A place search or fly-to stops satellite tracking with the tool origin,
which the saved Satellites state did not take in, so a satellite tracked
by voice during the mission was tracked again when Space Missions ended.
The saved state now takes in every deliberate Satellites setting (person,
voice or tool), as the layer state does.
Co-authored-by: Manjunath Paparaju <[email protected]>
A setting such as "show orbits" changed by the person or by voice while
Space Missions keeps the Satellites state from before it (while it runs, or
after a restore that found Satellites busy) was overwritten when the mission
ended. It is now kept in that saved state, as their visibility choice is.
Co-authored-by: Manjunath Paparaju <[email protected]>
A saved Satellites state kept by a busy restore could still carry the mark
of a Satellites switch the person made after it, which tells the restore to
leave Satellites as it is. Space Missions turned on again kept that mark,
so turning it off left Satellites on when it had been off. The next mission
now saves Satellites as it is when it starts in that case.
Co-authored-by: Manjunath Paparaju <[email protected]>
ALPR, News, Wildlife Sightings, Fire Perimeters, GhostMaps and Drone
Airspace each skip their own card or overlay hit test when a painted label
took the click. Each now has a test that a click the label took does not
select the camera or sighting, open the report, or open the card's link,
and lets go of the current selection, while the same click off the label
still acts. ALPR's presentation gets its first test file.
Co-authored-by: Manjunath Paparaju <[email protected]>
A restore that found Satellites still busy keeps the saved state, and the
next Space Missions start then skipped switching Satellites on, so it came
up with no satellites. It now keeps that saved state (still the one from
before the mission) and switches Satellites on for the mission again.
Co-authored-by: Manjunath Paparaju <[email protected]>
A click on a Space Missions label reaches every click subscriber so they can
let go of their selection, but the layers that test their own painted cards
or pick the scene themselves still found what lay under the label: CCTV
turned that camera on, FIRMS and Vessels selected and flew to theirs, News
and Wildlife Sightings opened their item, Perimeters, Ghost Maps and
Shipwrecks opened the card's link, ALPR selected its reader, and Local ADS-B
drilled the scene itself and selected the aircraft. Each now skips its own
test on such a click, and Local ADS-B drills through the click, so the click
only releases selections, as a click on empty map or another layer's
contact does. Ordinary clicks behave as before.
Co-authored-by: Manjunath Paparaju <[email protected]>
While Space Missions was going off (its Satellites restore still running,
the panel still shown), hovering or keyboard-focusing a roster row still
scheduled the roster preview, which flew the camera to that launch with
nothing left to end it. The preview is no longer scheduled once the layer
is going off, and one already pending is dropped. Selection, focus, replay
and stepping from the Data Layers row were already refused then.
Co-authored-by: Manjunath Paparaju <[email protected]>
A click a painted overlay handled, such as a Space Missions label, returned
before any click subscriber ran, so the layers that close their cards or let
go of their selection on a click never heard it. Now only the picking the
label replaces is skipped: subscribers still hear the click, marked as an
overlay click whose hit is the label (no draw set, no id, nothing drilled),
and the geometry beneath it is not picked.
Co-authored-by: Manjunath Paparaju <[email protected]>
When Satellites had not settled within the 30 s limit, turning Space Missions
off cleared the saved Satellites state and put the parameters back before
failing, so Satellites stayed on as Space Missions had switched it with
nothing left to retry. Now a busy Satellites layer is left untouched and the
saved state is kept, so turning Space Missions off again finishes the
restore. A Satellites action the person took still gets its parameters back.
Co-authored-by: Manjunath Paparaju <[email protected]>
From review:
- Voice "open the Space Missions panel" under the Cockpit opened it and
wrote its preference; it is refused there now, as the layer's own reveal
is. On a phone the panel's Missions sheet shows too.
- A voice "context off" switches Space Missions off only when no Context
mode is on, entering or starting (Contacts), and it also reaches Space
Missions while the layer is still starting.
- While the layer is going off (its Satellites restore may still run) a
roster click, focus or replay does nothing.
- Stepping missions from the Data Layers row opens the panel, as a globe
pick does.
- SHARE-LINK-FORMAT lists panel 11, space-missions-panel (token n).
Co-authored-by: Manjunath Paparaju <[email protected]>
Space Missions no longer runs as a Context mode. The launches layer owns
its Satellites dependency, including the rule that a Satellites off
asked for after Space Missions was switched on ends it (request order
decides), and a small controller connects the layer to its own panel and
store. Context no longer isolates, snapshots or restores Space Missions
or Satellites, so Contacts and Space Missions run together in either
order, and scene playback no longer exits an isolating mode. Settled by
the owner: Contacts leaves Satellites as it is, and only a person's or
voice Satellites off ends Space Missions; a scene, story, preset or
other programmatic off does not.
Turning the layer on by hand or by voice, choosing it at first run, or
picking a mission on the globe opens the Space Missions panel, and on a
phone its Missions sheet. Asking voice to open the panel while the layer
is off is refused with a reason, and voice never opens it while the
Cockpit owns the screen. With no Context mode on, a voice Context off
switches Space Missions off. A failed Satellites restore no longer cuts
the layer's teardown short. Mission labels on the globe select their
mission. The layer names a failed first index load itself, so the
Context toast no longer imports Space Missions code.
Also carries the satellites request ordering and
DataLayerManager.waitForLayerIdle, the share token for the panel, voice
panel ids, Cockpit folding the panel away and the phone tab ellipsis.
The panel shares the rail gutters and hover border of the other side
panels.
On top of the Omnibar: "open space missions panel" reaches the new
panel, and Open Context no longer answers to "missions".
Co-authored-by: Sameh Khamis <[email protected]>
Display > HUD > Sonar now turns the sonar sweep on over Tactical or
Minimal. It is off by default, ON reveals its five sliders, and it keeps
its guards: an OFF control, the sweep only while the HUD is visible and
outside Cockpit, no animation under reduced motion, and repaint timers
re-armed only after a drawn frame that still shows contacts.
The Cyber layout, its shell skin and its Cockpit lanes are removed. Share
links, scenes, saved views and set_hud that name Cyber open Tactical with
Sonar on; links and scene shots record Tactical with Sonar under the same
code, and a restored state that names another layout turns Sonar off.
set_cyber_sonar keeps its name and works under any layout. A newer Sonar
toggle or voice setting wins over a share-link restore that lands later.
From 1200px wide the command dock and World Timeline sit 74px above the
bottom edge, as in the Omnibar layout, leaving the bottom row to the map
attribution (left) and the Power Up corner row (right). The attribution
moves to the bottom right when the page runs right to left, where the
corner row sits at the bottom left, and a long credit line wraps upward
before reaching the corner row. The Tactical bottom-right readout sits
8px above Power Up and the coordinates start level with it. The World
Timeline is narrowed to sit between the corners. Toasts keep clear of
the raised dock and the chat and voice panel height budgets subtract its
rise. Below 1200px the layout is unchanged. The left rail treats the
centered World Timeline and voice control as obstacles only where they
reach a laid-out panel.
On top of the Omnibar: sonar.css replaces cyber.css after the Omnibar
imports, the Omnibar's HUD guide step now says Layout picks Tactical or
Minimal, and the Omnibar's Tactical bottom-right readout keeps the same
8px above Power Up.
Co-authored-by: Sameh Khamis <[email protected]>
The fire layer module exports filterFires and DEFAULT_FIRE_FILTER, the filter its markers use, so an application drawing the same detections another way hides the same fires.
- A clock correction starts a new epoch, and playback may first draw its
second report. The turn point now resets on a new epoch as well as on a
break, so a standing train no longer turns around after a correction.
- recallDirection and earlierFixes are gone: comparing each earlier report
with the newest turned a standing train on GPS jitter. A train bound when
its line arrives late shows no direction until it has moved 15 m.
- Tests share reportDirections, iconOf and the playback helper.
- Comments and CURRENT-STATE match the code.
- GPS jitter under 15 m at a standing train no longer turns it, in reports
and in playback; a reversal needs at least 15 m of movement.
- A standing train keeps its operator's last bearing through reports that
leave it out.
- Playback resets its turn point at a break, so a jump to a corrected
position is not a reversal.
- A train bound while its line is still loading takes its direction from
the movement it already made.
- A vehicle in view that leaves a Transit hold goes on from its own clock
instead of rewinding.
- Tests cover the 15 m boundary, the late line, the hold release and the
icon after Transit is turned back on; duplicate jitter tests are merged.
- FOLLOW_MIN_MOVE_M is gone; comments and CURRENT-STATE match the code.
- A train first seen standing takes its direction from the operator's
course, not from a course drawn out of GPS jitter.
- Moving a hold to another vehicle releases the first one the same way as
ending the hold.
- repaint always goes through placeSample, which hides the held vehicle and
puts it on its current segment, so setShown is no longer exported.
- Tests cover the icon right after a hold, a segment with one known floor,
a known floor at 0 m and selection by click after the layer comes back;
shared helpers replace repeated setup.
- Comments, CURRENT-STATE and the release note say what the code does
without internal figures.
The direction now follows how far a train has come back from the farthest
point it reached, so a slow reversal of under 15 m per report still turns it,
while GPS jitter around one spot does not. Rail policy takes the 15 m figure
from pathBinding instead of repeating it.
Above the height stations draw at, the layer only said "Fly below 48 km to
a covered city" without showing which cities those are. Every system in
the registry now has a marker there: a green, white-ringed dot over its
city, 5 km up so terrain never hides it, shown only while the layer is on
and stations are not drawn.
Clicking a marker flies straight down into its city from 20 km, as an
explicit camera action through the shell's runNavigation, like News and
the weather layers. The markers belong to the layer for picking.
A landing is judged by its height above the ground, which the drawn
height alone does not give at a high airport. Records keep the ground
the warm cache already reads (the surface a grounded contact stands on,
the floor under a low contact near the view or tracked) as groundM, in
the render height's reference, and observeLiveAircraft passes it on; NaN
where the layer does not know it.
A feed's ZVEH type held for any contact, so a test transponder at 77 m/s
drew as a car driving at airliner speed and a drone at 762 m as a car in
the air; a GRND station reporting 11,880 m drew as a mast in the sky.
ZVEH now holds only for a contact reported on the ground (or with no
altitude) at up to 40 m/s; anything else is classed as an aircraft. A
GRND station stands on the ground whatever height it reports.
A tracked aircraft's icon and 3D model keep the colours they have
untracked in Flights and Military Flights (no cyan, no lighter amber);
only the icon's alpha changes (stale fade, clear while its model draws).
A selected vessel or aid keeps its type colour instead of white, and a
tracked satellite's dot keeps its class colour instead of yellow. An
emergency stays red while tracked.
A civil aircraft was drawn as an airliner until its type lookup answered,
even when its feed already named the type: a helicopter showed the
airliner icon and model for as long as the lookup took.
- Flights classes every contact, and picks its model, by the feed's own
ICAO type designator from the first fix. A looked-up type replaces it
once the lookup answers and outranks the feed's on every later poll;
the lookup still runs and fills the type name and registration.
- A surface emitter category still keeps only a ground type (ZVEH, GRND)
from the feed.
- State vectors have no type field, so an /api/flights answer may send
`typeByIcao` beside them, by ICAO address, as `emergencyByIcao` is sent.
The regional adsb.lol fallback now sends it from each row's `t`.
When an application places live contacts itself, the tracked trail was cut at the layer's own delayed clock, which can run minutes behind the placed aircraft: the trail ended far behind the aircraft, and its head was dropped while that clock warmed up. The trail now reads the aircraft's time off its own reports at the point where it is drawn, for Flights and Military Flights.
A host-supplied placement's speed is how fast the marker is drawn. While it
waits for its fixes to catch up it stands still at 0, so tracked-aircraft
panels and the cockpit readout showed 0 m/s for an aircraft in flight.
displayedKinematics now takes derivedFromPlacement: when the drawn speed is a
placement's, the reported ground speed is shown, and the placement's only when
nothing is reported. The placement speed still drives motion and dead
reckoning. Civil and military tracked descriptors pass it from the new
_drSpeedPlaced scratch, which placeLiveAircraft sets.
Turning vessels on returned what the first live poll answered, so a
failing feed (such as a missing AIS key) made enable() resolve false and
the layer reported it could not be turned on. loadLivePositions again
resolves with nothing once the poll is done; going back to live reads the
poll's answer through its own path.
Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
A selected plane is drawn by its own model, and its fleet model was let go once
that model drew. Deselecting showed the icon at once, and the icon stayed for
about a second while a new fleet model loaded.
The fleet model now stays loaded but hidden while the plane is selected, kept
where the plane is. Deselecting hands the plane back to it in the same frame,
and the icon shows only when there is no loaded fleet model. Military aircraft
share this code. Vessels never swap models on selection, so they had no flash.
An aircraft, vessel, transit or rail vehicle now draws as its 3D model only
when it is within 3 km of the camera, and as its icon farther away. A model
already drawn is kept out to 3.6 km, so a vehicle on the edge does not flicker.
Proximity and All use the same distance and still differ by how many models
they allow (150 and 350). Models are drawn at their true size: the minimum
pixel size that inflated distant models is gone.
The camera altitude above which no model is considered is now the highest
aircraft the layers draw (30 km) plus the 3.6 km, so a camera high above the
ground still models an aircraft close to it. Cockpit's aircraft silhouettes
keep their own 150/185 km and 400/450 km bands, since they are icons.
- railHeightM is null while the train is drawn on the ellipsoid (floor
quality 0) instead of -1.5 m, so a view waits for the surface.
- An arc step between two reports tells which way a train runs only above
15 m, the layer's parked-train jitter (FOLLOW_MIN_MOVE_M). GPS jitter of
a standing train no longer flips the direction through the playback
segments, which turned a ride 180 degrees every poll.
- drawDirection, a copy of direction, becomes a directionPlayed flag.