- Route the adsb.lol GNSS source through createReferenceSources and the
constructCatalog contract; app layer module is a thin pass-through.
- Describe the method honestly: gpsjam.org's published cell formula and
bands; per-aircraft thresholds are the 14 CFR 91.227(c) ADS-B Out minima
(NIC < 7, NACp < 8) plus readsb gpsOkBefore.
- Proxy: reuse the adsb.lol anchor parser, honour upstream Retry-After
(clamped 5-120 s), serve stale during cooldown, cap the body size.
- Layer: redraw only when a cell id or band changes, treat a settling
camera as a retry rather than a rejected enable, keep low cells visible,
skip rows without finite coordinates, state the 3-aircraft rule in the
legend blurb.
- Voice: gnss-interference in set_layer_visibility / show_data_layers_menu
plus common aliases; voice pins re-derived.
- qa-gnss: stub the route in-page (request interception stalls Cesium's
geometry workers), assert every cell is built, cover all bands over land
and sea, screenshot every state with the Data Layers row open.
Hex project - Crew Leo Agile dev team.
Co-Authored-By: Claude <[email protected]>
Bins airborne ADS-B v1/v2 aircraft that report degraded navigation
integrity (NIC < 7, NACp < 8, or readsb's GPS-loss flag) into 0.5 degree
cells over a rolling 30-minute window, coloured with the gpsjam.org
bands. Keyless: reads the capped adsb.lol point snapshot around the view
through /api/gnss-integrity, which returns integrity fields only, caches
60 s per whole-degree anchor, backs off on upstream 429 and serves the
last snapshot on failure. Adds scripts/qa-gnss.mjs.
Built by the Hex project (Crew Leo Agile dev team).
Co-Authored-By: Claude <[email protected]>
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
fetchPinnedRadioResponse built `new Response(stream, { status })` inside
the raw https response callback, which runs outside the surrounding
promise. A Radio Browser mirror answering 204, 205 or 304 (null-body
statuses), or any status outside 200-599, made the Response constructor
throw. Nothing caught it, so the whole dev/preview server process exited
and every layer went down, not only radio. The catalog's mirror failover
never saw the error.
Mirror the guard local-receivers.js already uses: null-body statuses get
a null body, statuses outside 200-599 are rejected, and anything thrown
in the callback rejects the promise so the existing error handling and
mirror failover run.
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A KMZ could name one large packed image in thousands of <href>s, and each
one made a fresh Blob copy for Cesium to decode. kmzImageResolver now keeps
one blob URL per archive entry, and countKmlGeometry refuses a document
with more than 2,000 <href> and <Style> elements (MAX_KML_LINKS) before
Cesium reads it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Imported metadata stays inert: descriptions, native labels, properties and
KML extended data are dropped from every entity; names are kept as short
plain text. GeoJSON loads with a describe that builds no HTML, and
simplestyle (including marker-symbol) is dropped, so no icon asset is
fetched for a file and GeoJSON draws in its row's color.
- Bound geometry before loading: features and vertices are counted in the
parsed GeoJSON, the KML document and while reading GPX, and a file over
20,000 features or 250,000 vertices is refused before Cesium builds it.
- Imports run one batch at a time, so concurrent picks or drops cannot pass
the 12-file cap.
- Fly-to framing walks long tracks by index instead of spreading them into a
call.
- Fly-to is an immediate navigation through the application shell; the fly
after an import is a deferred navigation stamped when the batch starts and
re-asserted just before flying.
- Dated imports never change the shared clock: imported sources expose no
clock, entities are available for all time, and a KML gx:Track is drawn as
its line.
- GPX is read into GeoJSON with one line per track segment, without times.
- KML/KMZ rows show a hatched swatch (they keep their own styles); keyboard
focus is kept on the same control after hide/show and moves to the next
row after remove.
- Unit regressions for each, and the rendered QA now imports hostile
metadata, dated KML/GPX and a two-segment track, and fails on any request
for a file's contents or icon assets, a clock change, or surviving
metadata.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DISPLAY ▸ Import (and drop onto the globe) puts the person's own files on
the map as Cesium data sources, clamped to the ground, one color per file,
with a row to show/hide, fly to or remove each. Files stay in the browser
for the session.
KML/KMZ are sanitized before Cesium reads them (network links, remote
icons/styles, models, photo/screen overlays and balloon HTML removed; KMZ
images served from blob URLs), so an imported file cannot make the page
fetch anything. KMZ is read with a small dependency-free zip reader on the
platform DecompressionStream, with a zip-bomb limit. Bounded file size,
entity count and number of files.
Tests: src/data/geoFileImport.test.mjs, src/ui/geoFileImport.test.mjs.
Gate: scripts/qa-geo-import.mjs. The import half of #890.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fleet draws a grounded contact at its delayed position lifted onto the floor under it, but a new billboard was created at the delayed position without that lift. A taxiing aircraft whose reported fix sat lower than the ground under its delayed position started on the fix's floor and then rose on the next fleet tick. Creation now applies the same floor the fleet pass does.
The fleet renders behind real time, so a newly seen aircraft is displayed at its fix projected back to that delayed time. Its billboard was created at the raw fix instead, so it appeared ahead of where the next fleet tick put it and then jumped back about one render delay of travel before moving forward.
A mutation review left 18 earlier survivors; each now has a test that
fails with the mutant applied:
- the expanded viewer returns into the panel on shrink, close and destroy
(the fake DOM had no parentNode, so reinsertion was never exercised); the
fake DOM gains offsetParent and a MutationObserver that honours its
options, and a <body> child added while expanded goes inert;
- each pose moves the marker, drives FOLLOW and selects a new sequence;
close() retires an open still mounting or opening; a provider toggled
while the layer is off activates nothing; the adapter drops late and
superseded poses;
- share-link defaults: "any date" (0 days), the codec max pinned to the
filter's MAX_SINCE_DAYS (layerState cannot import it across package
boundaries, so a test ties the two), Mapillary on when a link omits it;
- Esc that something else handled, or typed in a field, keeps the
selection; a key problem outranks LOADING on the pill;
- the marker's terrain height (mesh, DEM, clamp then re-place);
- proxy: LRU memory cache and its half-budget rule, Retry-After capped,
a request after a cancelled fetch starts a fresh one;
- date-line tile ranking with and without focus; the horizon cull idles
while the camera stands still; the old zoom goes as soon as the new one
lands; a rate limit holds every refresh inside its wait.
One real bug found and fixed: Esc inside a contenteditable cleared the
selected sequence (selection.js now ignores isContentEditable targets).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cover every Norwegian station-based city-bike system with an open GBFS
feed: Kolumbus Bysykkel (Stavanger) and Farte Bysykkel (Skien/Porsgrunn)
through Entur Mobility, and Bysykkel Lillestrøm through JCDecaux
Cyclocity.
api.entur.io and api.cyclocity.fr join the GBFS allowlist, each kept to
its GBFS path prefix since both hosts front other APIs. Entur serves its
feeds without a .json suffix, so the endpoint checks accept either form,
and requests to Entur carry the ET-Client-Name header it requires.
Attributed under NLOD (Entur) and Licence Ouverte (JCDecaux).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add Norway's three Urban Sharing city-bike systems to the Bike Share
layer and get_bike_share. The feeds are keyless GBFS on
gbfs.urbansharing.com, which joins the proxy allowlist. The proxy now
sends the Client-Identifier header the operators ask clients to send.
Attributed under NLOD 2.0 in DATA_SOURCES.md and the data credits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
preserve Bilawal's merge history, OpenAI schema-combinator startup fix, and Contacts viewport note
keep the validated voice and analyst behavior while adopting the current provider-neutral feed routes and Google token fallback
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keeps the voice-core prompt rules and adds main's world-query and
vessels-vs-visuals rules; the tool catalog wraps the deixis-aware runner.
Also fixes two things the branch had before the merge:
- Live voice could not start: OpenAI rejects track_entity's top-level
anyOf. Model-facing tools now omit top-level combinators; the runner
and benchmark still require a query or a referent.
- The Contacts-centred analyst answer dropped the viewport coverage note.
The flight, military and vessel feeds were named after the providers the
bundled server uses (/api/opensky, /api/adsblol/mil, /api/ais-live and
their track routes; createOpenSkySource, createAdsbLolSource,
createAisStreamSource). Any server should be able to answer a feed from
its own provider, so the feeds are now:
/api/flights /api/flights/track?icao24=
/api/military /api/military/track?hex=
/api/vessels /api/vessels/track?mmsi=
with createFlightSource, createMilitarySource and createVesselSource. The
old routes are removed. Each server names its provider in X-Feed-Source
(the bundled server sends OpenSky Network, adsb.lol and AISStream, so its
attribution is unchanged) and the military feed's cache state and age in
X-Feed-Cache and X-Feed-Age-Ms. Sources report the provider the server
names and fall back to the feed's name.
The submarine cable source and the infrastructure data URLs built their
asset URLs from import.meta.url while the module loaded. Importing the
tool services therefore failed in runtimes without a usable module URL,
even for tools that never read those files. Build the URLs when they are
read; Vite still rewrites them in browser builds.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
loadBundledJson's callers passed a literal JSON import as a Node fallback,
which made the production build emit a JavaScript copy of every pack beside
the JSON the browser fetches. The loader now reads file: URLs itself under
Node (through process.getBuiltinModule, synchronously, as promptly as the
cached import it replaces), and the callers pass only the URL. On a Node too
old to provide getBuiltinModule it says that Node 24.14 or newer is needed.
dist/ drops from 54 MB to 42 MB. A test keeps app code from importing a pack
as a module.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Codex serves panels from codex-sandbox:// pages, where origins are
opaque: the panel recognizes the app's own addresses by scheme and host,
the vessels feed resolves against the document address, and the dev
server answers Codex's sandbox origins with CORS.
A panel page loads the app with <base> pointing at the app's server, so
addresses the app builds resolve against the document base instead of
the page location, and hash updates stay on the page's own address.
The dev server answers panel origins with CORS on the API routes too.
Coverage was checked only for packs among the cameras found, so an area
whose cameras were all trimmed away answered zero cameras, complete. The
catalog now reports where each trimmed pack's cameras are, and the tool
marks an answer partial whenever its area overlaps that region.
Camera packs keep their nearest cameras and the catalog cap thins them
further, so London answered 250 cameras while TfL offers many more. The
catalog now records each pack's full count, tags cameras with their pack,
and serves the packs it trimmed; find_cctv_cameras names them.
The installation source keeps one named site per display cell for the map.
Queries now ask for every site and the exact box, and report when the
source returned only part of the mapped sites.
keep contacts counts, rows, scope and provenance on one retained snapshot
report capped cohorts as lower bounds
separate sibling tool cancellation from newer user turns
align track_entity validation across runtime and benchmark paths
The datacenter and dam layers parsed their bundled GeoJSON Lines and
built analyst records inside the Cesium-backed layer module. Move the
data URLs, the line parser, mapAnalystRecord and layerTitle unchanged to
src/sources/infrastructureData.js; the layer module imports them and
still exports mapAnalystRecord. The consumer-build pin lists the new
module.
layerState.js held both the share-link layer codec and the coordinator
that restores layer choices into the running app and persists them to
browser storage. Move the coordinator, unchanged, to
layerStateCoordinator.js so the codec stays a pure data module that code
outside the browser can use to write share links. The registry stays in
layerState.js, where the token tooling reads it, and the aircraft
barrel re-exports both.
