Commit Graph
288 Commits
Author SHA1 Message Date
Manjunath 99520b529c fix(camera): keep the globe in view from orbit
From the whole-globe view the camera could end up facing empty space with
only stars on screen. Cesium's free look (Shift+drag) turns the camera in
place, and from 18,000 km the planet's edge is only about 15 degrees from
nadir, so a few drags turned it out of frame. The rolled pose was then
saved into the share hash, so a reload or shared link opened on stars too.

- Allow free look only below 1,000 km. Orbit, tilt and zoom are unchanged.
- Measure how much of the frame shows the planet's surface by casting a
  32x18 grid of view rays at the WGS84 ellipsoid. While the scope mask is
  on (the default) only the rays inside its keyhole count, since the mask
  hides or dims the rest of the frame.
- When a camera move ends above 1,000 km with no ray on the surface, turn
  straight down at the same position and heading. Limb glow and a sliver
  up to about one grid cell thick can count as out of view. The end of a
  move comes from Cesium's moveEnd and from a check of its own that
  samples the pose every 250 ms after moveStart and acts once it has held
  for half a second: at some of these poses the camera drifts by a
  rounding error every frame, so Cesium never sees it stop and never
  raises moveEnd. The zoom-out guard from #1522 keeps wheel and pinch
  zoom-outs in view; this catches the other ways a move can end looking
  away, such as a saved or shared view that did, or a
  drag that Cesium turns into an in-place look below its 7,500 km
  trackball height (one that starts on the stars, or a tilt drag with the
  screen centre off the planet). Views with more surface, tracked or
  locked cameras and the 2D and Columbus modes are left alone.
- Voice tilt and in-place turns of a free 3D globe camera above 1,000 km
  stop when about a tenth of the frame still shows the planet (or about as
  much as it showed when it started, two grid cells of sampling noise
  allowed), never below about 1% of the visible frame; a view that already
  shows less only keeps or gains what it has. A turn that cannot go half a
  degree further without crossing that limit is refused with a reason
  instead of reported as done, and a turn it accepts turns at least that
  half degree. A turn that keeps or gains surface is not refused, even
  after the window has been resized, except that near the limit, where the
  planet's edge crosses the sample grid, sampling wobble can occasionally
  refuse one (most often above about 15,000 km and on phone or ultrawide
  frames); nothing then turns away from the planet. A turn that starts
  where the last voice turn left the camera keeps that turn's limit, or a
  higher one if the planet now fills more, so repeating the request does
  not take any more; once anything else has moved or turned the camera, a
  turn is measured from what is on screen. A request made while the camera
  is tracked is judged by the pose voice's release of the follow camera
  will leave, before that release, so a refused turn keeps the tracking.

The frame measure and the look-step limit live in src/globeInView.js,
shared by the viewer and the voice camera verbs.
2026-11-04 01:17:47 +05:30
Said Turksever 34f694c6f2 Merge upstream main (voice geometry: resolve_area, find_imagery, osm_query) into pr/street-level-show-action 2026-11-03 18:05:11 +00:00
Sameh Khamis 553f0c06ee Merge branch 'main' into feat/voice-geometry 2026-11-03 09:49:42 -08:00
Sameh Khamis cc3d61a960 fix(camera): keep the zoom ceiling fixed while tracking a target
While the camera tracks an entity or looks at a point, Cesium measures
zoom distance from the target, not the Earth. Raising the ceiling to the
camera's altitude then lifted it with every outward step, so a tracked
camera could zoom out without limit. The guard now follows the altitude
only for an untracked 3D camera and otherwise keeps its 40,000 km
ceiling.
2026-11-03 09:29:22 -08:00
Sameh Khamis 9e3786716d test(camera): pin that application controls install the zoom-out guard
The guard's own tests pass even if createApplicationControls stops
installing it. This checks the ceiling and frame listeners are in place
after construction and gone after teardown.
2026-11-03 09:11:51 -08:00
Sameh Khamis b817d5802b fix(camera): let a two-finger tilt win over finger-spacing drift
Above 300 km the guard treated any shrinking pinch distance as an outward
zoom, so a two-finger tilt whose fingers drifted slightly closer had its
pitch overwritten. A two-finger gesture now counts as a zoom only when the
spacing changes more than the fingers' midpoint moves.
2026-11-03 09:10:58 -08:00
Sameh Khamis e4b3933166 fix(camera): read zoom input at the ceiling when the scene is idle
The guard reads its input in preRender, which Cesium only fires on frames
that draw. In request-render mode, wheel input at the ceiling doesn't move
the camera, so nothing drew and the input was applied later by an
unrelated frame. The guard now requests a frame through the render
governor whenever it has unread input.
2026-11-03 09:10:30 -08:00
Sameh Khamis 08ff7f3e9d fix(camera): let a camera above the zoom ceiling zoom in without a jump
Cesium clamps any zoom that starts above maximumZoomDistance to that
limit, in either direction, so a share link or flight that left the
camera above 40,000 km jumped to the ceiling on the first wheel tick.
While the camera is above the ceiling, the guard now uses its current
height as the limit and lowers it as the camera descends.
2026-11-03 09:09:55 -08:00
Sameh Khamis 51637a5e96 Merge branch 'main' into feat/voice-geometry
# Conflicts:
#	SECURITY.md
#	scripts/format-scope.json
#	src/app/constructCatalog.test.mjs
#	src/app/sourceComposition.test.mjs
#	src/firstRunExperience.test.mjs
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
#	src/voice/actionSchemas.test.mjs
2026-11-03 09:07:16 -08:00
Sameh Khamis d5a568e55f Merge branch 'main' into fix/zoom-out-runaway 2026-11-03 09:04:51 -08:00
Sameh Khamis 65587f6c08 Keep tracked-entity state in app records instead of on Cesium entities
Flights, military, satellites, installations, local ADS-B and ALPR hung
gevTrackedId, gevDisplayPosition, gevVisualPosition, gevSelectionOrigin and
gevLabelModel on the Cesium entities they draw, and the tracked readout,
follow camera, cockpit, share links and awareness read them back. They now
live in src/data/entityRecords.js, an app-owned record per entity: layers
write entityRecord(entity), readers use readEntityRecord(entity). Nothing
changes on screen. This is the first slice of the renderer plan's state
mirror (P1).

The module is exported as ./data/entity-records so callers can read the
same records, and window.__godsEyeView.entityRecords gives the QA scripts
the same access from the page.
2026-11-03 08:09:00 -08:00
Said Turksever 0ec57057fa fix(street-level): review fixes for show_street_level and sl= links
P1: on a phone the Street Level panel sits in the Cameras tab sheet, so the
action and sl= links opened photos nobody could see and still reported
success. A photo that opens, and a link that arms, now open that sheet
(revealPanel). In cockpit, clean view, recording or scene playback the action
stops at a new `view` stage before anything switches or loads.

P2s:
- Mapillary's nearest search asks for 100 photos, the API's most. It cuts
  the radius's photos at the limit in no particular order, so 8 left the
  distance sort and the imagery filter a few arbitrary photos.
- The MCP globe panel opens a billed photo only for a result issued in the
  last five minutes (show_in_gods_eye_view stamps issued_at); a host that
  mounts the panel again hands back the old result, which only arms.
- OPEN uses an armed link's point only while the view centre is within 1 km
  of it; a user who moved on opens what the view shows.
- show_in_gods_eye_view measures a camera's altitude from the terrain under
  it before taking its look-at point, so high cities no longer put the
  photos kilometres too far ahead.
- The armed-link toast is translated, and the new view-stage message too,
  in all 11 catalogs.
- Tests: a turn superseded during the geocode, flight or map switch changes
  nothing; an unknown key state lets a cold sl= link through; a wide tilted
  area still opens photos at its centre.
2026-11-03 15:30:48 +00:00
Said Turksever 8ce01cf48e Merge upstream main (OSM sea-mark and ski-piste overlays) into pr/street-level-show-action
Keeps main's locale catalogs and re-adds this PR's eight Street Level strings; re-pins the Realtime payload digests for main's two new overlay layers, where the unchanged tools match main's pin, so show_street_level is still the whole difference.
2026-11-03 15:12:11 +00:00
Said Turksever a236504347 fix: respect camera ownership and finish outward zoom framing 2026-11-03 14:32:30 +00:00
Said Turksever 98de41c94a feat(street-level): "show me X on Street View" action, street_level view field and sl= links
show_street_level (voice and typed) flies to a place and opens its nearest
street-level photo from Google Street View, Mapillary, KartaView or
Panoramax; Street View switches to Google 3D first. The view model gains a
street_level field, share links carry sl=<source>,<lat>,<lon>, and
show_in_gods_eye_view can open a photo. A plain sl=google link only arms the
point and waits for OPEN, so it never bills a key without a click.

Embed pages show an open photo in an overlay that Esc closes. On-screen
strings are translated into es, ru, zh-CN and zh-Hant. Covered by unit tests
and three new steps in the Street Level browser suite.
2026-11-03 14:32:02 +00:00
Said Turksever e6a6ba0126 fix: keep the globe on screen when zooming out from a tilted view
Cesium zooms a shallow view out by backing along the cursor ray with
heading and pitch held fixed, and GEV set no zoom ceiling. Past ~700 km
the limb drops below the fixed pitch, the steps grow with height, and
the camera flies off into space.

Cap user zoom at 40,000 km (whole-Earth view; flights are not limited)
and, above 300 km during a user wheel, pinch or right-drag zoom-out,
ease the pitch down to at least 8 degrees below the Earth's limb. The
clamp yields to disabled inputs, tracked transforms and camera flights.
2026-11-03 13:50:16 +00:00
Manjunath ecaddd838b Merge feat/voice-geometry onto main
Both stack parents (#837, #842) are on main, so the voice geometry branch
now builds on main directly. Conflict resolutions keep main's behaviour and
add the geometry work on top: osm_query gating on every provider, restored
admin identity for Nominatim outlines, merged analyst follow-up memory, and
the cancelled Globe View reset instruction ahead of the generic cancellation.
2026-11-03 14:33:34 +05:30
Matt Van Horn 351a47ee22 Merge remote-tracking branch 'upstream/main' into fix/drone-airspace
Resolve the CURRENT-STATE.md layer table by keeping main's realigned
table and adding this layer's row. Main added an Arabic locale, so
translate the 12 layer strings and list ar.json in the drone-airspace
package.
2026-11-02 16:10:41 -08:00
Sameh Khamis 0d96fe6acd Merge branch 'sameh/world-clock' into sameh/world-timeline-launches 2026-11-02 13:14:32 -08:00
Sameh Khamis 32e08f5043 Merge remote-tracking branch 'origin/main' into sameh/world-clock
# Conflicts:
#	index.html
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
2026-11-02 13:14:32 -08:00
Said Turksever bd7ef69843 Merge branch 'main' into prereq-10-osm-overlays 2026-11-02 17:48:19 +00:00
Said Turksever 4ebb287d36 Merge main into the Utilities panel, rebuilt on the Vue panel rail
main moved the panels to Vue views and a one-open-panel rail, and removed
the two templates this branch edited. This merge carries the branch onto
that architecture; it adds no behaviour of its own beyond the port.

- The Utilities panel is a RailPanel in LayerPanelsView with its own rail
  item (handyman). LayerPanel renders the Directions rows into its list with
  LayerRows, and falls back to Data Layers without it.
- Draw leaves DisplayPanel for DrawControls, DrawMarkList and DrawSwatches,
  which render what the draw tool publishes to the display store and call
  its actions, as GeoImport does. drawMarks.js words the rows; the DOM-built
  drawMarkList.js is gone. A row's fly-to is an immediate navigation like
  Import's ('drawing' gets its Cockpit refusal), the name field keeps a
  draft through v-field-value, and the colours are one radio group with a
  single tab stop.
- UiSegmented draws an option's icon, named by its label, for the shape
  buttons.
- The catalogs take main's languages with this branch's strings, Arabic
  included, and the tests follow the views to their new homes.
2026-11-02 16:43:29 +00:00
Said Turksever fc7ff1055c Split Open Map Overlays into Sea Marks and Ski Pistes layers
Each overlay is now its own Infrastructure row instead of a chip on one
shared row: sea-marks (token 6) and ski-pistes (token 7), both
enabled-only, built by createOsmOverlayLayers() from one descriptor
list. Drops the option group and its share-codec defaults, gives each
layer its own name, voice entry and CURRENT-STATE row, and shifts the
token-ledger fixtures to the next free digit 8.
2026-11-02 16:20:08 +00:00
Said Turksever ce1ad3b95a Merge main into prereq-10-osm-overlays and port Open Map Overlays
Main moved on since this PR opened; the overlay layer is ported to the
current contracts:

- Layer-state token 6 (j belongs to transit; new single-character
  tokens are digits) with a reservation-ledger row, and the option owner
  renamed to the layer id so the compact share codec can encode it.
- Constructed per catalog by createOsmOverlaysLayer() in
  constructCatalog.js; src/standalone/data.js no longer registers layers.
- Drapes through maps/imageryHost.js, so the overlays show on Google 3D
  (tileset imagery) as well as the globe stacks, and follow map-stack
  switches. Imagery layers are created on enable and destroyed on
  disable/destroy.
- Translated chip labels and layer name in every locale, LAYER_NAME_KEYS,
  Infrastructure panel group, voice manifest entry.
- Attribution: OpenSeaMap tiles CC BY-SA 2.0, OpenSnowMap credit as
  required, OSM ODbL credit for both; bulk-download note in DATA_SOURCES.
- CURRENT-STATE row, changelog fragment, share-codec absent defaults,
  updated token-ledger fixtures and voice schema pins.
2026-11-02 15:55:40 +00:00
Sameh Khamis e7973e81cf Stop zooming out while the globe is still in view
Cesium sets no limit, so zooming out left the globe a speck among the stars.
On the globe a hand now stops zooming out where the globe spans 30% of the
screen's height, which follows the screen's shape as the app's own
whole-globe view does. A camera already past it, after a flight or a turned
screen, stops there rather than jumping in at the next zoom. Flat maps keep
zooming out unlimited.
2026-11-02 07:27:53 -08:00
Sameh Khamis 0c4da3cdb2 Keep one world clock that every timed layer reads
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.

Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).

- The weather clock takes its time from the world clock and drives its
  replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
  transit, GNSS, Recent Imagery, street level, the HUD and the celestial
  ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
  time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.
2026-11-01 21:47:32 -08:00
Sameh Khamis 5605fdc60a Merge Core main into sameh/core-vue
railCardBlocks.js is the Vue wrapper on this branch, so main's verbatim
legend units move into RailCardBlocks.vue.
2026-11-01 17:37:56 -08:00
Sameh Khamis b20c80e590 Switch language in place, without a reload
Choosing a language in the picker now applies it at once. The choice is
stored and ?lang is kept in step through replaceState, and the picker keeps
focus.

Code that writes translated text itself re-presents it on a switch:
onLocaleChange() lets an owner listen, removed at teardown, and status
writers hand over a function of the locale (voice cards, scene director,
SDR, draw hints, imagery split, map sources, Bhote Koshi media) so the
words are rebuilt rather than re-sent. The HUD, cockpit, radio, CCTV,
launch, awareness and credit texts follow the same hook, and
applyDocumentTranslations can be applied again without undoing text code
wrote since.

The unsaved-work registry and persistLocaleAndReload existed only to guard
the reload, so they go, with their catalog entries.
2026-11-01 16:47:39 -08:00
Sameh Khamis 42c3cc12b1 feat(import): render the file import in a GeoImport view
The file import no longer looks up or listens on the Import button, the
picker or the list, and no longer restores focus itself. It connects
importGeoFiles, toggleGeoImport, flyToGeoImport and removeGeoImport to
the display store. A new GeoImport view owns the button, the picker, the
rows and the hint: it opens the picker once the import has presented
itself, sends the pick and the row buttons' actions, and hands keyboard
focus on with v-focus-safe-children before a focused row goes, to the
next row's same button, else the previous row's, else Import.
2026-11-01 10:23:35 -08:00
Sameh Khamis a6e85db8be feat(draw): answer the Draw controls through the display store
The draw tool no longer looks up or listens on its controls. It connects
toggleDraw, setDrawShape, setDrawColor, setDrawLabel and clearDraw to the
display store, which now holds several owners and lets the newest owner
of an action answer it, and it publishes the colour and label beside the
shape, state and hint. The Draw panel renders the shape choice with
UiSegmented and binds the label and colour to what the tool publishes.

The label field's own Enter listener goes: the session's capture-phase
key handler already finishes the shape from that field.
2026-11-01 10:10:27 -08:00
Sameh Khamis c03b4a7643 feat(hud): render the Intel HUD from a store
IntelHUD no longer builds #intel-hud with innerHTML or writes its readouts
by id: it publishes its readouts, typing summary, REC blink, visibility,
layout variant and style colors through its publish option to the gev-hud
store, and the intel-hud application view renders them. The corners render
from mount so the panel layout controllers register them as obstacles.

The vessel layer presents the selected vessel's readout through
src/hudReadouts.js, which IntelHUD follows, instead of writing into the
HUD. The Cyber sonar state answers a HUD toggle from IntelHUD's visibility
rather than the class the view renders on its next update.
2026-10-31 22:18:50 -07:00
Sameh Khamis 5bf797ef71 refactor(build): place the views in the page instead of expanding templates
index.html now lists each view's host and the loading screen itself, so
the gev:template expansion plugin, its view list, the loading-screen
template and the ./build/html export are gone. createApplication takes
omitViews for views an application leaves out; their hosts are removed,
and a view an earlier call rendered is unmounted.
2026-10-31 17:52:47 -07:00
Sameh Khamis e1bbbcec5a Let a GNSS integrity source set the layer's evidence window
The catalog now passes the gnss-integrity source's windowMs to the layer.
A missing, non-finite or non-positive value keeps the 30-minute default.
The row text now names the window the layer uses instead of a fixed 30 min.
2026-10-31 14:33:48 -07:00
Sameh Khamis a068a45a89 feat(ui): render the Display panel's imported file list from the store
The file import publishes its rows and hint to the gev-display store and DisplayPanel renders them, keyed by file, so a toggled row keeps its controls. Keyboard focus is given back once the list has rendered: a removed row's next row, else the previous one, else the Import button; a second change before the render keeps the first target, and focus moved elsewhere meanwhile stays there.
2026-10-31 00:05:25 -07:00
Sameh Khamis b870df4199 feat(ui): render the Display panel's Draw controls from the store 2026-10-30 23:45:03 -07:00
Sameh Khamis 6802c9c8b0 feat(ui): render every application template except the loading screen as a Vue view
The scene chrome, cockpit, Display controls, command dock, layer panels,
Context rail, welcome card and Provider Settings move verbatim into
src/ui/views and mount into their hosts before the page is translated and
wired. Each view renders the same elements, attributes and text as its
template; Vue keeps whitespace between elements as one space, and no view
markup sits under a white-space: pre rule.

Template asset URLs stay literal, view files are left out of Prettier so
the markup is not reflowed, and the Node component loader moves to build/
and is exported as build/register-vue for host test runners. Hosts that do
not initialize Core's locale pass localePicker: false instead of editing
the markup.
2026-10-30 17:47:52 -07:00
Sameh Khamis 9d24945143 feat(ui): render application templates as Vue views mounted before wiring
Templates listed in build/applicationViews.js expand to mount hosts, and
mountApplicationViews() renders them before translation and wiring. Markup
tests read the page through a server-side render helper, the i18n scanner
reads view templates, and Vue preserves whitespace so views keep the exact
DOM. No template is converted yet.
2026-10-30 17:23:45 -07:00
Said Turksever 828417f98b Merge remote-tracking branch 'upstream/main' into pr1469-fix 2026-10-30 15:17:15 +00:00
Matt Van Horn 4a74420e7b Merge remote-tracking branch 'upstream/main' into fix/drone-airspace
# Conflicts:
#	src/i18n/locales/uk.json
2026-10-30 00:14:42 -07:00
Matt Van Horn f01393c41d Merge remote-tracking branch 'upstream/main' into fix/drone-airspace
# Conflicts:
#	src/i18n/locales/es.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/zh-CN.json
2026-10-29 06:19:47 -07:00
Said Turksever 8543b7be43 Keep Directions reachable and tested in the Utilities panel
Voice show_data_layers_menu opens the panel that holds the row, so asking
for Directions opens UTILITIES and reports that panel, not a hidden row
under Data Layers. In Cockpit the panel stays with Directions alone, as
Data Layers does; only Draw and Import step aside there.

Draw's options sit flat under its name instead of keeping the card that
hung under a DISPLAY button, and its Shape label no longer takes DISPLAY's
label column in other languages. Cyber marks Draw on with its red edge.

LayerPanel routing, the voice panel choice, and the panel's order, mode
and phone-sheet CSS gain tests that fail on the earlier code. The form-field
and segmented-control gates open Utilities for Draw's controls, measuring
Scenes and Utilities in turn since the left rail fits one tall panel.
README, CONTRIBUTING, the PR template, CURRENT-STATE and comments now say
UTILITIES for Draw and Import and list the Audio group, and two files
outside the format scope lose an unrelated reflow.
2026-10-29 11:53:15 +00:00
Said Turksever 3b6111be06 Open views naming the retired Snow style on Normal
createView threw on style 'snow', so an embed host or a
show_in_gods_eye_view call holding a view from before Snow was retired
was refused outright, camera and layers included. viewFromParams read
style=snow as the recipient's own style, while the app opened the same
link on Normal.

Both now read a retired style as Normal; truly unknown names still
throw. The retired list moves to a browser-free module shared by the
view API, the share codec and visual settings.
2026-10-29 11:34:19 +00:00
Said Turksever f7a7a76fb5 test(embed): pin the panel-aware visibility wiring in data setup 2026-10-28 14:06:53 +00:00
Matt Van Horn 4c2159a70a Merge upstream/main into fix/drone-airspace
Move the share-link token to 6 (3 is gnss-integrity), build altitude
ranges from LOWER/UPPER VAL, UOM and CODE, mark card and legend strings
for translation, rename the layer to Prohibited & Restricted Airspace,
move the changelog entry to changelog.d, and keep the layer voice-off
while the Realtime prompt is at its budget.
2026-10-27 05:06:05 -07:00
nu-statsandClaude Opus 5.5 48bfaa787a Merge main; give the HUD visibility test's camera a moveStart event
Main now listens to camera.moveStart in IntelHUD's constructor (#1384), so
the fake camera in src/hudPageVisibility.test.mjs needs that event too, as
hudAltitudeDatum.test.mjs already has. No change to the fix itself.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-26 21:56:44 -04:00
Sameh Khamis da02fd8645 feat(share): short /share/<code> links with a compact versioned view format (#1418)
* feat(share): add compact versioned share-view codec

Add a standalone codec for `#s=<base64url>` share links: a version byte
followed by protobuf-style tag-length-value fields. Settings equal to
their default are omitted and refilled from the same table on decode;
unknown fields are skipped by wire type, so new fields never break
older apps. Views are a place (camera) or a thing (an aircraft,
military aircraft, vessel or satellite to follow, with camera offset
and last-known fix); an unknown kind falls back to the camera.

The decoder bounds its input and rejects malformed payloads with a
reason instead of throwing. A converter maps the long form's parsed
state to and from the codec state; the long form is unchanged.

* fix(share): tighten codec decoding after review

Unknown detection mode and allocation names now fall back to their
defaults instead of reaching the lenient long-form migration. Future
panel values and style-parameter tokens are skipped rather than applied
or rejected, and layer options are accepted only under their owner
layer. Wrap longitudes before scaling, normalize negative zero, reuse
the layer-state tracking ID grammar, and align the format doc with the
decoder.

* feat(share): let a host share the link its own way

ShareLinkManager.buildLink() returns the current share link without
copying it, and copyLink() now copies exactly that. The share button
passes the link to an optional services.shareLink(url), which resolves
to 'shared', 'copied', 'cancelled' or false; 'cancelled' shows no toast
and 'shared' shows the new "Link shared" (es, ru, zh-CN). Without the
service the button copies as before.

* feat(share): open and make short /share/<code> links

The share button now makes `<app>/share/<code>` links with the compact
share-view code, and the app opens them at start-up through the same
restore pipeline as long links. Once the app next writes the address, the
share path is replaced (no new history entry) by the app's own address and
the live long-form hash, so a reload follows the live view. A host can pass
the code as `initialShareCode` instead. A code that fails to decode restores
nothing and shows "This share link can't be opened".

The code gains a trailing CRC-8 check byte, so any single mistyped
character is rejected instead of opening a different view. Thing views no
longer store a camera: it is derived from the entity's last-known fix and
the follow offset on a sphere, the entity kind is implied by the id's
field, and the followed entity's layer bit is implied; an aircraft followed
from the app's own camera is a 42-character code. The `#s=` hash form is
gone.

While the camera follows an aircraft, military aircraft or satellite, the
link is a thing view with the camera's offset and the entity's position.
Opening one turns the layer on and follows the entity through the existing
shared-follow restore, then swings the camera round to the shared offset; a
vessel view selects the vessel once the vessel feed has it. If the entity
is not reporting within its window, the view stays at its last-known fix
and says so. The panel and style-parameter tables now come from the codec,
and a host share hook that returns a plain value or throws still gets a
toast.

* fix(share): encode style settings against the style's own look

Settings a style applies when selected (bloom, sharpen, HUD, detection,
celestial ring and the style's shader parameters) now default, per field,
to what that style applies in a fresh session, read from the tables the
app applies (the first-load baseline, the style presets and the shader
defaults). The encoder compares against the view's style and the decoder
fills omitted settings from the decoded style, so a view that keeps its
style's look costs only its camera and style. The previous defaults did not
match a fresh session (sharpen, HUD and detection were off), so every link
paid for them, and a style's own shader parameters were always written.

A test pins the per-style defaults as frozen v1 meanings. A followed
aircraft in Noir is now 44 characters and the real long-link example 39.

* docs: changelog for #1418
2026-10-26 15:31:51 -07:00
Mazeyar Moeini Feizabadi 4da002bd42 Merge current main into S2 GhostMaps and preserve updated import and voice behavior 2026-10-26 16:25:49 +01:00
Mazeyar Moeini Feizabadi 4a18af5426 fix: address GhostMaps resource and source ownership review findings 2026-10-26 16:24:34 +01:00
Sameh Khamis 2006c035d9 chore: remove four modules nothing in the app uses (#1403)
* chore: remove four modules nothing in the app uses

src/app/sourceSlot.js re-exported src/sources/sourceSlot.js, which every
caller imports directly. src/data/flowTiles.js and src/data/issPass.js were
reached only by their own tests. src/data/localGeojson.js wrapped
localGeojsonCore.js with the app's services, which the catalog already
passes itself. The local GeoJSON layer tests now build layers the way the
catalog does, so they keep covering localGeojsonCore.js; only the test of
the wrapper's own default host goes. Boundary lists, format scope and docs
drop the removed paths.

* docs: changelog for #1403
2026-10-25 17:21:41 -07:00
quanticsoul4772 69fba2ebbe fix(perf): free a turned-off layer's entities that Cesium keeps (#1367)
Release stale Cesium command references after disabling a layer while preserving current-frame commands.

Contribution by @quanticsoul4772.
2026-10-25 12:36:50 -07:00