Review of #974 (asturksever):
- After a 429 the other tiles of the view, and the fetches queued behind the
first, still went to Mapillary. The proxy now answers 429 itself until the
wait is over, scoped to the token that was refused.
- A Retry-After sent as an HTTP date read as 60 s; it is now the seconds
left, with the same 10-minute cap.
- A body that failed to trim (up to the 48 MiB cap) could fill the 120-entry
cache; anything over 4 MiB is served but not kept.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
main grew the Street Level provider registry while this branch removed it
(#982–#985: injected providers, an empty composition, the `r` switch field).
The registry, params, uiState and pick router come back as main has them and
the slimmed layer sits behind the provider contract:
- The core (index.js) drives providers as on main, without surface modes,
ground casting, FOLLOW, prewarm and nearest-image lookups. A provider's key
status is asked with a 10 s timeout and asked again on a switch-on while no
key is known.
- Mapillary is mapillaryProvider.js over the slim coverage, sequences and
viewer modules, which read the filter and the active flag from the provider
context.
- The viewer host mounts one provider adapter at a time, no prewarm.
- The panel has a chip per provider again (the pill switches the layer);
no legend, EXPAND stays the Fullscreen API.
- The contract drops what no provider implements: groundCaster, meshSampler,
getSurface/setSurface, nearestImage, prewarm, reportError, the legend and
surface fields of the UI snapshot.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- No pointer cursor over coverage lines (no other layer has one); a click
test replaces the hover tests.
- No legend: one source, one colour.
- The on-globe credit lives in index.js; credits.js is gone.
- Billboard glyphs are SVG data URLs with the same geometry, so tests need
no canvas stub.
- The tile cache keeps the 120 most recently used tiles, same 24 h TTL,
instead of a byte budget; listTileLayers was test-only.
- providers/mapillary/ is flattened into the layer and its policy merged
into one policy.js; the source's method list is a literal in the catalog.
- One fakeCesiumViewer for the layer tests.
- The fixture gate keeps the steps the unit tests do not cover: coverage and
credit, a rejected key, line -> cone -> photo, close, a keyless page.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
A client drops the tiles a camera move leaves behind; their fetches no
longer run on or hold the six upstream slots ahead of the tiles in view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Three regressions from the slimming, found in review:
- Clean View, recording and the cockpit hid the old expanded viewer with
CSS; native fullscreen sits above all of that, so the photo stayed over the
globe (and in recordings). While expanded, the panel now watches the
<body> classes of those modes and leaves full screen when one starts.
- iPhone Safari has no element fullscreen, so EXPAND had disappeared there.
Where requestFullscreen is missing but popovers exist, EXPAND opens the
viewer as a top-layer popover sized to the viewport (it stays in the
panel's DOM; the popover attribute is set only while open, since a closed
popover is hidden). Checked in Chrome: the popover fills the viewport over
the panel's backdrop filter.
- Without the provider chips, a layer that was on with Mapillary switched off
by a share link or tool (`0.m.0`) showed ON and drew nothing. The pill now
reads OFF with a hint, and pressing it brings Mapillary back without
switching the layer off.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The browser gate is one pass over the remaining flows: rail strip and
expand, coverage with fixtures, the ON/OFF pill, 360° and SINCE filters,
KEY REJECTED, nearest photo with caption, × close, phone fit, keyless
KEY REQUIRED on a second page and no page errors. Panel controls are
pressed through the DOM; pick-point search, line/cone clicks, the
framing-cancel, reload/share and status-route probes, the second
viewport and pointer-settling retries are gone (unit tests cover them).
Tests that pinned constants, copy, CSS or source text, or repeated
another test, are removed or merged. CSS loses an unused variable and
duplicate rules. Docs describe the slimmed feature; unused exports and
the layer's dead setCoverageFilter/refreshCoverage surface are removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Drop the disk tile cache (.gev-cache/mapillary/tiles, background sweep,
size cap, legacy retrim), the server-side 401/403/429 holds, the upstream
concurrency semaphore and per-waiter abort bookkeeping. The client already
pauses on 429 and stops on a rejected key.
Keep: server-side token, {configured}-only status, strict coverage path
validation (z11-14), image-layer trimming, same-site gate and per-IP limit,
HTTPS redirect pinning to the tile origin, the streamed size cap, the error
mapping the client reads, a 24 h byte-budget LRU memory cache, in-flight
coalescing via the shared coalesceProxyRequest, and browser Cache-Control.
Routes and constants fold into mapillary.js and mapillary/tiles.js.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer now owns its Mapillary parts directly: the provider registry,
pick router, multi-provider UI summary, params codec helper and provider
context are gone. createStreetLevelLayer({ source }) builds coverage,
sequences, the nearest-image lookup and the MapillaryJS viewer itself; a
single providerOn switch keeps the share link's `mapillary` option (off
draws nothing), and getParams/setParams keep { mapillary, pano, sinceDays }.
No z0-5 overview points: above 60 km nothing is drawn and the panel says to
zoom in; the proxy now serves only coverage z11-14. Tiles come from the
visible ground within range of the camera, ranked from the ground under it
(no line-of-sight ranking or near-range padding). MapillaryJS loads on the
first photo; viewer prewarm is removed. Key status, a rejected key and a
rate limit share one `blocked` state on coverage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
FOLLOW is gone: no setFollow, follow state, map-stack availability or
handoff listener. Opening a photo still frames it with one flight through
the application's deferred navigation (begin/reassert), so a slow photo
never overrides newer navigation and tracking is released as before.
Ground casting is gone: groundCast.js, meshSampler.js, the surface mode,
the draped-to-cast swap and remesh. Coverage lines are always draped
GroundPolylinePrimitives (ClassificationType.BOTH); cones and the marker
clamp to the ground and keep the horizon cull. The terrain/meshFloor/ground
services and meshFloor.visibleTilesetLoaded are no longer needed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
EXPAND now uses the browser's Fullscreen API on the viewer element, which
stays in the panel; the hand-built modal (re-parenting to <body>, inert
siblings, focus trap, document-level Esc/Tab, Clean View/recording/cockpit
hide rules) is gone. The button is hidden where the API is missing.
The FOLLOW button and the PROVIDERS chip row are removed. The header pill is
the only layer switch and re-enables a provider switched off elsewhere; under
KEY REQUIRED the error line says which key to add. Chip colour support in
chipGroup, dead CSS and tests pinning the removed behaviour go with them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PR #768 bundled a portable-panel windowing system with the Street Level
layer. Remove it so CCTV and Street Level are ordinary docked right-rail
panels again, as on main before the merge.
Removed:
- header drag to float, 8-way edge/corner resize, double-press snap-back,
dockOnCollapse, command-dock clearance, float hint toast, floating z floor,
persisted floating geometry and ResizeObserver re-clamping
(panelPositionControls.js restored to its pre-#768 version)
- src/ui/panelResize.js and its tests, panelDock.test.mjs
- onPanelResized/dockPanel wiring in PanelChrome, the application shell and
StreetLevelControls (EXPAND/SHRINK no longer docks)
- :not(.panel-floating) guards and .panel-floating/.panel-portable/resize CSS
- qa:panel-resize, qa-panel-resize.mjs, qa-panelDrag.mjs, their tests, the
CI "Portable panel gate" step, QA_FAIL_ON_RETRY, and the Street Level
gate's float/resize/dock steps
- floating-panel docs in README, CHANGELOG, CURRENT-STATE, KNOWN-ISSUES
Kept: the Street Level panel as a docked rail panel (share/cockpit/rail
lists, layout controller, rail and Cyber CSS, EXPAND viewer), and the
independent right-rail alignment fix (settledLeftRailTop, 9dde7b4).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A photo takes a deferred navigation ticket when it starts opening
(begin/reassert, the application's _beginDeferredNavigation and
_reassertNavigationHandoff) and frames only if that ticket still owns
the camera once loaded, so a slow photo no longer flies the camera back
over newer navigation or clears newer aircraft tracking.
- A failed mesh refresh keeps the last good sample and the distance it was
taken from, and is retried after the miss cooldown, instead of recording
the failed distance and never refreshing again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Photo framing and FOLLOW claim the camera through the application's
navigation, injected with attachNavigation({ run, subscribeHandoff }):
aircraft and satellite tracking is released first, the cockpit refuses,
and FOLLOW stops when another feature takes the camera. No UI imports
in the layer.
- The mesh sampler follows the mesh floor's rules: it waits for the
visible tileset to finish streaming (visibleTilesetLoaded, now exposed
by the mesh floor service), needs a real bare-earth prior and keeps to
the shared meshFloorSampleWithinPrior window, which cameraFollow now
uses too. A cell is probed again once the camera is half as far from
it (down to 40 m), so a coarse early sample is replaced and redrawn.
- The MCP globe panel's CSP allows the Mapillary Graph API and its image
CDN (https://*.xx.fbcdn.net).
- The tile proxy reads bodies with the shared readResponseBytesCapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
