Commit Graph
1447 Commits
Author SHA1 Message Date
Manjunath PaparajuandSameh Khamis e342149a09 Turn the first-run launcher into a three-step welcome
Replace the single dense welcome card with three short steps: an
introduction to the modes, where to start (Space Missions, Environmental
or Explore manually, Explore selected by default), then quick tips (the
place tip points at the search bar) and links. Next and Back keep the
selection, and only Enter God mode runs a mission; double clicks, Enter
repeats and clicks during a step change cannot launch one. Skip and ESC
close the card for the session, as before.

Drop the Live Contacts tile and the old voice tip. Space Missions
switches on its layer, which opens its own panel, so no first-run choice
enters a Context mode or opens the Context panel any more, and that path
is gone. The last step links to the repository and
Halfpixel's channels, each opening in a new tab without opener or
referrer. Its GEV Stories card closes the welcome and opens the in-app
Stories Explore view; the Stories announcement stays hidden, and unseen,
until the card has closed and Stories has loaded. The dim layer behind
the card is a click-through tint with no blur.

Update the 13 catalogs, CURRENT-STATE, the first-run QA harness and its
mutations, and the scripts that dismissed the old card. Add a changelog
fragment.

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 17:00:10 -08:00
Manjunath PaparajuandSameh Khamis 0a6fd5f43f Make Space Missions an ordinary layer with its own panel
Space Missions no longer runs as a Context mode. The launches layer owns
its Satellites dependency, including the rule that a Satellites off
asked for after Space Missions was switched on ends it (request order
decides), and a small controller connects the layer to its own panel and
store. Context no longer isolates, snapshots or restores Space Missions
or Satellites, so Contacts and Space Missions run together in either
order, and scene playback no longer exits an isolating mode. Settled by
the owner: Contacts leaves Satellites as it is, and only a person's or
voice Satellites off ends Space Missions; a scene, story, preset or
other programmatic off does not.

Turning the layer on by hand or by voice, choosing it at first run, or
picking a mission on the globe opens the Space Missions panel, and on a
phone its Missions sheet. Asking voice to open the panel while the layer
is off is refused with a reason, and voice never opens it while the
Cockpit owns the screen. With no Context mode on, a voice Context off
switches Space Missions off. A failed Satellites restore no longer cuts
the layer's teardown short. Mission labels on the globe select their
mission. The layer names a failed first index load itself, so the
Context toast no longer imports Space Missions code.

Also carries the satellites request ordering and
DataLayerManager.waitForLayerIdle, the share token for the panel, voice
panel ids, Cockpit folding the panel away and the phone tab ellipsis.
The panel shares the rail gutters and hover border of the other side
panels.

On top of the Omnibar: "open space missions panel" reaches the new
panel, and Open Context no longer answers to "missions".

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 16:03:51 -08:00
Manjunath PaparajuandSameh Khamis d68adcea21 Remove the Cyber HUD layout and keep its sonar as a visual style
Display > HUD > Sonar now turns the sonar sweep on over Tactical or
Minimal. It is off by default, ON reveals its five sliders, and it keeps
its guards: an OFF control, the sweep only while the HUD is visible and
outside Cockpit, no animation under reduced motion, and repaint timers
re-armed only after a drawn frame that still shows contacts.

The Cyber layout, its shell skin and its Cockpit lanes are removed. Share
links, scenes, saved views and set_hud that name Cyber open Tactical with
Sonar on; links and scene shots record Tactical with Sonar under the same
code, and a restored state that names another layout turns Sonar off.
set_cyber_sonar keeps its name and works under any layout. A newer Sonar
toggle or voice setting wins over a share-link restore that lands later.

From 1200px wide the command dock and World Timeline sit 74px above the
bottom edge, as in the Omnibar layout, leaving the bottom row to the map
attribution (left) and the Power Up corner row (right). The attribution
moves to the bottom right when the page runs right to left, where the
corner row sits at the bottom left, and a long credit line wraps upward
before reaching the corner row. The Tactical bottom-right readout sits
8px above Power Up and the coordinates start level with it. The World
Timeline is narrowed to sit between the corners. Toasts keep clear of
the raised dock and the chat and voice panel height budgets subtract its
rise. Below 1200px the layout is unchanged. The left rail treats the
centered World Timeline and voice control as obstacles only where they
reach a laid-out panel.

On top of the Omnibar: sonar.css replaces cyber.css after the Omnibar
imports, the Omnibar's HUD guide step now says Layout picks Tactical or
Minimal, and the Omnibar's Tactical bottom-right readout keeps the same
8px above Power Up.

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 15:47:27 -08:00
Sameh KhamisandManjunath Paparaju 24731951a0 Fly a looked-up place by its coordinates alone, and adopt the bar's files
A place row sent its name with its coordinates, and a name that matches a
city preset wins over them: "Paris, Texas" flew to Paris, France. Only the
coordinates go now. The bar's styles and dock tests join the format scope
and the bar its package.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 15:00:07 -08:00
Sameh KhamisandManjunath Paparaju b7a9fa1c21 Keep more private text from place suggestions, and name houses by their street
- Not sent any more: "john @Gmail.com" (a capital after "@"), "030 12345"
  and "Alice 12345-6789" (read as a house number and postcode),
  "access_token=abcdef", a key in quotes or brackets, and letter codes
  after a code label ("OTP: ABCDEF", "verification code ABCDEF").
- Sent now: "10 Downing Street SW1A2AA, London" (the comma hid the
  postcode). "Pin Oak" and "Gate Code Lane" stay places.
- A house Photon returns without a name is named by its number and street,
  so 10 and 12 Downing Street are two suggestions, not one "London".
- The same text asked twice at once is sent once.
- The village pack's build finds twins near the poles and across 180°;
  the shipped tiles are unchanged.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 14:45:05 -08:00
Sameh KhamisandManjunath Paparaju 8f577eb0c3 Adopt the line-reading tests into the format scope
Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 14:31:45 -08:00
Sameh Khamis e19c84bae4 Make the fleet models, their handover and the vessel sprites a public entry point 2026-11-18 13:12:13 -08:00
Sameh KhamisandManjunath Paparaju 88919f760f Keep a lookup's places when one tile fails, and ship every tile as its own file
- A tile that cannot be read is left out of placesNear's answer instead of
  failing it; without the pack's index the cities are still the answer.
- The build no longer inlines the small tiles into one chunk that loaded
  with the first lookup: all 732 are their own files.
- A row at latitude 90 or longitude 180 is tiled where the lookups read it.
- --min-population 0 is taken as 0, not as the default.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 12:36:16 -08:00
Manjunath PaparajuandSameh Khamis 78305411eb Bundle smaller Wikidata settlements for nearby-place lookups
137,662 places of 1,000 to 14,999 people that Wikidata gives a population
and coordinates for, none already in the cities pack, in 732 tiles of
5 x 5 degrees with an index of row counts (CC0). Nothing loads with the
app: a lookup reads the index once and then only the tiles it touches.
placesNear lists the places around a point, and findPlace finds a small
place by name near the view when no city of that name is near. The cities
build script writes the tiles with --tiles; the step from rows to files is
checked offline.

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 12:36:16 -08:00
Sameh KhamisandManjunath Paparaju c06aa37ce2 Keep the place suggester's fair-use and privacy promises
- One spacing, pause and cache for the whole tab, so a search box put up
  again does not start afresh.
- A failed request or a timeout pauses suggestions for a minute, as a
  refusal does.
- A number named as a card, a phone or an account keeps its digits
  together, so no address is read out of them; a UK postcode written
  without its space is a place, not a password.
- The docs say exactly what is sent.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 12:20:42 -08:00
German Khokhlov 7acc917ae0 Merge branch 'main' into exp/cctv-target-navigation 2026-11-18 17:39:59 +04:00
German Khokhlov 6e70793f66 Merge branch 'main' into exp/cctv-target-navigation
# Conflicts:
#	docs/CURRENT-STATE.md
#	src/layers/cctv/navigation.js
2026-11-18 16:36:41 +04:00
German Khokhlov 93b091d082 Merge branch 'main' into fix/i18n-installations-note
# Conflicts:
#	scripts/package-boundaries.json
#	src/layers/installations/controls.js
2026-11-18 16:35:52 +04:00
German Khokhlov e0437cfacb Merge branch 'main' into feat/australia-transit 2026-11-18 13:52:55 +04:00
Sameh Khamis 9554d6ea71 Serve the Data Library from any server, and let a server shape it (#1807)
A server can answer the library with createLibraryHandler, a fetch handler, and shape what it offers: hide entries (listed: false) or route browser-direct ones through itself (fetch: proxied). View-bounded entries ask for a grid-snapped box, and GeoParquet is read on the server within it. Applications can pass their own tile and data fetchers (createApplicationTools({library: {fetchTile, fetchData}})), and with library.requireCatalog a catalog that does not answer offers nothing and is asked again later. Tile paths have one spelling: integer z/x/y without leading zeros, within the grid and the entry's zooms. A server's index and partition reads are bounded and counted against its subrequest limit.
2026-11-17 23:34:00 -08:00
Sameh Khamis c1ca67bdb1 feat(places): export normalizeOsrmSteps from sources/places so any route proxy serves Directions' turn-by-turn steps 2026-11-17 21:05:20 -08:00
Sameh Khamis b9cbc42f20 Merge remote-tracking branch 'origin/main' into models/three-km-true-size
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-17 15:29:39 -08:00
Sameh Khamis a1bcce0f63 Merge remote-tracking branch 'origin/main' into sprites/kinds-history-live 2026-11-17 15:12:06 -08:00
Sameh Khamis 7186f720df Sprites for helicopters, ground vehicles, stations and vessel types; history to live without an empty map; model parts in Cesium
Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
2026-11-17 15:09:54 -08:00
German Khokhlov d7b38c8c62 Merge branch 'main' into feat/australia-transit
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-18 02:10:07 +04:00
Sameh Khamis 463946abfa Bring the tracking harness's cameras within 3 km of the planes it models
The tracked-model checks zoom the follow camera to within 2 km of the plane,
and the grounded-model check parks the camera 2 km above the planes instead
of 8 km, since models now draw only within 3 km.
2026-11-17 11:52:34 -08:00
Sameh Khamis 36624cd329 3D models only within 3 km of the camera, at true size
An aircraft, vessel, transit or rail vehicle now draws as its 3D model only
when it is within 3 km of the camera, and as its icon farther away. A model
already drawn is kept out to 3.6 km, so a vehicle on the edge does not flicker.
Proximity and All use the same distance and still differ by how many models
they allow (150 and 350). Models are drawn at their true size: the minimum
pixel size that inflated distant models is gone.

The camera altitude above which no model is considered is now the highest
aircraft the layers draw (30 km) plus the 3.6 km, so a camera high above the
ground still models an aircraft close to it. Cockpit's aircraft silhouettes
keep their own 150/185 km and 400/450 km bands, since they are icons.
2026-11-17 11:21:08 -08:00
German Khokhlov 0f5869fadd Merge remote-tracking branch 'origin/main' into german/zh-hant-generated 2026-11-17 19:44:56 +04:00
German Khokhlov b63205f69c i18n: tighten the zh-Hant check and test its command line
- Without opencc-js the zh-Hant check says to run npm ci, and the other
  checks still run.
- --prune handles zh-CN before zh-Hant: shippedLocales() sorts, since
  git lists untracked catalogs first.
- A key missing from zh-Hant is reported once, with "run npm run i18n --
  --zh-hant" when zh-CN has it; a zh-Hant entry still in English points
  to zh-CN and same-as-english.json.
- 並道 -> 併道 applies only to entries whose English key says merge, so
  并 (and) before 道路 or 道謝 stays 並.
- Two more corrections for strings main has added: 箇中 -> 個中 after a
  count (全部 {n} 個中), and 宣佈 -> 宣布 like 發佈 and 公佈.
- zh-hant-cli.test.mjs runs the command in a throwaway repository, with
  opencc-js linked as a junction, so Windows needs no symlink privilege.

zh-Hant.json does not change.
2026-11-17 19:44:49 +04:00
Sameh KhamisandManjunath Paparaju 3a0842c103 Draw the card previews through the renderer, and show vessel photos too
- The route globe, turning model and cockpit view are the renderer's: the
  Cesium plugin hands them over as its `cardPreviews` application hook
  (src/render/cesium/cardPreviews.js), and the card's tiles keep only the
  words, figures and HUD laid over them. Nothing in the UI reaches Cesium,
  and a renderer without the hook leaves the card its photo and figures.
- The turning model is the fleet model the globe draws for the aircraft's
  type, from the set loaded at startup, so opening a card fetches nothing.
  The flights layer's record now carries the type code and emitter category
  that pick it.
- The photo comes from the item's own layer: the flights layer's
  Planespotters photo for the plane it tracks, and the vessels layer's Open
  Vessel Photos photo for the vessel selected, with its credit. It no longer
  waits for Contacts to follow the same aircraft.
- The satellite models are left out: the card shows a satellite's ground
  view and graphs its altitude and speed.
- The route globe's airport codes are drawn into its own small scene, the
  compass reads its course in the active language, the callouts no longer
  speak to screen readers every six seconds, and figures use the app's
  number format. Esri's tile address and credit live in one place.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-16 15:44:35 -08:00
Sameh KhamisandManjunath Paparaju 2209810cdd Carry Context's package and same-as-English entries onto the latest main
Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-16 15:02:31 -08:00
Sameh Khamis 56bd14d5f2 Merge remote-tracking branch 'origin/main' into stories/gev-stories 2026-11-16 14:28:09 -08:00
Sameh Khamis 0ed6cde956 Idle frame rate in the app, timed line batching, KEY REQUIRED status
Three fixes to how the globe draws and reports loading.

**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.

**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.

**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.

Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
2026-11-16 14:10:01 -08:00
Sameh Khamis 1f6fc86c1a QA: Play on a paused story link goes on from its time 2026-11-16 13:41:09 -08:00
Sameh Khamis 0a39b05cdb Authoring: pick any scene again, and select the first scene on load
Restores the scene picker and its selection on load, after a delete and
after an import, so PLAY and NEXT work after a reload. Open in GEV
selecting a shot and NEW SCENE stay as they are.
2026-11-16 13:30:22 -08:00
Manjunath fec84dbf78 Address Stories review feedback 2026-11-16 22:35:07 +05:30
Manjunath 9e9ce1db22 Fix Stories navigation, sharing, and voice entry 2026-11-16 20:12:10 +05:30
Manjunath 5418438339 Stories: GEV scenes as stories on the live globe
A Stories button (top right) opens Explore: a feed of GEV scenes over
GEV's own Cesium globe, with a pin per story. Explore opens at country
level over the first story and, while idle, flies on from story to story
for a minute. A picked story is framed in the middle of the view; a pin
plays its story on a second click. The Story page plays the scene through
SceneDirector with a timeline, chapters, key moments, sources and
background, then Close (or Back) puts the person's camera, clock, layers,
style and AUTHORING selection back. Open in GEV hands the scene to the
Scenes panel at its current shot.

Stories lists the scenes GEV ships with a camera path (while they are in
the project), the scenes saved with SAVE TO STORIES in AUTHORING, and the
person's other scenes as drafts. The person's own stories live in the
project on this device, so they have no Share; a link to a story that is
not here opens Explore and says so. Each shipped story's
context comes from what GEV knows: what it shows, the place each shot goes,
and each layer's data sources as DATA_SOURCES.md lists them; the Nepal
story carries the event pack's facts and CC BY-NC sources. Card images are
a captured THUMBNAIL or drawn from the keyless Esri World Imagery.

AUTHORING has no scene picker: it starts with no scene, NEW SCENE (or
CAPTURE SHOT) makes one, and Stories' Open in GEV selects one. Before SAVE
TO STORIES it offers topic tags and THUMBNAIL. A scene's stories flag,
storyThumb and storyTags are saved with the project and kept through
export and import.

Only the closed state loads with the page; the screens, styles, story data
and controller load on first open. Stories keeps its place in the query
(one history entry per screen) and holds the share link's hash writes
while open. Keyboard input and voice tools stay with Stories while it is
open. Explore's pins move on every drawn frame without asking for frames;
the idle tour and tile settling are bounded.

All strings are translated in the 13 locales.
2026-11-16 20:12:10 +05:30
Sameh Khamis a7fe3eebc6 Credits keep their linked words: only the words a source linked are the link
A credit read from markup keeps the first link's own words as linkText, and the Cesium credit display and the credit line link just those words, as the source wrote them (Street Level's "© Mapillary contributors" links Mapillary only). The Street Level gate reads a drawn item's pick id from its draw-set id.
2026-11-15 20:12:14 -08:00
Sameh Khamis 0ab31d4fb8 The renderer seam: clicks go to the newest tool, recession and display groups through the contract, drawing at parity with Cesium
- Clicks: when two tools want the globe's clicks, the newest takes them and the older is told and turns itself off; a click is decided when it arrives, and ambient selection fires only when no tool holds the pointer. The "map is busy" paths and their strings are removed.
- Recession: the limb fade is shared (src/render/recession.js) and reaches icon and model sets through SetSpec.recede; tuning applies on the next frame.
- Display panel groups are published through src/ui/displayGroups.js; the Weather group and src/viewWeather.js are removed.
- Draw port: a set whose icons only move is moved in place, and models that did not change are not restyled each frame, so moving fleets cost what they did when drawn directly; an untinted, fully opaque model is drawn without a colour.
- Conformance: input.lease.lost checks the new lease inside onLost and reports a throwing onLost; draw.sets.recede covers model sets.
- QA scripts read the renderer host instead of internals the seam replaced.
2026-11-15 17:03:09 -08:00
Sameh Khamis a0d299523d Merge main (663b56f62, #1755) into the renderer branch 2026-11-15 16:34:05 -08:00
Sameh Khamis d49552af57 Merge remote-tracking branch 'origin/main' into flights/course-from-fixes
# Conflicts:
#	docs/CURRENT-STATE.md
#	scripts/package-boundaries.json
2026-11-15 11:26:28 -08:00
Sameh Khamis fc4db81d0b Course from fixes only moves forward in time, from an anchor fix, and not for a standing contact; military contacts too
A fix that is not a second newer (a repeat, or an older position from another
feed) never gives a course, so a source switch cannot turn an aircraft
around. The course runs from an anchor fix that moves only when a course is
read, so frequent short steps add up, and a contact reported under 2 m/s
reads none. The helper moves to src/data/courseFromFixes.js and the military
records use it as well.
2026-11-15 11:19:58 -08:00
Sameh Khamis 4b47d5e058 Merge main (8d9c9071, #1750) into the renderer branch
Main brings satellites and vessels moving every frame, smooth rewind for
contacts, global clouds drawn to the level a feed names, and search for
degrees-minutes-seconds, UTM, MGRS and plus codes. They keep this branch's
renderer work: satellites write their reckoned positions into the points set
once a frame; vessels move every frame and ask for frames from the camera pose
and canvas, and a vessel not there yet is hidden through its icon; flights and
military keep the branch's rendering, with main's timeline fixes, trail top-up
and grounded lift; the cloud tiles keep their infrared transfer. The timeline
history module uses the geo helpers instead of Cesium, and main's new tests
use the draw port's items.
2026-11-15 11:00:24 -08:00
Sameh Khamis 30cc22fbef Own src/time/frameWait.js in the packages that import it 2026-11-15 10:48:37 -08:00
Sameh Khamis 101b92f088 Merge branch 'main' into gnss/h3-cells 2026-11-15 10:30:31 -08:00
Sameh Khamis 317d06adf6 GNSS Integrity on H3 resolution-4 hexagons, as gpsjam.org
Aircraft are binned into H3 resolution-4 cells (h3-js) and each cell is
drawn as its hexagon instead of a 0.5 degree square. As on gpsjam.org,
every hexagon with an aircraft is shown: the three-aircraft minimum is
gone, and discounting one bad aircraft is the only small-sample guard.
Cells are keyed by their H3 index and carry their centre and boundary.
2026-11-15 10:19:59 -08:00
Sameh Khamis b952ca0e1c Merge branch 'main' into search/coordinate-formats 2026-11-15 09:59:44 -08:00
Sameh Khamis 4a61c755d9 Search reads degrees-minutes-seconds, UTM, MGRS and plus codes 2026-11-15 09:41:01 -08:00
Sameh Khamis 2b5fb51684 Contacts move back as smoothly as they move on
A snapshot timeline may declare spanMs: each record of a snapshot at a
time then carries its own fixes from spanMs before the time to spanMs
after it. Flights, military flights and vessels following the clock are
placed on those fixes, so a seek or a move back within the fixes loaded
is no jump: nothing is cleared and play does not wait. The step there is
asked for once and stands in for every contact; those it has keep their
place. Fixes are merged across snapshots at least 20 s apart, at most
240 a contact, and a contact is not drawn more than a minute before its
first fix.
2026-11-15 09:27:31 -08:00
Sameh Khamis e31de29ccc Move satellites every frame between SGP4 samples
Satellite points were propagated once a second and held still in between,
so while the world clock plays faster than real time they jumped: at
1 min/s, about 45 px once a second at globe scale.

Each SGP4 call now keeps a sample of the satellite's inertial position,
velocity, gravity and its rate of change (src/layers/satellites/motion.js).
Every frame each shown point is reckoned from its sample to the world time
and turned into the Earth-fixed frame by the sidereal angle, so points
glide at any play speed. Core satellites still take a fresh sample every
second, and at once when the world time is 30 s from it (fast play, a
seek), which keeps every point within about 10 m of SGP4. Starlink extras
take their first sample as they load and are resampled round-robin, more
per frame the faster time plays (up to 2,000 a frame); a point more than
two minutes from its sample waits for the next one. Hidden points are
moved when shown again, and the tracked satellite keeps its per-frame path.

Measured at globe scale: at 1 min/s points move on every frame, 0.4 px a
frame and at most 1.4 px (before: once a second, 45 px). With 11,880
satellites (Starlink on) the scene holds 60 fps, frames 16.7 ms median and
19.7 ms p95; reckoning costs 0.02 ms a frame for 1,342 points.
2026-11-14 23:18:28 -08:00
Sameh Khamis 0ecbfbecd0 Merge main (e4708a81, #1745) into the renderer branch
Main brings the reviewed one-time-control and timeline-mark changes. They
keep this branch's renderer work: earthquakes draw through the draw port and
register their strong quakes as marks; the weather clock keeps `follows` beside
`world`; the weather layer measures ages and delays from the timeline time;
the Visual panel keeps its sky and weather groups under Effects. Tests that
moved time through the weather clock now move it on the world clock.
2026-11-14 22:08:39 -08:00
Sameh Khamis 961e6321a5 Take the timeline commits back out before merging their reviewed versions from main
5150279cc, 97bd61711, 900c76425 and 4f23ad330 went to main, reviewed and
changed, as #1745. They are taken out here so main brings them in as
merged, rather than as two copies of the same changes in conflict.
2026-11-14 21:52:58 -08:00
Sameh Khamis 7cb854c923 The timeline marks launches and strong earthquakes, not every weather frame
The timeline drew a tick for every registered mark, and the weather clock
registered every radar, satellite and lightning frame, which come every few
minutes, so the track was a wall of dashes and the arrow keys crept from
frame to frame.

Weather products now register only the span of their frames (start and
end, as before) with no marks. Holds, the gate and the next-frame wait
while the world plays are unchanged. A weather row's step param goes to
the previous or next weather frame (every shown product's frames, and the
row's own while it is suspended) rather than to the timeline's marks.

The Earthquakes layer registers with the world clock once, at init, and
unregisters on destroy. While on, its quakes of magnitude 6 and up
(EARTHQUAKE_MARK_MAGNITUDE) are marks, and its coverage is their own span,
or none without any, so it never stretches the timeline beyond the feed.
Off, it has none. It tells the clock when the set of marks changes. The
map still draws every M2.5+ quake.

Launches stay marks. With no mark ahead or behind, the arrow keys step
along the track as shown.
2026-11-14 20:28:56 -08:00
Sameh Khamis 3cfd414e70 The main timeline is the only time control; the Weather panel shows its frame time
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.

The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.

A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
2026-11-14 20:25:31 -08:00