Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
- Clicks: when two tools want the globe's clicks, the newest takes them and the older is told and turns itself off; a click is decided when it arrives, and ambient selection fires only when no tool holds the pointer. The "map is busy" paths and their strings are removed.
- Recession: the limb fade is shared (src/render/recession.js) and reaches icon and model sets through SetSpec.recede; tuning applies on the next frame.
- Display panel groups are published through src/ui/displayGroups.js; the Weather group and src/viewWeather.js are removed.
- Draw port: a set whose icons only move is moved in place, and models that did not change are not restyled each frame, so moving fleets cost what they did when drawn directly; an untinted, fully opaque model is drawn without a colour.
- Conformance: input.lease.lost checks the new lease inside onLost and reports a throwing onLost; draw.sets.recede covers model sets.
- QA scripts read the renderer host instead of internals the seam replaced.
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.
Under the seam:
- The render failure notice lives in the Cesium adapter
(src/render/cesium/renderFailure.js) and is the application hook
renderFailureNotice({allowReload, store}); its private Cesium fields
(Event's raise queue, the widget's render loop flag) are read through
internals.js. The inline panel's timer waits while the frame port reports
the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
the draw port; the fleet model test fakes answer loads through the fake
draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
camera port.
When a host stops animation frames, the panel drew from a timer with the
viewer's render(): the camera's flight and input, the clock's tick, then a
draw if due. Through the frame port it called renderNow(), which on Cesium
only forced a draw, so flights stood still, drags and zooms did nothing
and the clock stopped. renderNow takes {ifDue: true}: one tick of the
loop as its own would run it, drawing only a frame that is due (the
widget's render() on Cesium; the stub's tick without a forced request).
A renderer plugin may supply applicationHooks(renderer) for what only its
renderer has (map engine, own credits, stale commands, QA handles). What every
renderer should do moves onto the contract: controls.keepEarthFramed (behind
the keepEarthFramed capability), query.occlusionTest (behind occlusionTest),
and panel drawing, which keepPanelRendering now does through resize and
frame.renderNow through the contract. renderNow throws when the frame fails to draw.
The Cesium port installs its zoom-out guard through keepEarthFramed (a setView
no longer cancels its turn) and answers occlusionTest with the scene's probe;
the stub answers it with a horizon test.
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
The frame port now does everything the contract asks of it on Cesium:
preUpdate says whether the tick draws (Cesium's own render test, read
live until the tick is over), holds are counted per reason, and suspend,
target fps, renderNow and diagnostics are real. Releasing the last hold
asks for one more frame.
whenSettled also waits until Cesium stops redrawing on its own. Each
request or worker task Cesium completes queues a redraw (a terrain
picker build after the camera moved, say), which no loading flag shows,
so it now waits for quiet frames and then a short stretch in which the
loop draws nothing by itself. It is bounded by its timeout, names a
stopped loop, and ends on destroy.
The app renderer still leaves out the members that steer the loop:
the render governor and the page's visibility handling own those
settings until they move onto the port.
The new frame.prediction check compares the preUpdate answer with what
each tick drew.
- claimPointer takes a grab filter, asked on each down: a lease takes
only the presses it grabs, and wheel, pinch and every other press stay
with the camera and everyone else. Each event of a press goes where its
down went, per button, so a claim never takes a press under way.
- The app owns the styles: effects.defineStyle passes a GLSL (and optionally
WGSL) full-screen pass, with the shader interface written out.
- Credits are plain data ({ text, href, logoUrl, inline }) that the app
renders; CreateOptions.creditContainer goes.
- controls.coast { drag, zoom } in seconds replaces the inertia trio; the
stub's defaults are the default renderer's, converted.
- The frame order is the default renderer's own: a move made by follow or
in preUpdate reaches changed on the next frame.
The renderer contract is what the application asks of a 3D renderer. It is nine ports
(frame, globe, draw, camera, query, input, effects, credits, quality) plus
the renderer itself, one strict .d.ts per port in src/render/contract/.
PORTS lists every member at run time, and a TypeScript-compiler test fails
when the list and the types disagree on one member. An optional member
exists only with its capability; a required one answers null or empty
without it. Nothing in the application uses the contract yet.
The stub renderer (src/render/stub/) implements every port in memory and
draws nothing. Its camera is a port of the default camera's maths: views,
lookAt, flights with their height arc and easing, rectangle framing on the
geodesic midpoint, the view rectangle with its horizon and pole cases,
changed thresholds, follows, and flights that finish inside the call.
The conformance suite (src/render/conformance/) runs 59 checks against
a renderer through the contract alone, in Node or in a browser page. The
camera checks compare traces recorded from Cesium's own Camera, headless on
a virtual clock (scripts/record-camera-goldens.mjs), to 1 mm, 1e-9 and
1e-3 px. The other checks cover listener rules on every subscription, the
frame loop, draw sets, picks, motion clocks, heights, leases, imagery,
styles, credits and quality knobs. The stub passes all of them but the
model check, which needs a glTF asset.
Reference scenes draw one scene per primitive family, a city and a
calibration path from orbit to the street, from contract calls only and
with no network. /dev/conformance/ draws them on the Cesium scene renderer
(src/render/cesium/sceneRenderer.js), records references through a
dev-server-only, loopback-only endpoint, and compares captures with
pixelmatch's antialias detection plus a solid-pixel count. Measured on
Cesium: every MSAA setting passes, and a dropped 4 px point, a dropped 2 px
line and a 1 px shift of the view fail. visual.js states the limits.
The package exports ./render/contract, ./render/stub and
./render/conformance. Documented in docs/RENDERER-CONTRACT.md,
docs/CODE-BOUNDARIES.md and docs/CURRENT-STATE.md.