createApplicationCatalog takes an optional placement provider. Its
layer(kind) hands Flights, Military Flights, AIS Vessels, Transit and Rail
a place(id, wallMs), and optionally observe(id, fix) and forget(id). While
live, each layer tells it every fix it accepts and draws a contact where it
places it: position, height (the layer's own when none is given), course
and speed. A null answer, a provider that throws, a kind it leaves out, or
no provider at all keeps the layer's own motion unchanged, and following
the world clock the layers never ask it. A transit vehicle or train it
holds still lets the render loop idle and is asked again each second;
vessels ask for frames only while it places one, and stop when the layer
turns off.
Tests show the layers draw and reconcile exactly as before without a
provider and with one that places nothing, draw where a provider places
them, and idle while it holds them still.
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.
Under the seam:
- The render failure notice lives in the Cesium adapter
(src/render/cesium/renderFailure.js) and is the application hook
renderFailureNotice({allowReload, store}); its private Cesium fields
(Event's raise queue, the widget's render loop flag) are read through
internals.js. The inline panel's timer waits while the frame port reports
the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
the draw port; the fleet model test fakes answer loads through the fake
draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
camera port.
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.
Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
Four test files built the same widget on CesiumWidget.prototype, viewer
proxy, store and notice; renderLoopFixture.mjs now does it once. The notice
test drives Cesium.Event instead of a hand-made double. frameEvents() drops
tileset.tileLoad, which Cesium raises inside its own error handling, and the
notice no longer guards a viewer without a canvas or requestRender.
The fleet models (#1714) draw nearby trains and vehicles under the 3D toggle. A
held one now leaves out its model as it does its icon, as the Vessels layer does
for its bridge subject: its model item is hidden, and handing the visual back
to its icon keeps the icon hidden while held. Tests drive each layer with the
real fleet-model layer and a stubbed glTF loader; both fail without the fix.
121 GLBs under public/models/fleet (about 2 MB, MIT like the code) with
catalog.json and types.json. src/data/fleetModels.js picks a model by ICAO
type, aircraft class, emitter category, AIS ship type and size, GTFS route
type, transit mode or rail category, and sizes it life size; the set loads
once, up front. Trail anchors are measured from the meshes.
startPageLocale, followPageLocale and switchLocale start, follow and switch
the page's language as the standalone application and the globe picker do,
for an application that offers the language elsewhere and passes
localePicker: false. The standalone application uses them.
Selecting a vessel asks Open Vessel Photos (a free, keyless API) for its
photo by MMSI, once per MMSI. The CONTACTS view shows it under the vessel's
name and MMSI with the photographer, the photo's open licence and a link to
the vessel's page; only images on Open Vessel Photos' own host are shown, and
an answer about another MMSI is no photo. The vessel source exposes the lookup
as getEnrichment({kind: 'photo'}) and fetchOpenVesselPhoto for applications
with their own vessel source.
GEV itself registers no new subject: with no provider, the Cockpit offers
aircraft, satellites and vessels as before, except that the most recently
selected of them now wins entry.
- services.cockpitSubjects: providers ({kind, layerId, entryFace, priority,
isEntryAllowed, read, hold, release, hud}) are checked once by the
coordinator; frames and HUD views on every update; a throwing provider
ends its view or keeps the last HUD.
- Entry: the most recently selected subject wins, across all kinds.
- Camera: a frame may turn the ground clamp off, anchor exactly on the
subject and update every frame.
- A generic HUD: kicker, title, cards, always-visible source rows, banner,
a veil with light streaks (off under reduced motion) and a bottom
progress line whose close ticks merge.
- Text comes from the provider, already in the page's language
(./i18n/locale: getLocale, onLocaleChange).
- Rail and Transit read and hold APIs (getSelectedTrain/Vehicle,
getCockpitSubject, setCockpitSubject, focusTrain/Vehicle); a held
train's marker, card and route line are hidden, and its feed keeps
polling while held.
- ./layers/rail/paths is exported.
A weather frame source's regional tiles reach the renderer through the
imagery layer's fetchTile, drawn and handed over as PNG bytes, a null tile
one shared transparent tile; the camera-owner watch listens on the
renderer's canvas.
Live trains from 30 keyless operator feeds: GPS positions from 29 and
Irish Rail's station reports, shown as the operators publish them. 28
work out of the box; Renfe long and medium distance and KTMB appear once
their pack is built, because their vehicles name no route.
Packs are opt-in (scripts/build-rail-paths.mjs): the operator's own
route lines, stop names, next stops and trip-update delays for live
trains. Nothing downloads when the app starts, no train is placed from a
timetable, and no request carries a deployer's key.
Translate the 148 strings main added since (mostly the News layer) and
prune the 5 it no longer uses; keep both Hebrew and Swedish in the
language lists.
- An error a frame of the inline panel's timer throws no longer reaches the
host page; it has been raised as a render error by then.
- An error Scene raised and threw on (rethrowRenderErrors) is raised once.
- After a lost context, later render errors are only logged, so the notice
keeps saying why.
- A render error without a value shows no detail.
- The globe's tile load progress and the scene's tileset load events are
finished too when a listener's error cuts them short.
- Focus goes back where it was when the globe draws again, or to the map.
- The appearance counter and the guard for a missing viewer are gone.
Tests cover every finished event, a thrown timer frame, a single report under
rethrowRenderErrors and the focus return; the inline tests share one setup.
A renderer plugin may supply applicationHooks(renderer) for what only its
renderer has (map engine, own credits, stale commands, QA handles). What every
renderer should do moves onto the contract: controls.keepEarthFramed (behind
the keepEarthFramed capability), query.occlusionTest (behind occlusionTest),
and panel drawing, which keepPanelRendering now does through resize and
frame.renderNow through the contract. renderNow throws when the frame fails to draw.
The Cesium port installs its zoom-out guard through keepEarthFramed (a setView
no longer cancels its turn) and answers occlusionTest with the scene's probe;
the stub answers it with a horizon test.
Upstream's layers and changes are carried onto the ports, with no Cesium
outside src/render and no reach into the viewer:
- Shipwrecks draw as one icon set, clicked through the input dispatcher.
- News draws through draw sets, the camera port and the input dispatcher;
its beacons pulse each frame through the frame port.
- The scene occlusion probe moves into src/render/cesium and reaches
detection through a new application hook, createOcclusionProbe; its
private Cesium reads go through internals.js.
- Flight and military trails, the stale and SIGNAL LOST cue, coasting and
following the world clock run on the draw and frame ports. GPU icons
follow the scene clock while the world clock is followed, and fade when
stale. A report that holds is not planned again every tick.
- Vessels are keyed by their record id.
The stub boot now enables military, shipwrecks and news as well.
- On a renderer whose plugin does not show its credits in a display of
its own (the ownCreditDisplay hook; Cesium's does), the application
shows what the credits port lists at the bottom left (#gev-credits):
inline credits on the line, the rest, the layers' data credits among
them, in the Data attribution list it opens. The button and list are
keyboard operable; Escape closes the list and returns focus. Text is set
as text; links and logos keep only safe schemes.
- The panel, Cockpit and overlay layouts keep clear of it as of Cesium's.
- The stub boot check fails when the credits line is not shown or its list
is empty; it keeps its report when the run stops early, counts only the
dev server's providers and other origins as feeds, and a failed default
renderer load is retried without dropping a newer one.
- dev/stub-app/main.js starts the standalone application on the stub
renderer with only the contract's required members (?capabilities=all
gives it every capability) and steps its frames.
- npm run qa:stub-boot serves the application's own page with that entry,
and fails when any Cesium module or asset is requested (the stylesheet
the build's Cesium plugin links into every page is reported), on a page
or console error, or when a data layer fails to turn on or off. A feed's
failed response and the dev server client's own errors are reported;
--strict also fails a layer that drew nothing.
- The browser CI job runs it.
- RENDERER-CONTRACT.md and CURRENT-STATE.md describe the application on
the stub and the boot check.
Main added the News layer at the same places: both layers are kept in the
layer names, panel order (News stays last of Events), standalone sources,
voice manifest, credits, DATA_SOURCES and the CURRENT-STATE table. News took
share-link token 00 first, so Shipwrecks moves to 01 (ledger, registry,
CURRENT-STATE and the token tests). The catalog now has 40 layers and the
share-link registry 38. Shipwreck strings are added to the new Hebrew
catalog; the other catalogs keep both sides' strings.
Removing one source's wrecks on the page split merged records: a wreck both
sources list is one Wikidata record carrying EMODnet facts, so expiring
Wikidata dropped wrecks EMODnet still had, and expiring EMODnet kept its
facts. The page now keeps every shown wreck, marked stale, until the newest
source passes the limit, then clears them all. Adds a source test for the
reported ages and limit.
- The ~8,000 markers were one Cesium entity each; they are now one
BillboardCollection (as FIRMS, vessels and wildlife sightings do), ordered
at the bottom of the shared sprite stack so moving traffic draws over it.
- eyeOffset.z was the death toll in metres, so a 1,500-death wreck's marker
sat 1.5 km toward the camera and clipped or drifted when close. It is gone;
markers are added by rising toll, so a bigger toll still draws on top.
- The page asks every 6 h but the proxy changes data at most daily: the proxy
now sends a version that changes with either source's data, and the layer
rebuilds only when it does.
- Adds a controller test: enable/disable, teardown, draw order, unchanged
snapshots, a late response after turning off, and the period closing an
open card.
An error Scene catches itself marks Cesium's render loop stopped while the
loop's next animation frame is still queued. A Retry, or a tab shown again,
before that frame ran started a second loop, and the globe drew every frame
twice. The render and resize wrapper now keeps the loop marked running after
a call made while it ran; the queued frame stops it if nothing restarted it.
This also covers the inline panel's timer frames, so its own guard goes.
Takes main's per-point mesh floor readings (#1642) onto the seam's
port-based sampler: a spot refused only while the cell's DEM prior was
cold is probed again, each spot is recorded once, a cell keeps at most
sixteen readings, and grounded flights read the floor at the contact
held inside its sticky cell.
Ports the cockpit bridge view, the orbital view riding a satellite with
ground-site focus, satellite classes and draw-mark row actions onto the
renderer contract. The orbital view's imagery look-ahead pre-load is
dropped (no contract member); tiles load as they come on screen.
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
Brings in the wildlife sightings layer (#1591, iNaturalist and Acartia
sightings). Its badges, density glow and privacy cells draw through the
draw port: the badges and the glow are icons sets (iconCollection.js
batches point writes into one upsert per task), and the privacy cells are
ground-clamped shapes and lines sets swapped whole. The eye, the view
rectangle, clicks, projection, ground readiness and frames come from the
camera, query, input, globe and frame ports, so the layer, its card and
its placement no longer import Cesium.
Differences from main: the density glow is drawn as pixel-sized splats
(56 px) instead of metre-sized ones with a near fade; the card's pan eases
with cubicOut, the contract's nearest ease-out; ground heights are
resampled when the globe's load progress settles or its surface changes,
rather than on tileset load events.
Also fixes two things the last merge left: a double-click that starts on
the followed track and ends off it reaches the renderer's own follow again
(a press that cannot end a double-click on the track gives its hold back
at its release), and the Active Fires heat drapes under the weather
imagery, so weather turned on after it stacks above. CURRENT-STATE notes
that the 2D and Columbus scene-mode checks are gone.
Brings in voice camera tilt (#1520) and free look with globe-in-view
recovery (#1532). The tilt and look maths in cameraVerbs.js and
globeInView.js run on camera poses and the geo helpers instead of Cesium.
The free-look height limit lives in the Cesium adapter
(render/cesium/freeLookLimit.js), installed through the application viewer
hooks; the globe-in-view recovery that main added to app/viewer.js runs on
the camera port in app/globeInViewRecovery.js. The scene-mode checks are
gone with the 2D and Columbus modes the seam does not draw.
Brings in fire intensity and the draped heatmap (#1426), provider labels
(#1521), Rio transit (#1481), chat autocomplete and provider switching
(#1561, #1546) and Cockpit entry by the ridden layer alone (#1556).
What main added that reached Cesium or the viewer:
- The fires heatmap drapes as one image through the globe port's imagery
(heatImagery.js), above the port's other imagery, and drapes again when
the map stack's surface changes. The far bands no longer draw heat
rectangles; the layer's shape set stays as its initialized marker and
the visibility the context store reads.
- The hand-off between heatmap and markers fades the glow icons' own
alpha and the icon set's visibility. Markers keep their glows across
rebuilds; the set culls the horizon itself.
- A double-click on the followed track enters the Cockpit through the
input dispatcher. The renderer's own double-click follow would let go
of the track first and cannot be refused from a subscriber, so a press
on the followed track holds that behaviour off for the press.
- Cockpit entry and the ridden layer read the follow service; the camera
takes its eye offsets from a profile.
With Lines on, every progressive paint of a loading city rebuilt all road
lines: up to three ground-line primitives for as many as 1,500 roads, built
asynchronously. Builds started faster than they finished, and each kept the
set it replaced in the scene until it was ready, so sets piled up.
One set now builds at a time. A rebuild asked for while lines are building
replaces the one waiting, and the newest starts when the build finishes.
Lines replaced by a finished build are removed before the next one starts.
Turning Lines off removes the lines at once and drops the waiting rebuild.
Brings in range ring visibility and sonar pulses (#1518, #1519), the
drone airspace layer (#1086), the Houston CCTV pack (#1125), typed chat
(#1507, #1545), in-view ground sampling for infrastructure (#1464) and
the CCTV model specs refresh (#1319).
What main added that reached Cesium or the viewer:
- Drone airspace draws its zones as clamped fills and draped boundary
lines in draw sets and takes clicks from the input dispatcher, as fire
perimeters does.
- Infrastructure ground sampling tests the view frustum and the horizon
from the camera port's pose (geo/frustum, geo/horizon) and reads loaded
terrain through the height queries.
- The awareness lifecycle reads the canvas, frames and whether the camera
controls take input through the ports. The sonar echo field measures
with the geo helpers.
- The range ring's pulses need a disc whose fill is computed per pixel
from values set each frame, and an outlined line whose opacity changes
without a rebuild. The draw port has neither, so that code keeps to one
module, src/layers/awareness/rangeRingCesium.js, which is on the Cesium
allow-list until the draw port can draw them. It draws only on a viewer
with a Cesium primitive collection, and takes its primitives out of the
collection it drew them in. On the stub the layer draws the
ring without pulses as a haloed line through the draw port.
Also from review of the previous merge: tests that the scene's viewer
hooks install the zoom-out guard, and that an ambiguous area name is
settled by the ground at mid-screen, else where the camera stands.
Brings in radio country coverage (#1206), the restored format scope
(#1527), the zoom-out guard (#1522), voice geometry and OSM places (#846)
and paired traffic flow density (#1495).
What main added that reached Cesium or the viewer now goes through the
renderer:
- The zoom-out guard reads the Cesium camera controller's own input, so
it moves into the adapter (src/render/cesium/zoomOutGuard.js). The
application installs it through the scene's viewer hooks, and a scene
whose renderer gives no guard starts without one.
- OSM places draws its points as a draw set, clamped to the ground.
- The voice area actions read the view box and the view centre from the
camera port.
- The voice workflow harness is test support, named as such where the
recent-imagery doubles are.
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
Before merging: singular 'one' forms from the review table (44 entries),
counters keep their order across the slash (מתוך, as Arabic المن), the
lightning layer says ברקים (the legend now counts ברק strikes, the help
text keeps 110°E Latin), configured-elsewhere keys are promised
untouched, Punk is פאנק רוק, dock/panel side labels follow the mirrored
layout, and the HUD-summary English guard covers he (NON_LATIN_LOCALES,
tested) — documented in Adding a language along with format-scope.
Suggestions and nits: restricted is מוגבל, stage recovery is החבה not
שחזור, voice-inactivity names the behavior, lane directions use
attributes (השמאלי) and around is לאחור, Ironbow and KM/S stay Latin in
same-as-english, {age} no longer doubles לפני, typos and garbled words
fixed (תנאים, ידנית, ודאות, מקלט, זמניים, ערוץ 14, מעונן חלקית, אין אות
קריאה, Tab לתצוגה מקדימה, השאר ריק, היוועץ), counted units shortened
(שנ' דק' שע' ימ'), terminology unified (briefing תדריך, forecast תחזית,
course מהלך, אונייה, שריפה), rtl.css shares the mono redirect under
:is(:lang(ar), :lang(he)) and its comments match the rules,
worldOverlayTokens adds Noto Sans Hebrew to the canvas card fonts, he.md
gets the fraction-aware plural table, iw/iw-IL map to he (tested).
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.