Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
- Clicks: when two tools want the globe's clicks, the newest takes them and the older is told and turns itself off; a click is decided when it arrives, and ambient selection fires only when no tool holds the pointer. The "map is busy" paths and their strings are removed.
- Recession: the limb fade is shared (src/render/recession.js) and reaches icon and model sets through SetSpec.recede; tuning applies on the next frame.
- Display panel groups are published through src/ui/displayGroups.js; the Weather group and src/viewWeather.js are removed.
- Draw port: a set whose icons only move is moved in place, and models that did not change are not restyled each frame, so moving fleets cost what they did when drawn directly; an untinted, fully opaque model is drawn without a colour.
- Conformance: input.lease.lost checks the new lease inside onLost and reports a throwing onLost; draw.sets.recede covers model sets.
- QA scripts read the renderer host instead of internals the seam replaced.
The seam drew the head as two stacked translucent lanes (a 5 px dark
backing under a 3 px colour line), which darkened its centre by up to 40
of 255 over light ground. It is now one 5 px line with a 2 px dark
outline in the same pass, as the head's own material drew it before.
Conformance gains draw.lines.outlineDraped: a draped, translucent,
revealed outlined line, its centre as bright as a plain line of the
colour, its edges dark, nothing past the reveal.
Before, the route was one clamped polyline whose material coloured it
ahead of the train and dimmer behind it, split exactly where the train is,
with a dark rim at its edges. Through the draw port it became per-segment
colours chosen by each segment's midpoint (the split jumped from vertex to
vertex) and lost its rim.
The contract gains a draped line style `split`: `color` from `at` (a
fraction of its length) on, `behind` before it (`reverse`: the other way),
and an optional `rim` (the outer `widthFraction` of its width at `shade` of
each colour). `at`, `reverse` and the colours change in place. The Cesium
renderer draws it with one material; the rail route uses it, measuring its
split in metres on the ground (one per vertex where the scene draws over
the surface). New conformance check draw.lines.split.
The contract gains offsetScalesByDistance: the pixel offset grows and
shrinks with scaleByDistance, as Cesium's pixelOffsetScaleByDistance does
with the same curve. rotationMode 'axis' now also turns by rotation, as a
Cesium billboard with an aligned axis and a rotation does. Cesium draws
both on its billboards; its GPU icons take the rotation and refuse a
scaled offset; the stub picks both. New conformance check
draw.icons.offsetTurn.
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.
Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
- Cesium's own tweens (its flights) step on the renderer's clock, so the
flight traces compare frame by frame; dispose gives the scene its own
clock back.
- moveStart and moveEnd are measured each tick on that clock, by the
shared move detection, a change of the field of view or aspect
included; Cesium's own events timed them by the system clock.
- A follow of a drawn item tracks where the draw port draws it.
- Pick rays are summed from the eye's axes: Cesium's lose about 1e-9 of
direction at a near plane of 0.1 m. Ellipsoid picks and the view
rectangle use them; a canvas with no size has none, as in Cesium.
- The harness always runs the virtual clock and claims 120 checks: 119
pass on the page and query.heights skips. The five pointer traces
need a camera controller there, and are recorded from Cesium's own
controller in Node.
- The package boundaries list the cesium plugin export and the modules
its groups now import.
createCesiumRendererPlugin({cameraController}) (render/cesium/plugin) puts
the camera port on the shared camera controller over a native camera on
Cesium's (controlledCamera.js): poses written exactly, out of any lookAt
transform, the vertical field of view as Cesium's wide-side fov and kept
on a resize. Cesium's own controls hold their input off and their
collision off while it drives; the controller runs before and after the
preUpdate listeners, and what it throws is reported. A followed item's
position is where its GPU icon set draws it (drawnPosition), and the
input port's camera holds are the controller's.
The conformance harness, given a controller, steps a virtual clock 1/60 s
a frame for ticks and pointer events, so flights and pointer scripts are
compared frame by frame.
src/render/vectorBase/ is a Cesium-free painter: loadVectorStyle loads
a style and its TileJSON sources and compiles its layers (skipping, with a
reason, what it does not draw), and paintVectorTile paints a Web Mercator
tile on a canvas: background, fill, line and circle layers with filters in
both syntaxes, legacy functions and a listed subset of expressions, and
symbol text labels placed clear of each other inside the tile. Sources are
decoded with pbf and @mapbox/vector-tile, already dependencies. The Cesium
port loads the style before changing the base, draws it as Web Mercator
imagery under the base's other imagery, credits its sources, and claims
vectorBase; the stub loads the style. globe.base.vector serves a style and
tile from data URLs and reads the drawn fill.
clusterScreenPoints over each GPU set's shown rows at the frame's
motion-clock time (on their ground when clamped), the members' rows hidden
and one icon a cluster drawn at its seed's size in the set's cluster
billboards, picked as each member. Clustered again after the camera moves
or the set changes (setColumns included), and every frame while rows still
move. Conformance checks take several capabilities; draw.motion.cluster
clusters members that come to rest on their segments.
Each row reads its extras from a float texture by instance (texelFetch on
gl_InstanceID), so the 16 vertex attributes hold: pixel offset, vertical
anchor, screen rotation and aligned axis (turned as billboards turn),
fadeByDistance, displayRange, and a ground mode with the heights under its
segment's two ends. Clamped rows are sampled after a frame draws, budgeted
across the port's sets (terrain first, then the drawn surface), and again
when the globe's tiles finish loading. WebGL 1 still refuses these; GPU sets
still refuse clustering. The stub picks icons offset, anchored, turned and
clamped to its ellipsoid, and draw.motion.look checks each on a moving icon.
Sets other than icons take setColumns as the rows the columns make over
the items they hold, replacing every item as set does, as the stub does,
so renderer.shape holds on Cesium and joins its checks.
A layer given a timed source hides its own imagery and draws the frames
its clock shows (the scene's time, or setFrameTime on its own clock) as
Cesium layers just above it: the nearest frame, or in blend mode the later
over the earlier at its share of the way, with the next prefetch frames
loading unseen at alpha 0. Video segments are seen every 250 ms, each tile
its video seeked to the time's share of its length. frameReady names the
nearest frame once every globe tile drawn shows its own imagery. The
check globe.imagery.frames now runs on Cesium, and globe.imagery.video
draws a recorded video's frames.
Each frame drawn, a set's host turns the draw commands it gave to the set's
blend before the scene sorts them: opaque draws every command in the
opaque pass unblended with depth writes; translucent alpha-blends every
command without depth writes; additive adds colour times alpha without
depth writes, still depth-tested, after the opaque commands and before the
order-independent translucent pass. Ground commands only blend
differently. Lines, shapes, models, quads, meshes and GPU icons take every
blend, live through setOptions (models do not load again); GPU icons no
longer refuse opaque or additive. The contract documents the semantics and
the checks draw.sets.blend and draw.models.blend read the pixels. The
package boundaries own setBlend.js and screenCluster.js.
Clustered icon sets cluster with clusterScreenPoints over the shown icons
each frame drawn after the camera moves or the set changes. A cluster draws
one icon (icon(count), else a count badge) at its members' mean in place of
the members; a pick on it answers each member, seed first, at the cluster's
position. GPU icon sets refuse clustering. The stub clusters the same way,
the contract documents the semantics, and the check draw.icons.cluster
covers it.
Clamped outlines were refused; they are now draped lines, a ground polyline
a ring (a polygon's rings, an ellipse cut in 64, a rectangle's turned
corners) under the shape's pick id. Clamped extruded shapes, clamped walls,
and clamped image fills where the scene has no depth textures were refused;
they now stand on the surface unclamped, the surface height read when the
set is built (an extrusion from the lowest point under it, a wall's foot
under each position). The new conformance check draw.shapes.clamped draws
each kind; Cesium runs it.
Segment colours and shows were drawn on draped solid lines only. Any other
segmented line (3D, geodesic or draped; glow, dash, arrow, flow, pattern or
an outlined solid) now draws a primitive a segment, each with its style's
material in the segment's colour under a pick id that reads as the line's,
recoloured and shown in place; an arrow's head is on its last segment, and
a revealed line shows each segment by its share of the length. Draped
pieces swap in with the set's other ground primitives. Pattern lines drape
on a ground polyline of their own, and an inertial line with a depth-fail
style is a primitive turned with the sky each frame. The new conformance
check draw.lines.segmentStyles picks shown and hidden segments of five
mode and style pairs before and after an in-place change; Cesium runs it.
With EXT_disjoint_timer_query_webgl2 the Cesium renderer lists gpuTiming:
while frame signals have listeners, each drawn frame is timed from preRender
to postRender and a signal carries gpuMs of the newest timing back (a
disjoint one is dropped); queries are reused and let go on dispose. Without
the extension it answers 'none', as before. The new conformance check
quality.signals.gpuTiming pins both; the stub's timed frames carry 0 ms.
An autodetect follow already rode Cesium's AUTODETECT tracking frame; the
capability now says so. The new check camera.follow.autodetect follows a
still target (range kept, its frame east-north-up on it) and one at orbital
speed (range kept frame by frame, its frame on the target with z up); the
stub and Cesium both run it.
Icons on billboards and on the GPU, line patterns, shape fills, quads and
raster shells take a URL, SVG, a blob (one object URL per blob), a keyed
canvas (packed into the GPU icon atlas as it is, by its key) and an atlas
slot as the image it holds. Blobs and canvases were refused on the GPU
path, blobs on billboards, and atlas slots everywhere but billboards. The
new conformance check draw.icons.images draws each kind on still and
receding icons; Cesium runs it.
A solid line's outline.widthPx is the outline in all, half on each side and
inside the line's width, as Cesium draws it. The range ring's pulse fronts
pass their halo width whole again, so they keep main's look, and the
conformance check draw.lines.outline pins the width. The lines scene's
outlined line keeps its 2 px edge each side and its references are
re-recorded.
Shapes take their radii in metres; the world annotation ring follows the
camera height itself (ringRadiusAt), resizing on preRender. The radial rim
preset and depthBias go: the launch pad zone draws a canvas image fill made
by the layer. Solid and dashed lines take one depthFail look (solid or
dash) in place of depthFailColor and depthFailDash. sonarCadenceHz goes from
the quality settings: nothing set it, and the sweep moves every 80 ms.
Camera move, look, rotateAround and zoom leave the camera port: the app's pans,
in-place turns, globe turns and zooms are setView views summed over the pose
(geo/eyeMoves), and the Cesium port places a view by direction and up
exactly rather than through heading, pitch and roll. The conformance driver
runs those script steps through setView; the lookAt script turns in place
where it turned about the frame-local axis, and its reference is recorded
again.
Drops from the contract, the stub, the Cesium renderer and the
conformance suite: agent paths, renderer-propagated orbits and celestial
draws (orbits stay drawn as icons and inertial lines), scalar raster
fields, lodGroup, volume classification, icon eye offsets, the dash gap
colour, box shapes, courseBlendMs (courseGlide covers easing), relief
surface shading, globe clouds and water, sky atmosphere tuning, heightmap
and quantized-mesh terrain, WMTS and ArcGIS imagery, the batched cached
height read, the quality benchmark and the animated-style and overlay
pixel-ratio knobs. Capabilities clouds, water, celestial, agents, orbits
and benchmark go with them.
The lodGroup check becomes a displayRange check across two sets, the
height-query check uses an extruded polygon in place of a box, the shape
scenes draw extruded blocks where they drew boxes, and the fields scene
draws a raster shell. The shape references are recorded again.
Draped lines take the arrow style. Clamped ellipses with radii by camera
height are drawn at the camera's height each frame, drawn alone up to
MOVING_SHAPES (counting those a retiring host still draws alone) and
rebuilt past that. Extruded shapes that classify their volume draw as a
ClassificationPrimitive where the scene supports it, and extruded
polygons draw their outline cage. The stub picks clamped rectangles,
ellipses and classifying volumes, outside their holes. Conformance
checks radii by camera height and classifying volumes on both renderers.
The Cesium draw port now implements draw.field for the windStreamlines
kind (src/render/cesium/drawStreamlines.js). It carries the flow shader,
the 30-degree cells, horizon and frustum culling and the path tracing over
from the wind layer. It moves the highlight on the page's own frames, at
most every 32 ms, and only while the field shows, is unpaused, has alpha
and some cell is in view on a visible page. A grid no path runs through,
or one short of the whole globe, is refused. A rebuild that fails draws
nothing and is never told drawn.
The wind layer's GPU flow (src/layers/wind/gpuRendering.js) now builds the
spec, fades it by camera height and pauses it through the draw, camera and
frame ports, and no longer reaches Cesium, so it leaves the Cesium allow
list. The layer runs no animation loop of its own while the renderer draws
the flow; the canvas fallback is unchanged and still takes over wherever
the field is refused. A new conformance check covers the field's 'drawn'
events.
The Cesium draw port now implements draw.field for the rasterShell kind
and advertises the 'fields' capability. The shell surface (a raised
rectangle with a detail window, drawn in primitive order without depth
writes) moves from the weather layer into src/render/cesium/drawFields.js.
A new rectangle or height is drawn invisibly first and swapped in whole,
and 'drawn' is told in the frame of the swap. A stage of older content
never replaces the drawn one while newer content decodes. A field hidden
mid-stage keeps building it.
The weather shell (src/layers/weather/shellRendering.js) now drives one
field through the draw, camera, frame and globe ports and no longer
imports Cesium, so it leaves the Cesium allow list. The wind shell on
photoreal hosts also draws through draw.field. The conformance page runs
each visual scene on its own, so a kind the Cesium renderer does not draw
yet (scalarRaster) fails only its own scene.
The adapter's effects port now has screenModulation: a contract sector
shades points, billboards (labels among them) and icon sets in their own
vertex shaders, swapped into this scene's command list as the primitives
update, and tints models on the CPU after every owner has written its
colour. Geometry and picks are unchanged. It is the sweep the cyber HUD
already draws, carried into src/render/cesium/screenModulation.js and
driven by a sector instead of document settings; nothing is installed
until a sector is set, and disposal gives everything back.
The capability is advertised on the Cesium version the command swap is
tested against; diagnostics list the pass while it draws, and listeners
hear when it starts or stops (a native shader it cannot take stops it).
A set asks for a frame unless it changes nothing drawn: the same sector,
or only the angle of a sweep while no shaded marker was in view.
cyberSonarSector() gives the sector for the cyber sweep; the app switches
to the port in the next commit.
Conformance: the screenModulation check runs on Cesium; new checks read
the pixels (in the band an icon draws, outside it and at radius 0 it dims
to the floor, strength 1 draws it in the colour, clearing restores it) and
check the member is absent without the capability.
The globe port takes the globe's material only when it is free, follows a
terrain change, lets go of a material someone replaced, and takes it again
once it comes free; idle ticks ask for no frame.
A new capability, surfaceIdentity, adds globe.surfaceVersion(): a number
that changes whenever what surface heights answer against changes (base,
terrain or photoreal swapped, the globe shown or hidden) and never on
camera moves or tile loads, so the app can key cached heights by it. The
settle kind 'surface' says whether that surface has loaded what is in
view: the terrain while the globe is shown, otherwise the drawn tiles,
false with neither; a renderer without the capability answers it as base.
The Cesium globe port reads both off the scene, so a base changed around
the port counts too; its versions come from one counter shared by every
port. The stub bumps on real base, terrain, photoreal and visibility
changes. A conformance check and a globe port test cover them.
Among sets that skip the depth test, a higher drawOrder draws over a lower
one whatever order they were made in, and picks name them topmost first.
Cesium draws the earlier of two opaque near-plane icons on top and picks
it, so the draw port stacks the sets' hosts with a higher order earlier,
ties in the order the sets were made. Hosts trade places only among the
slots draw-set hosts already hold, so no other primitive moves; nothing
moves while every set is at 0. Translucent items blend
order-independently in Cesium and are not ordered by it.
The stub sorts its hits the same way. A conformance check draws two icon
sets at one spot and swaps their orders.
The query contract now says picks answer against the scene as drawn before
effects, and that a drillPick limit bounds the work as well as the answer:
the renderer stops at `limit` hits and looks through at most
max(limit, 16) things under the pointer. The Cesium query port passes that
depth to Cesium's drill (a pick looking under something unpickable stays
unbounded), a click's drill caches one pass per depth, and the stub counts
unpickable items toward the depth.
CameraPose says fovy and aspectRatio describe the nearest centred
perspective frustum, the exact projection being in matrices().
A changed listener's own threshold is now the capability
cameraChangeThreshold; without it every listener fires at 0.5. The Cesium
and stub cameras have it, measured per listener without touching Cesium's
shared percentageChanged.
Conformance: draw.drillPick checks limit 0, never the surface, nothing over
the bare globe, an unpickable cover, nearest first and a bounded prefix;
query.pickBeforeStyles picks an icon under a mirroring style; the threshold
trace is skipped without its capability.
An undraped solid line (straight or geodesic, without a depth-fail colour,
not revealed, at least half a pixel wide) is drawn by the set's polyline
collection at once, as before. Once the set's lines have not changed for
30 drawn frames, every such line is built into static batches beside the
collection: a primitive of polyline geometries for opaque colours and one
for translucent ones, each line coloured and shown by its own instance
attributes under the pick id it had. A batch builds hidden, off the main
thread, and swaps in for the batch before it and the collection's
polylines once it is ready, each line showing as its item then asks. A
polyline collection works out every line's material every frame; a batch
costs nothing until it changes. The data centre stems (4,362 lines) cost
about 16 ms a frame in the collection and about 0.01 ms settled.
A batched line changes its show, colour and meta in place. One that moves,
or whose colour moves it between the opaque and translucent passes, leaves
its batch, hidden there, for the collection until the set settles again;
when a batch exists and fewer than 64 lines are left in the collection,
they settle after 300 frames, as rebuilding the batch for a few lines
costs more than drawing them. A line in the collection that moves or
changes colour drops a batch still building; a show change does not. A
colour-only change of such a line is now made in place in the collection
too, where it rebuilt the set. A batch whose build fails is reported once
and its lines stay in the collection. Glow, dash, arrow, flow, pattern,
revealed and depth-fail lines draw as they did.
The shared conformance suite checks solid lines left unchanged for many
frames still pick, hide, recolour and move in place.
A set of unclamped points drawn by one point collection now takes new
points and removals where it is, instead of building the collection
anew; its pick ids and horizon cull follow, and the draw port's version
changes only when pick ids do. A point moved or restyled in place sets
only the members of its look whose values changed, and writes its
position without allocating, so a set moved every frame makes nothing
new. A draped line drawn by a material of its own takes a colour-only
change on its material, and unmoved lines sent again compare their
positions without flattening them. The shared conformance suite checks
points joining and leaving a set one by one.
A rectangle shape gains an optional rotation: radians counter-clockwise,
turning it about its centre in longitude and latitude, as a KML ground
overlay turns; an image fill turns with it. A renderer that predates it
draws the rectangle unturned. The Cesium draw port passes it as the
rectangle's rotation and texture rotation, and now drapes image fills on
clamped shapes, each on a ground primitive of its own that owns its
material, where it refused them before. Hidden image fills are not built
until they show. The stub picks draped rectangles, turned and across the
antimeridian, and a conformance check picks a quarter-turned overlay on
both renderers. The KML importer still draws its overlays itself.
A line item gains an optional depthFailDash ({ length, pattern16? }): the
parts behind the surface are dashed in depthFailColor, as a dash style
dashes a line. Without a depthFailColor, and on draped lines, it is
ignored; a renderer that predates it draws those parts solid. The Cesium
draw port gives the depth-fail appearance a PolylineDash material, and a
change of dash is a new look. The Draw tool's rubber band uses
{ length: 16 }, the dash its old entity asked for (that entity, a dynamic
polyline, never drew its depth-fail material, so the parts behind the
surface were hidden before the tool moved onto the draw port).
The camera port gains an optional followFrame() (capability followFrame):
the frame the eye is placed in now, as a column-major 4x4 matrix to ECEF.
Once a follow has framed the camera it is the follow's own frame
(east-north-up, or the orbit frame an autodetect follow chose), under
lookAt the target's east-north-up frame, otherwise the identity. setView
places a world pose and keeps that frame. The Cesium port reads it from
camera.transform, only when the capability is on; the stub from its own
eye frame. A conformance check covers the world, lookAt and enu-follow
frames, the offset in it, and setView keeping it.
src/ui/shareFollow.js now reads the pose, the frame and the follow offset
through the camera and frame ports: a shared offset is re-expressed in the
follow's own frame as before, satellites included, and the eye is placed
with setView at exact heading, pitch and roll, so a near-vertical view
keeps its roll. placeFollowEye returns false on a camera that cannot say
its frame. offsetFromHeadingPitchRange moves to src/geo/frames.js, shared
with the stub.
The renderer contract gains an optional event on model draw sets,
`on('loadFailed', (id, message) => ...)`, beside `ready`: a model's url
failed to load, once per failed load. The item stays in the set drawing
what it drew before; removing it and adding it again tries at once. A
renderer that cannot tell a failure may never fire it.
The Cesium draw port fires it once Cesium is done with the frame it
raised the error in, and not for a load that was superseded or whose item
went. The stub fails urls under `stub-fail:`, telling each load once. A
conformance check (`draw.models.loadFailed`) runs on both, with a model
url the dev server does not serve for Cesium.
The flights and military layers use it in place of rewriting every
unloaded model every 5 s. A fleet model whose load failed is removed and
added again 5 s later. The tracked model gets back its per-selection
budget: a failed load is let go and tried again 1.5 s later, and after
three failures the contact stays 2D until another is selected, as
before the models moved onto the draw port. A good load retires the
budget, and a model that loads after all is kept.
The globe port could show or hide the globe surface but not say whether it
is shown. It now has an optional isGlobeVisible(), gated by a new
globeVisibility capability, in the Cesium adapter, the stub and a
conformance check. A Cesium scene without a globe does not offer it, so
callers keep their own default for an unknown surface.
The OSM overlays, the CCTV ground regime and the submarine cable drape now
read the getter instead of the scene's globe. cableClassificationTypeForScene
takes the viewer rather than its scene.
A models set kept one primitive per build and loaded every model again on
any change. Each item now keeps its own Cesium model: an update re-poses it
(position and orientation), and changes its scale, pixel floor, maximum
scale, shading, tint, colour blend, environment map, display range and show
where it is. Only a new url loads again, and the model it draws stays until
the new one is ready. `ready` fires once per load. Each frame before the
scene draws, the set caps models at their maxPixelSize, scales and fades
them by distance, and hides them past the horizon in a horizonCull set. A
load that fails is let go after its update, and stays a failure for
whenSettled until its item changes.
The stub fires `ready` only for a new item or a new url, and draws models
into readPixels as tinted squares. Its harness has a model asset now, so the
model checks run on it. New checks: a model moves, turns and restyles
without loading again, and only a new url loads it; its tint and colour
blend change live.
A draped solid line with segment colours or shows draws each segment as a
ground polyline instance of its own in the set's ground batch, under a
pick id that reads as the line's, so changing its colours or which
segments show writes their attributes without a rebuild; a change made
while the ground still builds is written as it swaps in. Undraped or
non-solid segmented lines are refused, and a segmented line of no length
builds no ground. The shared conformance suite changes a segmented
draped line every frame.
The Cesium draw port now drapes glow and dash lines as well as solid and
flow ones, each with its own ground primitive.
revealFraction is the fraction of the line's length, measured along the
line. Both renderers cut there: Cesium discards fragments past the cut in
the line's material, so the hidden part neither draws nor picks; the stub
cuts the line before drawing and picking.
A draped line whose positions change is rebuilt the same frame, on a ground
primitive of its own, once terrain heights are loaded; until then it is
rebuilt as before. A clamped dot whose look is unchanged is moved in place.
The stub now picks lines. A new shared conformance check, draw.lines.drape,
covers draped glow and dash lines, the reveal cut, a draped line growing
every frame, and a clamped point moving every frame.
Lines take the flow style, draped or not: the route annotation's flowing
dashes as a material whose clock the port runs each frame, asking for
frames while a shown set shows flow lines. Undraped lines with a
depth-fail colour draw it where the surface hides them, and one that moves
is built anew in place under the same pick id, so a line updated every
frame neither rebuilds its set nor blinks. A draped style the port cannot
drape is refused before the set changes. The shared conformance suite
draws both kinds and moves a depth-fail line frame by frame.
Unclamped points that move on an upsert now move on the point they have,
keeping their pick id and horizon cull, instead of rebuilding the set.
Points and clamped dots honour displayRange as icons do. The shared
conformance suite checks moved points and point display ranges, and the
lodGroup check now passes on the Cesium renderer too.
An icon set whose items move along motion segments, glide their course,
recede toward the limb, pick through a larger proxy or switch images by
drawn size, or that takes columns, now draws as one instanced
IconSetPrimitive in place of its billboards. The set switches the first time
an item needs it (or columns arrive) and stays switched; a course blend
alone switches it only when everything it holds can go. The Cesium ports
advertise columns, motionSegments and courseGlide.
GPU sets refuse loudly what billboards draw and they do not: clamped
heights, fadeByDistance, displayRange, offsets, anchors other than the
centre, axis and screen rotations, opaque and additive blends, images other
than URLs and SVG, and more images than the shared atlas has room for. A
refused write changes nothing.
The shared icon columns gain an image switch size, a pick proxy and a
per-row depth-test distance (defaulting to always over depth, as before),
arcs gain a climb rate, and the epoch rebases in both directions. Rows keep
asking for frames while they move, turn or blend; a write that moves a row
as it already moves (a restyle, a focus change) leaves its segment alone.
Billboard icons now fade with focus as GPU ones do.
Conformance gains columns and motion checks for the Cesium adapter.
Cesium icon sets now draw an item's scaleByDistance, fadeByDistance and
displayRange, as point sets already draw their curves, and drop them again
when a restyle in place leaves them out. An empty display range shows the
icon nowhere; a curve whose far end is not past its near one is left out
rather than refused mid-update. Cesium eases between a curve's ends rather
than interpolating linearly, as it always has for points.
The reference renderer now scales an item's pick size by its distance curve
and leaves out items faded or scaled to nothing, and the draw.icons.distance
conformance check covers all three fields.
An icon set's upsert, set, remove and an atlas registered again now restyle,
move, re-image, add and remove billboards in the collection the set already
has, so markers no longer blink as every image reloads on each change. A
changed image swaps on its own billboard; the old one keeps drawing until
the new one has loaded.
The set is still built anew where changing it in place would not draw the
same: when new icons would land ahead of drawn ones, when a set reorders
its items, when a key's generated image comes as a new canvas, when the
set is emptied, and when its collection would hold many more images than
it draws (a collection keeps every image it has loaded).
Adds the draw.icons.update conformance check.
The globe port sets the base (photoreal tiles, terrain, imagery), shows
or hides the globe, and adds imagery layers: XYZ, WMTS, ArcGIS, world,
single-image and canvas sources, with admission, fetch and transform
hooks, a request budget and tile errors. Each layer drapes where its
drapeOn says: on the globe, or on the drawn base tileset, which is the
port's own photoreal tileset or one the map stack marks as its base,
followed every frame so a base switched outside the port moves the
layers. Port layers keep their order above other layers in each
collection. The sky reads the scene and writes through to it, and the
port reports settling and load progress.
The application renderer and the conformance renderer both have it, so
the application renderer now has every member of the contract. A viewer
with no renderer bound gets a globe port through findGlobe. The Cesium
conformance run checks imagery order, the split and the image-hook gate.