Commit Graph
15 Commits
Author SHA1 Message Date
Sameh Khamis 4fe8796e89 Swap refreshed Data Library features in place, on every tick
The live refresh had three faults. Its data age counted from when a
fetch finished, so with the manager ticking every cacheSeconds the next
tick found the data just short of due and data refreshed every other
tick. It switched the layer off and on to redraw, which removed the old
features before the new ones were built, closed an open feature card and,
if the rebuild failed, left the layer on but empty. And the tick the
manager runs right after enable refetched after a failed first load, so
a second failure switched the layer off instead of showing UNAVAILABLE.

The local GeoJSON layer gains replaceFeatures(): it builds the new set
while the old one stays drawn, removes the old source only once the new
one is in the scene, keeps a selected feature that is still in the new
set (same id, or same place and label), and on a failed rebuild puts the
old features, records and selection back and rejects. The library's
refresh uses it, counts age from the request, allows a little slack on
the tick, and does nothing until a first load has succeeded.
2026-11-12 17:47:29 -08:00
Sameh Khamis d58ba23fba Refresh live Data Library datasets once older than cacheSeconds
A dataset layer loaded its features once and kept them until it was
removed: the parsed set survives disable/enable, so NWS alerts, GDACS and
EONET showed what they held when first switched on for the whole session.

A library dataset now asks the manager for a refresh every cacheSeconds.
Once its data is that old it loads again, and swaps the new set in only
when it is ready, so the old features stay drawn while the request runs
and stay if it fails. An enable after cacheSeconds also loads afresh.
Disable and destroy cancel a refresh in flight.
2026-11-12 15:48:14 -08:00
Said Turksever db80d82b8d Add the Data Library: live regional datasets, tiles and packs
DATA LAYERS keeps its curated core layers; regional and niche sources
live in the Data Library, opened from Browse data library at the foot
of the panel. Each entry is a JSON manifest in src/library/entries/
pointing at a live upstream (query API, provider-hosted file or tile
endpoint), so nothing is bundled and a self-hosted instance hosts no
data. Sources without CORS go through one allowlisted /api/library
route. Kinds: dataset (GeoJSON, CSV, JSON records, ArcGIS, partitioned
GeoParquet), tiles (XYZ, WMS/ArcGIS bbox export, terrarium relief) and
pack. Selections persist and travel in share links as lib=, separate
from the core layer tokens. Library rows get Zoom and Remove icon
chips that work while the layer is off, rendered through RailChips.
Strings are translated in every locale.
2026-11-12 12:26:45 +00:00
German Khokhlov 65f0467ad8 fix(infrastructure): sample visible ground below the ellipsoid 2026-11-03 15:10:15 +04:00
quanticsoul4772andClaude Opus 5.5 f392eecbd9 fix(infrastructure): test ground below 0 m and unknown terrain correctly
The ellipsoidal horizon test hid ground below the ellipsoid (low-geoid
coasts, the Dead Sea) from a camera near it, so it is now tested at 0 m.
With the globe hidden the ground is tested as the vertical from 0 to
9,000 m against the frustum planes, in place of a 4.5 km sphere that let
in much unseen ground.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-29 01:47:05 -07:00
quanticsoul4772andClaude Opus 5.5 ecc0ced47c fix(infrastructure): test the ground, not the ellipsoid, for in-view sampling
An unsampled base sits at ellipsoid height 0. Over high terrain seen at an
angle that point projects below the screen while the ground above it is in
view, so the gate skipped ground the camera could see and never sampled it.
The gate now tests loaded globe terrain when there is some, and otherwise
the whole span of heights a sample can accept (0 to 9,000 m).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-29 01:25:57 -07:00
quanticsoul4772andClaude Opus 5.5 6d6ad20ad3 fix(infrastructure): ground-sample only stem bases the camera sees
scene.sampleHeight reads only surface rendered for the current view. For a
data centre or dam base outside the frustum or over the horizon it read
through the Earth (about -6,344 km over Ashburn on Esri), failed the 9,000 m
check and retried every 2 s indefinitely, one offscreen render per record.
Over Ashburn that held rest frames at 58-589 ms. Unseen bases are now
skipped without being stamped, so each is sampled on the first walk that
sees it, and they no longer arm the retry render.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-29 00:41:30 -07:00
Sameh Khamis a8e5ff9390 refactor: move infrastructure data parsing into a portable source module
The datacenter and dam layers parsed their bundled GeoJSON Lines and
built analyst records inside the Cesium-backed layer module. Move the
data URLs, the line parser, mapAnalystRecord and layerTitle unchanged to
src/sources/infrastructureData.js; the layer module imports them and
still exports mapAnalystRecord. The consumer-build pin lists the new
module.
2026-10-01 13:34:26 -07:00
f4fcf267c6 fix(osm): stop using public Overpass by default (#648) (#742)
Traffic roads come from OpenFreeMap vector tiles, or TomTom flow tiles with a
key (Hybrid by default). Military areas use OpenFreeMap polygons with a bundled
worldwide name index; wide views show named points. ALPR reads an hourly
OpenStreetMap extract. Cockpit place context and country, state and US county
outlines use bundled Natural Earth and US Census data. Overpass is used only
when an operator configures their own endpoint.

Also: camera arrivals no longer land below ground, keyless terrain retries on
429, bounded relation geometry for configured Overpass, one shared
OpenStreetMap credit, and separate tile and API transports for embedders.

Co-authored-by: theGaryLarson <[email protected]>
Co-authored-by: Milan Khanal <[email protected]>
2026-09-28 19:07:57 -05:00
0251c74109 feat(weather): add globe wind, observed weather and cyclone context (#617)
Wind (NOAA GFS and ECMWF IFS: animated particles, colour field, a reading at map centre), observed weather (NOAA MRMS radar, GOES and NESDIS infrared clouds, lightning density) on one shared history timeline, NHC and CPHC cyclone advisories with tracks and cones, and a WEATHER panel in the right rail. On 3D Tiles the observed products render as raised shells with a sharper window around the view.

Co-authored-by: Gustavo Beneduzi <[email protected]>
Co-authored-by: Daniel Slay <[email protected]>
Co-authored-by: Rehaan Delmotra <[email protected]>
Co-authored-by: Cursor Agent <[email protected]>
2026-09-22 17:45:39 -05:00
Bilawal Sidhu 9fc8d1966b feat(annotations): draw on the world by hand (#547)
Supersedes #235 by @cora-fresh-labs, ported onto the current component layout with fixes from review.

Verified before merge: format, package boundaries, unit suite, build, and the browser tracking suite; a browser harness for the change where one applies; adversarial review applied.

Future work (not in this PR): hand-drawn marks do not persist across a reload today, and neither do spoken annotations; there is no storage layer for marks. The natural home is Scenes: a drawing that belongs to a shot and persists per shot, so a scene animation can carry its own marks. Needs an owner.
Co-authored-by: Clint Borle <[email protected]>
2026-09-14 19:59:26 -05:00
Bilawal Sidhu 499e1168a7 fix(layers): release bundled GeoJSON entities on toggle-off instead of hiding them
Toggling datacenters, dams, or submarine cables off only set `show = false`
on their data sources. Cesium's DataSourceDisplay still walks every
visualizer of a hidden source each frame, and the ~11.5k hidden entities
(hundreds of MB) stayed resident, so the whole scene rendered ~2x slower
for the rest of the session after a single on/off round trip (owner field
test 2026-09-13).

disable() now removes the data sources from the viewer and drops the built
records; the parsed dataset (NDJSON features / TeleGeography JSON) is cached
so enable() rebuilds without a refetch or re-parse. A disable that lands
while a load is in flight releases the finished build instead of parking it
hidden. destroy() clears the cache.

Measured with a headful Chrome harness (flights+military+satellites on,
camera rotating, 250-frame windows), before -> after:
- entities resident after OFF: 11,537 -> 0
- DataSourceDisplay.update per frame after OFF: 1.09 ms -> 0.02 ms
- scene.render per frame after OFF: 13.9 ms (control 6.6 ms) -> 5.2 ms
  (fresh baseline 5.0 ms in the same run)
- JS heap 30 s after OFF: 1.6 GB and climbing -> 342 MB after GC

Tests: the GeoJSON lifecycle and cables suites assert disable leaves zero
sources/contexts and re-enable rebuilds with fetch called once.
2026-09-13 17:08:23 -05:00
Sameh Khamis f70b5a3631 style: format the reusable infrastructure component 2026-09-11 16:07:53 -07:00
Sameh Khamis ed15c5b38e style: remove inherited trailing whitespace from extracted layer 2026-09-11 13:35:52 -07:00
Sameh Khamis 142bf583f8 refactor: export infrastructure layers with explicit application callbacks 2026-09-11 13:21:22 -07:00