Give each scene its own render governor, owner holds and recent idle requests.
Make the Cesium render backend own its request mode directly, so the governor
drives engine.render on both engines without a dependency back from Cesium.
Route layer requests through their attached engine and capture the attachment's
governor for camera motions, orbit, annotations and shell controls. Release
retained-layer holds before clearing the outgoing engine, and destroy the
governor after scene consumers have detached.
Preserve Cesium's owner-keyed holds, pre-install buffering, last-release settling
frame and one-shot requests during continuous rendering. Navara keeps the same
render policy. There is no intended visible change on either engine. Simultaneous
scenes no longer share holds, and an old captured service cannot release a
replacement attachment's hold. Cover both rules on fake and headless Cesium
engines, including an old orbit ending after reattachment.
Viewer-reference lines fall from 910 to 891, Navara-kind checks from 2 to 1,
and engine-name lines from 33 to 32. All other coupling counts stay unchanged.
Checked in the browser, keyless: qa-perf passes on both engines with the
same idle, active and release counts as before (24 checks on Cesium, 22 on
Navara).
The layers that still had one Cesium and one Navara implementation, or
drew on Cesium only, now draw through engine.movers, engine.lines and
engine.camera on both engines, and application code holds the engine
instead of guessing it from a viewer.
- Aircraft family: flights, military and local ADS-B share one display
(src/layers/aircraft/render/display.js). The Cesium and Navara
renderers are gone. Where they differed, the display follows Cesium:
- attach and visibility tracking, live disableDepthTestDistance
changes, the tracked glyph's distance scale, model ids that change,
local ADS-B markers hidden until shown and its UAT ring as a point;
- the trail head's hidden alpha is 0.45, the contract's
depthFailAlpha scaled by the head's 0.9.
The tracked glyph stays over the fleet, as on Navara. The movers
contract reports readiness per model and reads model axes as the
glTF's own on every engine. Cesium's follow takes any native target
through a proxy entity in the ENU frame and mirrors its readout fields.
- Wildlife Sightings draws badges and the density glow as sprite sets
and its privacy cells as line outlines (no fill yet). It takes clicks
from engine.input and its card anchors to the engine's canvas and
camera, so the layer is in both engines' catalogs again and a switch
keeps the session's layer set.
- Cockpit: cockpitHost takes the engine only. The ridden aircraft is the
engine follow's target, hidden through its sprite; only the Cesium
Viewer's stock double-click is still routed around.
- About forty camera, navigation, share-link, HUD, voice, detection and
layer-lifecycle callers take the engine. isGlobeEngine and
engineFromViewer calls outside src/globe fall from 51 to 14.
The coupling baseline drops accordingly: layer renderer lines from
5239/12331 to 4546/11106 (Cesium/Navara), `viewer` lines from 2424 to
2209, Cesium-importing files from 69 to 66.
Main's camera, voice, Cockpit and layer work now runs on the globe
contract where this branch draws through it:
- The voice tilt to an angle, its pivot about the place under the
crosshair and the frame limit from orbit run through the camera rig;
src/globeInView.js measures a camera pose with src/geo instead of a
Cesium camera. The free-look height limit and the globe-in-view
recovery stay Cesium-only for now.
- Cockpit takes main's own-layer entry rule. Double-clicking the
followed track goes through cockpitHost.routeDoubleClick, so it works
on both engines.
- Space Missions' failed-entry rollback and GhostMaps' age filter run
in the engine-neutral layer code. On Cesium an expired report is
dropped in place; on Navara its product is redrawn.
- Wildlife Sightings joins the catalog Cesium-only: Navara leaves it
out, and the shell builds its card only for the real layer, so a
Navara page no longer fails to start on its stand-in.
- One instruction sentence is shorter, which keeps the Realtime prompt
within its 55,500-character budget with the Sentinel-2 basemap.
From 400 km, a tilt to -5° that a zoom out x2.5 caught 70 frames in eased down from the camera's old pitch at the new range. That put the camera below the place's horizon: the first frame's crosshair hit the ground 186 km from London, and London stayed hidden for about 11 frames. The re-solve also left the pivot pitch at 0°, so a zoom in before the next frame computed an infinite clearance floor, was refused, and stayed at 1,000 km.
The re-solved pivot pitch now stops at the place's horizon limit, or where the pivot already was. A camera that the zoom leaves past that limit steps down to it with the zoom and holds it, and the zoom still reports that angle. A zoom in straight after brings the range back to 400 km.
From 400 km, a tilt to -5° that a zoom out x2.5 caught at -8.0005° reported -8°, and the next frame jumped to -9.407° and ended there. The zoom kept the camera's pitch as the goal when it was already past the new range's horizon limit, but at the same pivot pitch the longer range looks down more steeply, so the next lookAt dropped the camera 1.4° at once.
The zoom now re-solves the pivot pitch so the new range keeps the camera's pitch, and aims the tilt at the asked angle or the new limit, even when that limit is below where the camera stands: the tilt eases down to it. The zoom's reply names that end, and the camera reaches it with no frame moving more than 0.1°.
A pivot range rebuilt from the camera's position came back a hair over the 1,000 km cutoff when the view sat exactly on it, so a tilt from 1,000 km ran in place and lifted the crosshair onto the sky. The cutoff now allows 1 m of slack.
A zoom during a tilt to an angle changes the range the pivot holds, and with it the place's horizon limit, but the tilt kept its old goal and its reply its old angle: from 400 km, a tilt to -5° zoomed out x2.5 reported -5° with no note and ended at -9.4°. The zoom now re-judges the goal at the new range, eases the tilt from where it is to it, and its result names the angle the tilt now ends at, with a note.
The pre-check picked the in-place look from args.direction alone, while the tilt itself turns down for any direction but up. A tilt sent as left or right at the frame limit was checked as a turn left or right, refused as losing the globe, though it turns down toward the planet. A rotate sent as up or down was checked as a look up or down, though it turns right.
A tilt's look now comes from its goal pitch against the current pitch (tiltLook), and the tick tilts in place through tiltInPlaceWithinFrame(cam, m, goalPitch). Neither depends on the direction word, so a tilt to an absolute angle, or a tilt with no direction, can use them as they are.
From 550 to 1,000 km of range the camera's -5° limit lies past the place's own horizon. The swing ran into its 150 m clearance, let go of the pivot and tilted the rest in place, which lifted the crosshair onto the sky (28 to 63 km up from 600 to 900 km), and a return to top-down then landed hundreds of km from the place.
The swing now hands over to an in-place tilt only where the clearance is what stops it (within about 17 km). Farther out it stops with the camera 0.5° above the place's horizon, still pivoting: a tilt to an angle reports the angle it reached with a note, a continuous tilt stops there, and a further tilt up is refused as at the limit. Tests check that the crosshair stays on the place, frame by frame for a continuous tilt, and that top-down returns over it.
- Navara 0.2.1 never frees pick batch ids, and the mover banks rebuilt
their instanced meshes on each attach, leaking about 260 KiB of
WebAssembly memory per switch. A per-view pool hands released ids back
out; the long soak now asserts native growth of at most 32 KiB per switch.
- Navara 0.2.1 sometimes drops the first show:false update on a new
vector layer, so a zone turned off right after a switch back stayed
drawn. Polygon displays hide by deleting their layers and rebuild them
when shown.
- Camera verbs drive both engines through the globe contract; the Cesium
viewer rig and the tests of states it can no longer reach are gone.
- Flights and military tracking share src/layers/aircraft/tracking.js.
- The geo import scenario reads movers only where the engine has them.
- Add the Navara section to docs/CURRENT-STATE.md and a changelog fragment.
- src/geo drops the ported debug argument checks and the tests that
bitExact already covers; package boundaries accept a directory entry,
so src/geo/ is listed once per group.
- Cesium no longer carries movers and lines nobody draws with: they are
optional engine capabilities. The fake engine and the Cesium camera use
the shared cameraMath; unused contract tables, clock.ticked, the
'finest' surface detail and Navara click statistics are gone.
- ALPR keeps one overlay core and one presentation model for both
engines, bikeshare one station bookkeeping, the Navara ground effects
one definition helper; image atlases, view centres, mover banks and
colours are shared.
- The legacy switch route, the clock offset and rate controls and other
unused exports are removed.
- The acceptance runs the Navara draw, geo import and scope checks;
scenarios use the harness switch and page helpers; the main chunk
check keeps the size budget only and runs once in CI.
Review follow-ups for the globe-in-view recovery and voice limits.
- Leave a camera flight in progress and a playing Director scene, holds
included, to their own framing. The recovery is now installed with the
scene tools, which own the Director, and reads its running state.
- Reuse a voice turn's half-degree proof only from the position and
direction it was proven at, so a release that moves the camera checks
the turn again.
- Share one free-globe-camera check between the recovery, the voice
turn limit and the globe rotation.
- Keep an enableLook setting other code makes after the free-look limit
is installed, instead of writing back the install-time value.
- Name the nudging test for what it asserts, the 1% floor, and document
that a view losing its surface without a camera move waits for the
next one.
- A tilt's angle, limits and "unchanged" check use the camera's own
pitch. At regional range the pivot pitch is up to about 8 degrees
shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
instead of the orbit's 5,000 km, and a zoom in that reaches the
clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
begins, so a stalled lookup no longer holds it past a flight that
landed. Wait listeners are removed when a wait ends, and a lookup that
found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
steps use direction.
Every Cesium read that a Navara page made was surveyed with the strict acceptance (GEV_QA_CESIUM_TRAP=record). Math on those paths now uses src/geo: screen annotations, weather and wind center readings, cyclone picks, scene data pack polygons and images (new navaraGeometry.js), the awareness subject, the orbit offset of camera verbs, voice frame_overhead, the agent world packet and Directions colours and ground picks. The celestial ring's Sun and Moon come from a bit-identical port of Cesium's Simon1994 model, JulianDate and TEME rotation (src/geo/simon1994.js, julianDate.js, transforms.js); a Cesium globe still applies its ICRF rotation once loaded.
Traffic, Street Level, the Nepal event and locator and geo import build on Cesium's math or entity model on either globe; their enable (or the import) now loads the SDK first through src/app/loadCesium.js, synchronously when it is already there. A production page guards the global so a missed read is reported and starts the load. No module reads Cesium while it loads (scripts/check-cesium-load-time.mjs, run by npm test). Cesium.js is still loaded by index.html here.
A motion queued behind a voice fly-to acts on the last flight that moved the camera. A later lookup that was not found, threw, or was cancelled once a newer voice fly-to had begun moved nothing, so the motion looks past it rather than refusing or running early and cancelling the flight still in the air. It never acts at a flight older than the one it started waiting on. A lookup cancelled while still the latest voice flight (a search, a share link, Cockpit) still refuses.
The top-down no-op now reports the camera's real pitch.
A motion queued behind a voice fly-to now follows a later fly-to in the same reply whether the earlier one arrived, was cancelled or failed. A geocode that loses navigation reports failed, so the motion used to be dropped; and a flight left flying while the next place is looked up could land and run the motion there, taking navigation and cancelling the newer flight. The deadline, abort and stale-reply checks still end the wait.
pitchDeg -90 or -89 from a top-down view is now unchanged rather than a 1° tilt up, and the tilt tests' pitch loops are bounded.
From the whole-globe view the camera could end up facing empty space with
only stars on screen. Cesium's free look (Shift+drag) turns the camera in
place, and from 18,000 km the planet's edge is only about 15 degrees from
nadir, so a few drags turned it out of frame. The rolled pose was then
saved into the share hash, so a reload or shared link opened on stars too.
- Allow free look only below 1,000 km. Orbit, tilt and zoom are unchanged.
- Measure how much of the frame shows the planet's surface by casting a
32x18 grid of view rays at the WGS84 ellipsoid. While the scope mask is
on (the default) only the rays inside its keyhole count, since the mask
hides or dims the rest of the frame.
- When a camera move ends above 1,000 km with no ray on the surface, turn
straight down at the same position and heading. Limb glow and a sliver
up to about one grid cell thick can count as out of view. The end of a
move comes from Cesium's moveEnd and from a check of its own that
samples the pose every 250 ms after moveStart and acts once it has held
for half a second: at some of these poses the camera drifts by a
rounding error every frame, so Cesium never sees it stop and never
raises moveEnd. The zoom-out guard from #1522 keeps wheel and pinch
zoom-outs in view; this catches the other ways a move can end looking
away, such as a saved or shared view that did, or a
drag that Cesium turns into an in-place look below its 7,500 km
trackball height (one that starts on the stars, or a tilt drag with the
screen centre off the planet). Views with more surface, tracked or
locked cameras and the 2D and Columbus modes are left alone.
- Voice tilt and in-place turns of a free 3D globe camera above 1,000 km
stop when about a tenth of the frame still shows the planet (or about as
much as it showed when it started, two grid cells of sampling noise
allowed), never below about 1% of the visible frame; a view that already
shows less only keeps or gains what it has. A turn that cannot go half a
degree further without crossing that limit is refused with a reason
instead of reported as done, and a turn it accepts turns at least that
half degree. A turn that keeps or gains surface is not refused, even
after the window has been resized, except that near the limit, where the
planet's edge crosses the sample grid, sampling wobble can occasionally
refuse one (most often above about 15,000 km and on phone or ultrawide
frames); nothing then turns away from the planet. A turn that starts
where the last voice turn left the camera keeps that turn's limit, or a
higher one if the planet now fills more, so repeating the request does
not take any more; once anything else has moved or turned the camera, a
turn is measured from what is on screen. A request made while the camera
is tracked is judged by the pose voice's release of the follow camera
will leave, before that release, so a refused turn keeps the tracking.
The frame measure and the look-step limit live in src/globeInView.js,
shared by the viewer and the voice camera verbs.
A motion drives one camera through a rig: a Cesium viewer's own camera, or any globe engine through camera.pose/setView/lookAt/release/transform/flightActive/following and frames.preRender. An engine rig binds its frame, canvas-input and follow listeners only while its motion runs. A finished once orbit now releases its lookAt lock, and an orbit armed through a flight keeps its nudge budget until it starts.
A zoom in during a pivoting tilt stops at the range that keeps the camera 150 m above the pivot at its current pitch. A zoom that moves the range by less than half a metre (at the clearance, the 80 m floor or the 5,000 km cap) now answers not zoomed instead of ok, and a tilt reports tiltRangeAdjusted rather than orbitRadiusAdjusted.
- A motion waiting on a voice fly-to follows a later fly-to in the
same reply that cancels it, within one deadline, instead of
reporting that its flight did not arrive. A stale reply stops
following.
- The wait is 15 s, down from 30 s: it holds the tool output, and on
Gemini the later tools in the turn.
- Beyond 1,000 km of range a tilt happens in place instead of
swinging thousands of km about the crosshair point.
- The tilt-nudge limits read the pivot pitch the motion starts from,
including for a voice tilt from a tracked view, whose follow camera
is released before it moves.
- move_camera's argument checks run before the flight wait, so a
malformed call is refused at once.
- Tests: t.after cleanup in the fly-then-motion loop, the pitchDeg
pin asserts the field before removing it, and the handoff-order
pin follows the extracted argument checks.
- A zoom during a pivoting tilt now scales the range the tilt holds,
as it already did for orbit, instead of being undone on the next
frame while reporting success. The zoom limits no longer move a view
the wrong way: a zoom in leaves a view closer than 80 m in place, and
a zoom out leaves an orbit beyond 5,000 km where it is.
- A grab, touch or wheel on the map while a voice fly-to is in flight
drops the motion queued behind it. Cesium lands the flight anyway,
so the orbit or tilt would otherwise take the camera back. Chained
fly-tos in one reply keep the earliest snapshot.
- A pivot tilt toward the horizon stops lowering the camera at 150 m
above the pivot and tilts the rest in place, so a close view no
longer ends inside tiles or a hillside.
- pitchDeg is an absolute angle. A direction that contradicts it is
refused, judged from the pitch the swing starts at, and the tool
description says so.
Conflict resolutions:
- src/main.js: upstream's PHOTON_URL place-search setting is read once at
module level and passed as geospatial: { endpoints: { photon } } by
createApplication(), so every engine start of the switch flow gets it; the
old single top-level createStandaloneApplication() call stays removed.
- src/layers/bikeshare/render/cesium/rendering.js: upstream's
publishedCapacity fix applied with this branch's
resolveCapacity(model, capacity, status) signature. The same fix is ported
to src/layers/bikeshare/render/navara.js (record.publishedCapacity, status
polls resolve from it), with a Navara regression test; upstream's
proxyRoute test imports the moved render/cesium/rendering.js.
- src/layers/traffic/flow.js: upstream's nextTask() yield and current()
check kept before the scene is taken from this branch's
_trafficScene?.() ?? _viewer?.scene with its missing-scene return.
- scripts/package-boundaries.json, scripts/format-scope.json: union of both
sides' file lists.
- src/voice/actionSchemas.test.mjs: both history comments kept, payload hash
recomputed for the merged schemas (Sentinel-2 map stack enum plus the
shorter layer alias hint).
- src/hudAltitudeDatum.test.mjs: this branch's engine-based IntelHUD
construction with upstream's placeLabels summary context.
"Fly to Paris and orbit it" reaches the app as two sibling tool calls,
which OpenAI runs at once. With a place that needs a lookup, the orbit
started over the old view and the late flight then replaced it; with a
known place, pan and rotate cancelled the flight already in the air.
Orbit, pan and rotate now wait for a pending voice flight the same way
tilt does: up to 30 s, and not run (saying so) if the flight is
cancelled, finds nothing or times out. Stop and rotate_globe do not
wait. Orbit keeps its own arming for flights the voice runner does not
track.
A voice fly-to frames a city top-down, at pitch -90. The tilt clamp
rejected any step that left the pitch below -89, so the first frame of
"tilt up" stopped the motion and "tilt down" was refused: from the view
voice lands on, no tilt ever moved the camera. A bare "tilt the camera"
also failed because tilt required a direction.
- Clamp tilt only in the direction of travel, so -90 can tilt up.
- Swing the camera about the ground under the crosshair, so the place
stays centred and the heading is kept. A tracked view still tilts in
place, and a pivot tilt yields when tracking takes the camera.
- Add an optional move_camera pitchDeg for "tilt 45 degrees"; a tilt
with neither angle nor direction settles at -45 (oblique view).
- Re-derive the voice tool schema pins for the new argument and wording,
and keep the Realtime prompt under its 52,000-character budget.
Answers the review of bdbbc3d7 and the IC8 pass after it.
A shape hidden from Draw's list was only set to alpha 0, so the line's
flowing stroke, which keeps its own colour, stayed painted. Now:
- the world renderer's sync() sets every entity of a hidden mark to
show = false, and FlowMaterialProperty follows the mark's alpha;
- the screen renderer does not project a hidden callout, so it is not drawn
and cannot push a visible label aside;
- hiding acts at once, even before a mark's first frame, and with every
mark hidden the annotations render hold is released after one last frame;
- fly_route skips a hidden route.
Hand-drawn shapes are never merged as duplicates: every one is drawn on
purpose and unnamed until its row names it, so a second pin dropped near
the first was dropped, or replaced the first when its colour differed. A
restyle the renderer cannot draw now also syncs the renderer.
Tests cover each: renderer show/hide and flow alpha, the screen skip, the
render hold and its last frame, a show with no fade-in, hidden routes, two
nearby pins, and the restyle rollback.
Preserve the camera, map source and layer selection across engine sessions. Restore the previous engine if startup fails and retain local history navigation.
Move the Cartesian3/Cartographic/Matrix/Quaternion/Transforms/Math calls of
the first batch (src/data motion, anchor, tracked-camera and icon helpers;
the root camera, locations, HUD, share-link, world-focus, ground-guard,
orbit and cloud modules; services/groundSnap) to src/geo. Behaviour is
unchanged: same argument order, same `result` semantics.
Kept on Cesium: out-of-scope classes (JulianDate, Axis, HeadingPitchRange,
BoundingSphere, Rectangle, EasingFunction, EllipsoidalOccluder with its
WGS84 and seed vector, SceneTransforms) and Matrix4.IDENTITY wherever it is
handed straight to a Cesium camera call (locations.test pins its identity).
synthesizeForwardKinematicsFix now returns a plain position, so the two
snapshot renderers clone it with the static Cesium.Cartesian3.clone instead
of the instance method. The package-boundary groups that reach these
modules now own the src/geo files.
Supersedes #219 by @spcpza, ported onto the current component layout with fixes from review.
Verified before merge: format, package boundaries, unit suite, build, and the browser tracking suite; a browser harness for the change where one applies; adversarial review applied.
Co-authored-by: spcpza <[email protected]>
The first formal release.
- One-click install via Pinokio; keyless boot lands on a live Esri World
Imagery satellite globe with keyless terrain, with automatic OSM fallback
and graceful degradation when terrain is unavailable.
- Provider Settings (the POWER UP panel): add, replace, or remove API keys
inside the app; credential files made owner-only before any secret is
written; external keys shown read-only; the panel refuses shared or proxied
servers.
- Keyless capability responses for the optional HUD summary and place search.
- Aircraft-identity voice answers cover operator, type, and route, and say so
plainly when enrichment is unavailable.
- README rewritten keyless-first; concise 0.1.0 changelog section; CI
workflow included.
Gates: 2,672 unit tests pass / 0 fail, build clean, tracking regression
108/108, map-source tray QA pass, setup doctor ready.