textures, which
only a WebGL 1 context can lack.
Among sets that skip the depth test, a higher drawOrder draws over a lower
one whatever order they were made in, and picks name them topmost first.
Cesium draws the earlier of two opaque near-plane icons on top and picks
it, so the draw port stacks the sets' hosts with a higher order earlier,
ties in the order the sets were made. Hosts trade places only among the
slots draw-set hosts already hold, so no other primitive moves; nothing
moves while every set is at 0. Translucent items blend
order-independently in Cesium and are not ordered by it.
The stub sorts its hits the same way. A conformance check draws two icon
sets at one spot and swaps their orders.
The query contract now says picks answer against the scene as drawn before
effects, and that a drillPick limit bounds the work as well as the answer:
the renderer stops at `limit` hits and looks through at most
max(limit, 16) things under the pointer. The Cesium query port passes that
depth to Cesium's drill (a pick looking under something unpickable stays
unbounded), a click's drill caches one pass per depth, and the stub counts
unpickable items toward the depth.
CameraPose says fovy and aspectRatio describe the nearest centred
perspective frustum, the exact projection being in matrices().
A changed listener's own threshold is now the capability
cameraChangeThreshold; without it every listener fires at 0.5. The Cesium
and stub cameras have it, measured per listener without touching Cesium's
shared percentageChanged.
Conformance: draw.drillPick checks limit 0, never the surface, nothing over
the bare globe, an unpickable cover, nearest first and a bounded prefix;
query.pickBeforeStyles picks an icon under a mirroring style; the threshold
trace is skipped without its capability.
A rectangle shape gains an optional rotation: radians counter-clockwise,
turning it about its centre in longitude and latitude, as a KML ground
overlay turns; an image fill turns with it. A renderer that predates it
draws the rectangle unturned. The Cesium draw port passes it as the
rectangle's rotation and texture rotation, and now drapes image fills on
clamped shapes, each on a ground primitive of its own that owns its
material, where it refused them before. Hidden image fills are not built
until they show. The stub picks draped rectangles, turned and across the
antimeridian, and a conformance check picks a quarter-turned overlay on
both renderers. The KML importer still draws its overlays itself.
A line item gains an optional depthFailDash ({ length, pattern16? }): the
parts behind the surface are dashed in depthFailColor, as a dash style
dashes a line. Without a depthFailColor, and on draped lines, it is
ignored; a renderer that predates it draws those parts solid. The Cesium
draw port gives the depth-fail appearance a PolylineDash material, and a
change of dash is a new look. The Draw tool's rubber band uses
{ length: 16 }, the dash its old entity asked for (that entity, a dynamic
polyline, never drew its depth-fail material, so the parts behind the
surface were hidden before the tool moved onto the draw port).
The camera port gains an optional followFrame() (capability followFrame):
the frame the eye is placed in now, as a column-major 4x4 matrix to ECEF.
Once a follow has framed the camera it is the follow's own frame
(east-north-up, or the orbit frame an autodetect follow chose), under
lookAt the target's east-north-up frame, otherwise the identity. setView
places a world pose and keeps that frame. The Cesium port reads it from
camera.transform, only when the capability is on; the stub from its own
eye frame. A conformance check covers the world, lookAt and enu-follow
frames, the offset in it, and setView keeping it.
src/ui/shareFollow.js now reads the pose, the frame and the follow offset
through the camera and frame ports: a shared offset is re-expressed in the
follow's own frame as before, satellites included, and the eye is placed
with setView at exact heading, pitch and roll, so a near-vertical view
keeps its roll. placeFollowEye returns false on a camera that cannot say
its frame. offsetFromHeadingPitchRange moves to src/geo/frames.js, shared
with the stub.
The renderer contract gains an optional event on model draw sets,
`on('loadFailed', (id, message) => ...)`, beside `ready`: a model's url
failed to load, once per failed load. The item stays in the set drawing
what it drew before; removing it and adding it again tries at once. A
renderer that cannot tell a failure may never fire it.
The Cesium draw port fires it once Cesium is done with the frame it
raised the error in, and not for a load that was superseded or whose item
went. The stub fails urls under `stub-fail:`, telling each load once. A
conformance check (`draw.models.loadFailed`) runs on both, with a model
url the dev server does not serve for Cesium.
The flights and military layers use it in place of rewriting every
unloaded model every 5 s. A fleet model whose load failed is removed and
added again 5 s later. The tracked model gets back its per-selection
budget: a failed load is let go and tried again 1.5 s later, and after
three failures the contact stays 2D until another is selected, as
before the models moved onto the draw port. A good load retires the
budget, and a model that loads after all is kept.
The globe port could show or hide the globe surface but not say whether it
is shown. It now has an optional isGlobeVisible(), gated by a new
globeVisibility capability, in the Cesium adapter, the stub and a
conformance check. A Cesium scene without a globe does not offer it, so
callers keep their own default for an unknown surface.
The OSM overlays, the CCTV ground regime and the submarine cable drape now
read the getter instead of the scene's globe. cableClassificationTypeForScene
takes the viewer rather than its scene.
The effects port puts each style the app defines on its own post-process
stage, takes the scene's bloom stage and adds a sharpen stage, with the
mappings the application uses today. An animated style holds frames and
advances its time uniform while it draws. A replaced style keeps drawing
until its intensity is 0, so the app can crossfade; the contract, the stub
and a new conformance check say so. The conformance renderer has the
port; the application renderer does not yet.
The Cesium camera port follows a target with Cesium's own entity
tracking, on a hidden helper entity per target, and gains followed,
followFramed, followOffset and followChanged. A target with a minimum
range gets GEV's close-range rules, moved here from trackedCamera.js:
an exact first framing, no zoom coasting, a zoom floor, and an eye that
never crosses through the target. followChanged now fires only when
what is followed changes, on the stub too. No layer follows through the
port yet.