Commit Graph
16 Commits
Author SHA1 Message Date
Sameh Khamis 10dcab837b Drape glow and dash lines, reveal lines by length, and move draped lines and clamped points every frame
The Cesium draw port now drapes glow and dash lines as well as solid and
flow ones, each with its own ground primitive.

revealFraction is the fraction of the line's length, measured along the
line. Both renderers cut there: Cesium discards fragments past the cut in
the line's material, so the hidden part neither draws nor picks; the stub
cuts the line before drawing and picking.

A draped line whose positions change is rebuilt the same frame, on a ground
primitive of its own, once terrain heights are loaded; until then it is
rebuilt as before. A clamped dot whose look is unchanged is moved in place.

The stub now picks lines. A new shared conformance check, draw.lines.drape,
covers draped glow and dash lines, the reveal cut, a draped line growing
every frame, and a clamped point moving every frame.
2026-11-07 06:52:46 -08:00
Sameh Khamis 3abb05ec4b Move satellites per-frame positions in place and tighten the guard
Add fromDegreesInto to geo/ellipsoid: the same steps as fromDegrees in
the same order, so the same bits, written into a given object. The dense
catalog sweep and the tracked-frame sample use it instead of allocating
a fresh point for every move.

The off-Cesium guard now also catches member reads on the dot, ring and
tracked-entity handles through optional chaining or brackets, handles
taken into local names, destructured or spread, and checks its own
patterns against examples of what they must and must not catch.
2026-11-07 04:05:39 -08:00
Sameh Khamis 0349941b71 Read a moving icon's position and course through one shared evaluator
render/motion/iconMotion evaluates a draw item's motion segment and course
glide at a time on the set's motion clock, without a renderer: where the
item is drawn, the course it is drawn with, and when its motion ends. The app
can now read a moving icon back (to follow it, label it, judge a pick or
its horizon) the way the renderer draws it.

The stub renderer evaluates its segments with it, in place of its own copy,
and so now steps a lerp with no span 1 ms after t0, as the Cesium renderer
does. The Cesium GPU icon sets read the course shown before a write, a
blend's target and when rows stop moving through it, from copies of what
they wrote, and write each glide with the offset it computes, so an exact
half turn goes the way the app reads it.

norm360/norm180 and Position-to-ECEF move to geo for both to share.
Conformance gains a check that icons are drawn where the evaluator puts
them.
2026-11-07 02:36:39 -08:00
Sameh Khamis a10f3a16e1 Read Street Level's camera and ground through the renderer's ports
The Street Level view maths no longer reads Cesium. The camera's place
comes from the camera port's pose; the visible box and the view focus
cast the query port's screen rays and meet them with the ground, the
WGS84 ellipsoid raised to the ground height, in geo; heights come from
the query port; the horizon cull for the marker and the cones tests
against an ellipsoid 1,000 m below WGS84 in geo and re-culls on the
frame port's pre-render. Ground clicks, the screen-centre aim, the
nearest-image point, photo framing, the coverage refresh and the ground
re-measure read the same ports and convert positions with geo.

geo's ellipsoid functions (toLonLatH, rayEllipsoid and those under them)
and horizonFrom take an optional ellipsoid, made with ellipsoidOf or
offsetEllipsoid; anything else, a map index included, means WGS84. Tests
check them against Cesium on raised and lowered ellipsoids.

view, index, cameraFraming, groundClick and selection leave the Cesium
allow-list. The Street Level entries are Cesium-free callers of the
unbound factories: given a viewer of a caller's own, with no renderer
bound, the caller loads ./render/cesium/unbound first. GhostMaps, which
uses the horizon cull and is still on the list, loads the camera factory
itself.

Differences the contract does not let us avoid:
- The ground under the camera no longer reads whether the globe is shown
  (the globe port has no visibility getter). Where 3D tiles answer under
  the camera they decide, as they did under Google 3D; elsewhere the
  terrain answers, then the drawn surface below the camera. Over 3D tiles
  shown on a map with the globe (and under other primitives at the
  nadir) those now count as ground.
- Without depth-texture support the query port answers no heights, the
  terrain included, so the ground then reads as the ellipsoid.
- selection and groundClick still read the click dispatcher's own pick
  for now; they move to draw-set hits with the coverage lines.
2026-11-07 01:40:32 -08:00
Sameh Khamis bb85e0fa74 Draw moving icon sets on the GPU through the Cesium draw port
An icon set whose items move along motion segments, glide their course,
recede toward the limb, pick through a larger proxy or switch images by
drawn size, or that takes columns, now draws as one instanced
IconSetPrimitive in place of its billboards. The set switches the first time
an item needs it (or columns arrive) and stays switched; a course blend
alone switches it only when everything it holds can go. The Cesium ports
advertise columns, motionSegments and courseGlide.

GPU sets refuse loudly what billboards draw and they do not: clamped
heights, fadeByDistance, displayRange, offsets, anchors other than the
centre, axis and screen rotations, opaque and additive blends, images other
than URLs and SVG, and more images than the shared atlas has room for. A
refused write changes nothing.

The shared icon columns gain an image switch size, a pick proxy and a
per-row depth-test distance (defaulting to always over depth, as before),
arcs gain a climb rate, and the epoch rebases in both directions. Rows keep
asking for frames while they move, turn or blend; a write that moves a row
as it already moves (a restyle, a focus change) leaves its segment alone.
Billboard icons now fade with focus as GPU ones do.

Conformance gains columns and motion checks for the Cesium adapter.
2026-11-07 00:38:20 -08:00
Sameh Khamis 0933ff49ff Ease street traffic heights through the query and camera ports
Height easing projects waypoints through the query port and keeps them
beyond the camera's near plane from its pose, instead of the Cesium view
matrix and scene transforms. Point maths uses new allocation-free geo
helpers (distanceSquared, copyInto, lerpInto), which road selection now
shares. Retention leaves the Cesium allow-list.
2026-11-07 00:09:10 -08:00
Sameh Khamis a2503476de Compute launch paths, cameras and colours without Cesium
The launches layer's path building, replay camera maths, policy constants,
state, marker colours and mission panel no longer import Cesium. Paths and
camera poses are plain ECEF points computed by the geo helpers with the
default renderer's own formulas in the same order, so trajectories, orbits
and camera framing land where they did. Geodesic interpolation moves from
the stub renderer into geo/geodesic (geodesicLine, solved once per
geodesic), and geo/sphere gains the renderer's sphere union.

Marker colours are renderer colours, with the panel's CSS from the same
palette. The rendering part, still Cesium for its entities, converts the
plain points where the entities take them, culls with the shared horizon
test, loads the unbound camera factory, and hands the panel the live
payload position directly instead of through the entity.

Camera, model, panel, paths, policy, policyHelpers and state leave the
allow-list.
2026-11-06 22:57:55 -08:00
Sameh Khamis e74c7c1f44 Draw submarine cables through the renderer's draw and camera ports
Cable lines, landing pins, polygon fills, reference stems and reference
points are now five draw sets per layer (submarine-cables:N:lines and so
on) instead of GeoJSON data sources and entities. Clicks resolve through
the draw hit; flights and the sweep's eye go through the camera port.
The layer keeps the styling the GeoJSON loader gave it: cable colours,
widths and alphas, simplestyle stroke, fill and marker properties, fills
that keep the source's alpha, raised polygons at their heights, the
default pin image, and features without a reference drawn but neither
picked nor culled. Lines are densified along rhumb lines at the
renderer's own granularity, so the draped geodesic arcs land on the same
vertices the rhumb-line polylines did.

Supporting pieces:
- geo/rhumb, geo/horizon and geo/geodesic port the default renderer's
  rhumb line, ellipsoidal occluder and Vincenty inverse; the stub
  renderer now uses the shared horizon test and Vincenty inverse
  instead of its own copies. render/color gains cssColor, which reads
  CSS colours as the renderer does (hex, rgb, hsl; not named colours).
- The Cesium draw port changes a line in place when only whether it
  shows changes (draped, on its ground primitive, waiting for it to be
  ready rather than restarting its build) or where an undraped line
  runs; anything else still rebuilds. Icon sets honour their blend.

Ingestion, interaction, overlay, policy, rendering, state and surface no
longer import Cesium and leave the allow-list. Pins are culled at the
horizon each frame by the draw port instead of on the sweep, and
marker-symbol glyphs are not drawn inside pins.
2026-11-06 22:10:53 -08:00
Sameh Khamis 6f82f9cc9c Draw GNSS integrity cells through the renderer's draw port
Cells are clamped rectangle fills in one draw set per layer
(gnss-integrity:N), made with pickable: false so they never hide what is
under them from clicks, as before. The view anchor comes from the camera
port: where the line of sight meets the ellipsoid, else the middle of the
view rectangle, else the point under the eye. Re-anchoring follows the
camera port's moveEnd and changed events. The ray-ellipsoid intersection
moves from the stub renderer into geo/ellipsoid.js for both to use, and
geo/rectangle.js adds the antimeridian-aware width, height and centre of
a radian rectangle. The layer leaves the allow-list; the QA script finds
the cells among the scene's unpickable ground primitives.
2026-11-06 20:30:33 -08:00
Sameh Khamis 96d860854f Move radio navigation and viewport queries onto the camera port
Radio's camera state, globe recenter plan and viewport anchor now read the
camera pose instead of the Cesium camera. The anchor intersects the view
ray with the ellipsoid through a shared rayEllipsoid helper, moved into
geo/ellipsoid from the stub renderer and checked against Cesium. Scratch
vectors are plain objects. navigation, queries and state leave the Cesium
allow-list; rendering and lifecycle stay, since they rely on entity
clustering, which the draw port does not offer yet.
2026-11-06 20:26:35 -08:00
Sameh Khamis bd5a688144 Draw tropical cyclones through the renderer's draw port
The cyclone layer no longer imports Cesium. Its advisories are three draw
sets per rendering (points, lines, cones) taken from drawOf(viewer): the
centers and forecast points are clamped dots culled past the horizon, the
tracks and cone outlines are draped lines, and the cones are clamped
polygons that keep their holes. Flights go through cameraOf, and the focus
sphere comes from a port of BoundingSphere.fromPoints in src/geo/sphere.js.

Clicks read the new ClickEvent.drawHit: the dispatcher's pick as the
contract's Hit when it is a draw-set item. The Cesium port's query uses the
same conversion, now in render/cesium/drawHit.js. pickStorm takes that hit
and accepts only current items of the layer's own sets.

Every advisory commit redraws the points, so an empty advisory clears them;
an unchanged selection draws nothing. Far-side tracks and cones are left
to the globe's depth instead of a per-frame occluder. Both cyclone files
leave the Cesium allow-list.
2026-11-06 19:15:09 -08:00
Sameh Khamis fb2bb9ae46 Match Cesium's fromDegrees exactly and keep toEcef in the stub
fromRadians divides by gamma as Cesium does, so geodetic to ECEF is now
bit for bit Cesium's, and the test checks it exactly. Its tests also
cover three height bands, points inside the Earth and NaN input. toEcef
reads the renderer contract's Position, so it moves to the stub's maths.
The ellipsoid docs pair each conversion with Cesium's.
2026-11-05 14:28:10 -08:00
Sameh Khamis 11167fa608 Add quaternions to src/geo
Ports Cesium's axis-angle, product, rotation-matrix and heading-pitch-roll
quaternions, with rotations given as frame axes. They match Cesium bit for
bit, including heading-pitch-roll frames on the polar axis. The model
convention is documented: at heading 0 the forward axis points east.
2026-11-05 14:15:13 -08:00
Sameh Khamis 5a7c7f3d57 Add the sun and moon to src/geo
A port of Cesium's Simon 1994 sun and moon positions, its TEME to
pseudo-fixed rotation and the JulianDate time handling, with epoch
milliseconds as the only input. Results are identical to Cesium's,
tested with exact equality from year -500 to 3000 and across every
leap second. Times outside the model throw a RangeError, where
Cesium's debug build throws.
2026-11-05 14:10:48 -08:00
Sameh Khamis 103ecae1f1 Read the agent world packet's camera through src/geo
The world packet converts the eye position with toLonLatH instead of
Cesium's Cartographic, so the agent-world-packet group no longer needs
cesium. Degree conversions use precomputed factors, as Cesium.Math does,
so results stay bit for bit the same.
2026-11-05 14:01:57 -08:00
Sameh Khamis 1d7d454dd6 Move the stub's geodesy into a Cesium-free src/geo
WGS84, ECEF and geodetic conversions, surface normals and east-north-up
frames, as plain {x, y, z} objects, exported as ./geo. A test checks
them against Cesium over random points and the poles. The stub's maths
re-exports them and keeps only the camera angle conventions.
2026-11-05 13:49:53 -08:00