feat: Kartverket ground heights for Statens vegvesen cameras

The Vegvesen camera feed is 2D, so every camera shared one flat 150 m
ground prior and mountain-pass cameras could sit hundreds of metres below
the terrain where neither the point-height prior nor the ground snap
resolves. Each camera now gets its terrain height from Kartverket's
keyless point-height API (CC BY 4.0): ~840 of ~845 cameras.

- 50 points per request, six in flight; points a full batch answers null
  for are retried once in batches of 10 (the API drops points from large
  batches).
- Sea-floor depths (dybdekurver / Havflate) under bridges and quays
  count as the water surface, 0 m.
- Heights are cached by position, so the 15-minute refresh only asks
  about new or moved cameras. A catalog load waits at most 12 s; a slower
  lookup keeps filling the cache for the next refresh.
- CCTV_VEGVESEN_HEIGHTS=0 turns it off; Kartverket is credited beside
  Statens vegvesen in the attribution popover.

Follow-up to #929.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
This commit is contained in:
Trygve HemminghyttandClaude Opus 5.5 committed 2026-10-05 21:46:20 +02:00
1 parent a08a53cf94
commit c43f58dc3f
8 files changed
+479 -11

No files matched your search

+10
View File
@@ -2,6 +2,16 @@
## [Unreleased]
- Give each Statens vegvesen camera its own ground height from Kartverket's
keyless point-height API (CC BY 4.0) instead of one flat 150 m prior, so
mountain-pass cameras no longer sit hundreds of metres below the terrain
where neither the point-height prior nor the ground snap resolves. About
840 of ~845 cameras get a height; the rest keep the old prior. Bridge and
quay cameras over water use the sea surface, not the sea-floor depth the
API returns there. A catalog load waits at most 12 s for heights, and a
lookup still running then fills a cache the next refresh applies.
`CCTV_VEGVESEN_HEIGHTS=0` turns the lookup off. Follow-up to #929.
- Add Norway's road cameras from Statens vegvesen as a CCTV pack. The camera
list is one keyless GeoJSON request to the agency's OGC API view of its
DATEX 3.1 CCTV table, so no DATEX account is needed. Every working camera