Sprites for helicopters, ground vehicles, stations and vessel types; history to live without an empty map; model parts in Cesium

Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
This commit is contained in:
Sameh Khamis committed 2026-11-17 15:09:54 -08:00
1 parent 624c229bc2
commit 7186f720df
97 files changed
+6586 -343

No files matched your search

+28 -7
View File
@@ -2291,8 +2291,20 @@ clears nothing. A snapshot that fails clears the time and is asked again after
5 seconds; one the source drops for a newer request (an `AbortError`) is no
failure, and nothing is cleared. A layer has one snapshot loading at a time:
the older is aborted before a newer starts. Moving the view while vessels follow the clock asks for the new
area at the same time. Back at live the contacts are cleared and the layer
polls at once.
area at the same time. Back at live the layer polls at once and keeps the
contacts it shows until that live snapshot answers; it then stands in for every
contact. A contact it has keeps its icon and model: an aircraft eases from
where it is drawn onto its live path (unless that is farther than a jump would
be, 5 km; a placed aircraft over a recovery's time, nose along the way, and a
new answer while that ease runs eases on from where it is then), and a vessel
moves to its live fix. A contact it lacks is judged as a live poll judges any
absence, as last seen at its newest fix rather than when it was loaded: a
partial snapshot keeps only those fixed within five minutes, the tracked
aircraft stays only while its newest fix is under ten minutes old and it has
not landed, the selected vessel is held as a live refresh holds it, and the
rest go at once (no missed-poll grace); the tracked aircraft's trail goes on. A live poll already out when
the clock comes back to live is the one that takes over. A live snapshot that fails, or that brings no
vessels, clears the layer; one dropped for a newer poll clears nothing.
A timeline may also declare `spanMs`: each record of a snapshot at a time then
carries `fixes`, `{ atMs, lat, lon, altitudeM? }` in time order, its own track
@@ -2307,6 +2319,13 @@ those it has keep their place, as their fixes put them. Paused, a time nearing
the end of the fixes after the newest asks for the snapshot there. A contact is not drawn more than a minute before its first
fix, as it was not there yet. Each contact keeps at most 240 fixes, at least
20 seconds apart, and the loaded snapshot times span at most 20 minutes.
Playing on with fixes, the layer asks for the next step 4 seconds of play
ahead at the clock's rate (at least a step; at 60x, 4 minutes ahead), and play
holds only a minute short of where the newest snapshot's fixes end (as far as
nine in ten of its records' fixes reach, at most the declared span; the minute
at most half of it), not at the step still loading. An aircraft keeps the fixes it holds
when the next snapshot's run reaches back over them: only the last of them,
made again from the new run, and the fixes past it are made and added.
A snapshot at `atMs` describes the world as it stood then: `observedAtMs` is
at or before `atMs`, no record is observed later than `atMs`, freshness and
@@ -7415,7 +7434,7 @@ silently demoting every later lookup for the session.
Mission world text has no native `LabelGraphics`: overview launch markers publish at most 48 ambient candidates for a 24-winner budget, while selecting a mission clears that overview source and publishes its launch-site callout, stage re-entry annotations, live/estimated payload-position readout, and orbit annotation as protected selected-lane entries. The source retains the exact former strings and colors. Static anchors reuse the Cartesian values used to build their mission geometry; the moving payload entry reads the layer's per-frame live-position cache; catalog-backed orbit annotation positions are cached in the same one-second matrix update that realigns the orbit primitive. Keyhole edge fade, horizon culling, final collision placement, and UI exclusion are owned by the shared host. Deselect restores the bounded overview, and refresh, disable, and destroy replace or clear both mission sources.
A selected mission renders its orbit as four repeating tactical sectors, each containing one prominent cyan dot followed by one hundred thin translucent dashes. The bright dots act as orbit anchors while the subdued dash field remains depth-tested against the globe and is shown only for the selected mission.
Close selected-pad views add one static 500 m-radius cyan launch-zone ring with a low-opacity translucent fill over the sampled photoreal launch-site surface. The single scene primitive is created only for the visible selected site and is otherwise dormant. It appears during Focus, sufficiently close manual zoom, and the replay countdown, but is suppressed above 120 km camera altitude, beyond 180 km direct camera-to-pad range, for unselected missions, and whenever Space Missions is inactive. Focus establishes a launch-site-centered camera transform once; subsequent manual heading and pitch changes remain centered on that site without an automated per-frame correction. Surface mission markers and labels use an additional conservative globe-limb margin before the exact ellipsoid occluder boundary, preventing near-horizon visibility from alternating between frames.
- **AIS vessels**: chevron symbology (naval cyan base, type tints), world-space headings, MMSI-keyed reconciliation (selection survives refreshes; pinned 3 refreshes with STALE marker when absent), detection-overlay integration (`type: 'SEA'`; a vessel's callout fades by the painted opacity of its own ambient card, so a card dropped by budget, collisions or UI chrome, or faded at the keyhole rim, leaves the callout readable), contextStore registration for voice Q&A. Empty-space clicks, id-less photorealistic-tile picks, and Escape dismiss the vessel card/HUD/context and clear its trail; picks owned by another layer (including `gev-trail:*`) and raw vessel-record picks without a live MMSI key are no-ops for vessel selection. Click and key handlers detach while the layer is disabled and reinstall on enable. Selecting another vessel replaces the selection and trail, and reconciliation clears a trail if its owning vessel is evicted.
- **AIS vessels**: hull sprites by vessel kind, tinted by type (see the map sprites entry below), world-space headings, MMSI-keyed reconciliation (selection survives refreshes; pinned 3 refreshes with STALE marker when absent), detection-overlay integration (`type: 'SEA'`; a vessel's callout fades by the painted opacity of its own ambient card, so a card dropped by budget, collisions or UI chrome, or faded at the keyhole rim, leaves the callout readable), contextStore registration for voice Q&A. Empty-space clicks, id-less photorealistic-tile picks, and Escape dismiss the vessel card/HUD/context and clear its trail; picks owned by another layer (including `gev-trail:*`) and raw vessel-record picks without a live MMSI key are no-ops for vessel selection. Click and key handlers detach while the layer is disabled and reinstall on enable. Selecting another vessel replaces the selection and trail, and reconciliation clears a trail if its owning vessel is evicted.
- **Track trails**: server accumulates per-MMSI ring buffers (`/api/vessels/track?mmsi=`, Float32+Uint32, 64 samples, 30s/25m thinning); aircraft backfill proxies `/api/flights/track` (OAuth, own credit bucket). Military aircraft keep only their locally accumulated trails: `/api/military/track` validates the hex, then answers `503 history_unavailable` without an upstream request.
- Shared `src/data/pickRegistry.js` stops the two flight layers' click handlers from fighting over the camera.
@@ -8020,8 +8039,10 @@ pins and share links already supply complete boxes.
normal four-samples-per-250-ms budget. Retry timestamps more than the maximum
30-second backoff ahead of the current clock are ignored. A smaller rollback
can retain a bounded retry delay of up to 30 seconds.
- Commercial and military aircraft use the same high-level FLEET model regime: 2D billboards when zoomed out, optional glTF models when closer, controlled by the DISPLAY rail `3D` toggle and `Proximity` / `All` modes. Every model is one of the project's procedural fleet models (`public/models/fleet/`, MIT, 122 GLBs, about 2 MB in all; `public/models/README.md`), chosen per aircraft by `aircraftModelSpec` (`src/data/fleetModels.js`): the first of its ICAO type's callsign rules in `types.json` (`aircraft_callsign`) its callsign matches, else its type's entry, else the model of its `classifyAircraft` class for a type the map lacks, else its ADS-B emitter category's, else the default airliner. It is drawn LIFE SIZE: the type's published length over the model's built length (`src/layers/flights/modelSpec.js`, shared by Flights, Military Flights and Local ADS-B), and a grounded aircraft stands the model's scaled clearance above the ground. An airport ground vehicle (feed type `ZVEH`) is a fire truck (`FIRE…`), pushback tug (`PUSH…`, `TUG…`), van (`DEICER…`, `SQUID…`, `SQB…`) or else a car by its callsign, and a ground station (`GRND`) is an 11.8 m radio mast; these models (catalog category `other`) are drawn at their built size, and such a contact with no altitude stands on the ground instead of at the airborne default (`src/layers/flights/records.js`). `classifyAircraft` still picks the 2D icons. The whole set loads once, up front, when a layer that draws it starts (`loadFleetModelSet`, which logs `[Fleet] N/122 models (X MB) loaded in N ms`); models are built from those bytes, never fetched mid-session, and an aircraft stays its billboard until the set has loaded. Every aircraft model draws its mesh's own colours (`aircraftModelBlend`, `src/data/aircraftModelLighting.js`): Cesium's `ColorBlendMode.HIGHLIGHT` with white, in Flights, Military Flights and Local ADS-B alike; the tracked colour (cyan, or amber in Military Flights) and the emergency red multiply into the mesh, so its paint still shows. IR boost draws them flat white (`MIX` at `1.0`). Under NVG/FLIR (map preset or Cockpit vision) models render unlit flat-white at full alpha and scene fog is disabled (fog otherwise blacks out distant models with the globe hidden); state restores on exit.
- Vessels, Transit and Rail draw fleet models under the same DISPLAY rail `3D` toggle, at the same altitude ceiling, caps and add/keep radii as the aircraft (`FLEET_MODEL_POLICY`, `src/layers/flights/policy.js`; `createFleetModelLayer`, `src/data/fleetModelInstances.js`). A vessel's model follows its AIS ship type and is drawn at its reported length and beam (AIS static dimensions A+B and C+D, now carried on vessel rows as `length` and `beam`), standing at the sea surface, heading by true heading then course. An aid to navigation is not a hull: a vessel record whose type names a buoy, beacon, mark, RACON or light, or whose MMSI is an aid-to-navigation station's (`99MIDxxxx`), is `isAidToNavigation` (`src/data/vesselTypes.js`) and is drawn as the set's `buoys` model of the IALA mark its type names (`aidToNavigationModel`, `src/data/fleetModels.js`: cardinal N/E/S/W, port or starboard hand, preferred channel by its side, safe water, isolated danger, special mark; a beacon, light, light vessel, RACON or reference point with no mark of its own is the special mark), else a red can (`DEFAULT_AID_MODEL`), at its built size and facing north whatever heading it reports. A type is an aid's when it is one of the 32 kinds an aid report names or uses a word for one (buoy, beacon, cardinal, safe water, RACON, lighthouse and so on); a vessel that works on aids (`Buoy Tender`, `Buoy Layer`) is not one. Its icon is a bone-white ringed disc (`AID_TO_NAVIGATION_STYLE`, `src/data/vesselLabels.js`) instead of a chevron, never rotated, and its card, selected card and HUD readout (`src/layers/vessels/cards.js`) show its kind alone, whole, in that colour: no speed or heading, since a fixed mark has neither. AISStream subscribes to `AidsToNavigationReport` (message 21) by default, and the server names each report's aid type code (0 to 31) as its kind (`aidToNavigationTypeName`: `20` is `Cardinal Mark N`) rather than reading it as a ship type, and its name runs on into the report's `NameExtension`. A virtual aid (the report's `VirtualAtoN` flag: a mark broadcast where nothing physical stands) carries `virtual: true` on its row, and on its vessel source record (the live-source contract's `virtual`, `src/sources/live/contract.js`, false unless a source says true; any source may set it). It keeps its disc but never gets a model (`vesselModelSpec` returns null for it, and the vessel layer gathers no model item for it), and its card and readout add `VIRTUAL` after its kind. `aisStreamRows` (`server/providers/vessels/ais-store.js`) puts every vessel ahead of every aid, so a capped request (the layer asks for 12,000 rows) never gives up a ship for a buoy. The `vessels_in_area` tool (and the brief built on it) counts ships only: it leaves aids out of its rows, counts, breakdowns and speed stats. A transit vehicle's model follows its route's GTFS `route_type` when its record carries one and that type is a kind of the vehicle's mode (`types.json` `transit.route_types`: 200 a coach, 101 a high-speed set, 106 a regional DMU, 710 a double-decker), else its layer mode (`transit.modes`: bus, trolleybus, tram, cable car, subway, monorail, rail, funicular, gondola or ferry; a vehicle of `unknown` mode keeps its icon); a fleet hint that overrules the route (a bus on a tram route) leaves the type unused. A monorail and a gondola are raised by their `transit.elevation` lifts. A train's model follows its rail category and mode (rail, metro or tram). The bundled GTFS-Realtime proxy carries no route type, so its vehicles draw their mode's model; a source that adds `routeType` reaches the finer ones. Both stand on the road or rail top they are drawn on, without the 1.5 m `GROUND_FLOOR_LIFT_M` their icons carry, and are painted in their mode or category colour where the model's `_TINT` attribute marks it. A vessel model is clipped at its waterline (one clipping plane per model, at the model origin's horizontal plane), so its hull below the water never shows through a plain globe, which Cesium does not depth-test models against. Under the NVG/FLIR styles (the Flights `irBoost` parameter) these models render unlit flat white, as aircraft models do. Each vehicle's icon stays the visual until its model is loaded, ready and placed; a model is picked as its icon is, and a vehicle drawn as its model keeps its selection card and its place in the detection overlay.
- Commercial and military aircraft use the same high-level FLEET model regime: 2D billboards when zoomed out, optional glTF models when closer, controlled by the DISPLAY rail `3D` toggle and `Proximity` / `All` modes. Every model is one of the project's procedural fleet models (`public/models/fleet/`, MIT, 122 GLBs, about 2 MB in all; `public/models/README.md`), chosen per aircraft by `aircraftModelSpec` (`src/data/fleetModels.js`): the first of its ICAO type's callsign rules in `types.json` (`aircraft_callsign`) its callsign matches, else its type's entry, else the model of its `classifyAircraft` class for a type the map lacks, else its ADS-B emitter category's, else the default airliner. It is drawn LIFE SIZE: the type's published length over the model's built length (`src/layers/flights/modelSpec.js`, shared by Flights, Military Flights and Local ADS-B), and a grounded aircraft stands the model's scaled clearance above the ground. An airport ground vehicle (feed type `ZVEH`) is a fire truck (`FIRE…`), pushback tug (`PUSH…`, `TUG…`), van (`DEICER…`, `SQUID…`, `SQB…`) or else a car by its callsign, and a ground station (`GRND`) is an 11.8 m radio mast; these models (catalog category `other`) are drawn at their built size, and such a contact with no altitude stands on the ground instead of at the airborne default (`src/layers/flights/records.js`). `classifyAircraft` still picks the 2D icons (see the map sprites entry below). The whole set loads once, up front, when a layer that draws it starts (`loadFleetModelSet`, which logs `[Fleet] N/122 models (X MB) loaded in N ms`); models are built from those bytes, never fetched mid-session, and an aircraft stays its billboard until the set has loaded. Every aircraft model draws its mesh's own colours (`aircraftModelBlend`, `src/data/aircraftModelLighting.js`): Cesium's `ColorBlendMode.HIGHLIGHT` with white, in Flights, Military Flights and Local ADS-B alike; the tracked colour (cyan, or amber in Military Flights) and the emergency red multiply into the mesh, so its paint still shows. IR boost draws them flat white (`MIX` at `1.0`). Under NVG/FLIR (map preset or Cockpit vision) models render unlit flat-white at full alpha and scene fog is disabled (fog otherwise blacks out distant models with the globe hidden); state restores on exit.
- **Map sprites.** Every far-away contact is a white sprite on the 96-unit, nose-up frame of `src/data/aircraftIcons.js`, tinted when it is drawn, so one icon-atlas slot serves every colour and selection state. Sprites are the far level of detail: the handoff to 3D models is unchanged, and no sprite is sized by the contact's length (each layer keeps its own size rules: aircraft ×0.8 on the ground and larger when tracked, vessels by speed). **Aircraft** keep their class glyphs, and every class draws at one size: there is no per-class scale in Flights, Military Flights or Local ADS-B, and each glyph is fitted so its farthest edge sits 44 units from the centre of the 96-unit frame (`BODY_HALF_EXTENT`, re-measured from the rasters by `src/data/aircraftIcons.test.mjs`), so a light aircraft is as big as a quadjet and is told apart by shape. `classifyAircraft` (`src/data/aircraftClass.js`) has two classes that are not aircraft, each with a label: `vehicle` (Airport vehicle: feed type `ZVEH`, ADS-B emitter category `C1` or `C2`, OpenSky category 16 or 17), one van-shaped sprite for every kind, tinted orange amber (`VEHICLE_TINT_CSS`, `#FF8F1F`, apart from the military `#FFB800`), and `station` (Ground station / obstacle: type `GRND`, or the point, cluster and line obstacles of emitter `C3` to `C5` and OpenSky 18 to 20), a radio mast drawn upright, also when tracked. Both are known from a contact's first fix: Flights classes it by the feed's own ground type before any airframe lookup (the early ground-type rule in `src/layers/flights/records.js`) and keeps a feed's emitter category string (`"C1"`) as well as OpenSky's integer one; Local ADS-B classes it by its emitter category. The **helicopter** is a top-down body under a four-blade rotor drawn in three frames 30° apart (`aircraftIcon('helicopter', px, frame)`); four blades repeat every 90°, so the loop is seamless. `rotorFrame` (`src/data/rotorFrames.js`) steps the frames at 10 a second from a phase hashed from the contact's id, so helicopters flying together do not change in step, and holds the middle frame (blades as an X) on the ground. The Flights and Military Flights layers keep the airborne helicopters drawn as their glyph in a map and, on each fleet pass (about 12 a second), write new images only for those in the camera's view, above the horizon and shown, whose frame changed (`_turnRotors`, `src/data/aircraftIconLayer.js`); one judged out of view is not judged again until its frame steps on. The tracked one's billboard is given its new images, and the still frame as soon as it lands. With no airborne helicopter on the map the pass does nothing. Local ADS-B redraws its markers each frame and picks the frame as it does. **Vessels** are drawn as the white hull of their kind (`vesselKind`, `src/data/vesselTypes.js`, by AIS type code or text family: cargo 70–79, tanker 80–89, passenger and ferry 60–69, high-speed 40–49, fishing 30, tug, pilot and service 31, 32, 50, 52–54, sailing 36, pleasure 37, military, law enforcement and rescue 35, 55, 51, and other), bow up and turned with course (`src/data/vesselSprites.js`), tinted by the kind's colour (`VESSEL_KIND_STYLES`, shared with the vessel card's accent; sailing `#b49cff`, pleasure `#ff6f61`, military and law `#a9bccb` and high-speed `#c6ff3d` are their own), white while selected. **Aids to navigation** are one buoy sprite, upright, never turned and with no halo.
- Fleet models with moving parts are posed live (`ModelItem.parts`, capability `modelParts`), by the rules in `src/data/modelPartDrivers.js`, read from each model's part table (`fleetPartTable`, `src/data/fleetModels.js`). Aircraft and helicopters (Flights, Military Flights, Local ADS-B): fans, propellers and rotors turn while airborne or taxiing faster than 1 m/s; the landing gear is down on the ground, comes down between 750 and 600 m above the ground when descending faster than 1 m/s, and otherwise is down below 100 m and up above 300 m; gear doors open over the first quarter of the gear's travel; flaps follow the gear in the air and are up on the ground. Height above the ground is the render altitude over the cached ground floor; where no ground height is known (always for Local ADS-B), the gear is down while the aircraft descends faster than 1 m/s, slower than 85 m/s, below 5,000 m, and up otherwise. Vessels: the radar sweeps while under way (over 0.5 m/s). Transit and rail: wheels roll at the speed drawn, and doors open while stopped at a stop. A model without parts, or a renderer without `modelParts`, draws the model whole, at rest. The bundled fleet set (`public/models/fleet/`) has no part tables yet, so it draws as before.
- Vessels, Transit and Rail draw fleet models under the same DISPLAY rail `3D` toggle, at the same altitude ceiling, caps and add/keep radii as the aircraft (`FLEET_MODEL_POLICY`, `src/layers/flights/policy.js`; `createFleetModelLayer`, `src/data/fleetModelInstances.js`). A vessel's model follows its AIS ship type and is drawn at its reported length and beam (AIS static dimensions A+B and C+D, now carried on vessel rows as `length` and `beam`), standing at the sea surface, heading by true heading then course. An aid to navigation is not a hull: a vessel record whose type names a buoy, beacon, mark, RACON or light, or whose MMSI is an aid-to-navigation station's (`99MIDxxxx`), is `isAidToNavigation` (`src/data/vesselTypes.js`) and is drawn as the set's `buoys` model of the IALA mark its type names (`aidToNavigationModel`, `src/data/fleetModels.js`: cardinal N/E/S/W, port or starboard hand, preferred channel by its side, safe water, isolated danger, special mark; a beacon, light, light vessel, RACON or reference point with no mark of its own is the special mark), else a red can (`DEFAULT_AID_MODEL`), at its built size and facing north whatever heading it reports. A type is an aid's when it is one of the 32 kinds an aid report names or uses a word for one (buoy, beacon, cardinal, safe water, RACON, lighthouse and so on); a vessel that works on aids (`Buoy Tender`, `Buoy Layer`) is not one. Its icon is the buoy sprite, tinted bone white (`AID_TO_NAVIGATION_STYLE`, `src/data/vesselLabels.js`), upright and never turned, and its card, selected card and HUD readout (`src/layers/vessels/cards.js`) show its kind alone, whole, in that colour: no speed or heading, since a fixed mark has neither. AISStream subscribes to `AidsToNavigationReport` (message 21) by default, and the server names each report's aid type code (0 to 31) as its kind (`aidToNavigationTypeName`: `20` is `Cardinal Mark N`) rather than reading it as a ship type, and its name runs on into the report's `NameExtension`. A virtual aid (the report's `VirtualAtoN` flag: a mark broadcast where nothing physical stands) carries `virtual: true` on its row, and on its vessel source record (the live-source contract's `virtual`, `src/sources/live/contract.js`, false unless a source says true; any source may set it). It keeps its buoy sprite but never gets a model (`vesselModelSpec` returns null for it, and the vessel layer gathers no model item for it), and its card and readout add `VIRTUAL` after its kind. `aisStreamRows` (`server/providers/vessels/ais-store.js`) puts every vessel ahead of every aid, so a capped request (the layer asks for 12,000 rows) never gives up a ship for a buoy. The `vessels_in_area` tool (and the brief built on it) counts ships only: it leaves aids out of its rows, counts, breakdowns and speed stats. A transit vehicle's model follows its route's GTFS `route_type` when its record carries one and that type is a kind of the vehicle's mode (`types.json` `transit.route_types`: 200 a coach, 101 a high-speed set, 106 a regional DMU, 710 a double-decker), else its layer mode (`transit.modes`: bus, trolleybus, tram, cable car, subway, monorail, rail, funicular, gondola or ferry; a vehicle of `unknown` mode keeps its icon); a fleet hint that overrules the route (a bus on a tram route) leaves the type unused. A monorail and a gondola are raised by their `transit.elevation` lifts. A train's model follows its rail category and mode (rail, metro or tram). The bundled GTFS-Realtime proxy carries no route type, so its vehicles draw their mode's model; a source that adds `routeType` reaches the finer ones. Both stand on the road or rail top they are drawn on, without the 1.5 m `GROUND_FLOOR_LIFT_M` their icons carry, and are painted in their mode or category colour where the model's `_TINT` attribute marks it. A vessel model is clipped at its waterline (one clipping plane per model, at the model origin's horizontal plane), so its hull below the water never shows through a plain globe, which Cesium does not depth-test models against. Under the NVG/FLIR styles (the Flights `irBoost` parameter) these models render unlit flat white, as aircraft models do. Each vehicle's icon stays the visual until its model is loaded, ready and placed; a model is picked as its icon is, and a vehicle drawn as its model keeps its selection card and its place in the detection overlay.
- **Aircraft models skip Cesium's dynamic environment map (2026-10-24).** Flights, Military Flights and Local ADS-B pass `environmentMapOptions: AIRCRAFT_ENVIRONMENT_MAP_OPTIONS` (`{ enabled: false }`, `src/data/aircraftModelLighting.js`) to every drawn model. Otherwise each `Model` renders the sky around it and reads it back from the GPU (`readPixels`) when it is first placed, and again whenever it moves more than 1 km, the scene's atmosphere settings change, or (under sunlight dynamic lighting) an hour of scene time passes (`DynamicEnvironmentMapManager`, Cesium 1.138). The models are lit from Cesium's default spherical harmonics instead, with no specular environment map, so the sky's model-lighting cube map no longer reaches aircraft. `src/data/aircraftModelLighting.test.mjs` pins the option at every drawn model call; every model is built from the fleet set loaded up front, so there is no separate preload.
- The DISPLAY-rail `3D` toggle is the user-facing activation path for both aircraft layers. Their small approved GLBs build their render resources without Cesium's frame-spread job queue, preventing continuous Photorealistic 3D Tiles streaming from starving model readiness; model caps, tracking, camera, and fallback billboards are unchanged.
- **The `3D` toggle DEFAULTS ON in `proximity` on a first run.** Proximity is itself the budget — models appear only below `MODEL_ALT_CEIL_M` and only for the nearest `MODEL_MAX` in view — so the default costs nothing at globe scale, and `all` remains a deliberate opt-in. A fresh boot runs NO layer-state restoration (`LayerStateCoordinator.start()` returns early with neither a share payload nor stored state), so four independent initializers decide what a first-run operator sees and must agree: `booleanOption('models3d', 'e', true)` in `src/data/layerState.js`, `_models3dEnabled = true` in BOTH flight layers, `this._models3dEnabled = true` in `src/ui/aircraftDisplay.js`, and the `active` / `visible` classes on `#models3d-toggle` / `#models3d-mode-row` in `index.html`. All four are pinned together in `src/data/layerState.test.mjs`. Explicit state still wins: because the codec omits default-valued options, `models3d: false` is now what travels in a link (`lo=…f.e.0`) and restores OFF at both aircraft layers. **Consequence for returning users:** a stored `gev:layer-state:v2` blob is a FULL options snapshot, so a session that wrote one before this change carries `models3d:false` and keeps 3D off until the operator flips it (or clears the key) — the durable snapshot is treated as the recipient's own state, by design.
@@ -8850,8 +8871,8 @@ on purpose:
- **Class.** Each aircraft is classified with `aircraftClass.js` from its
ADS-B emitter category (dump1090 strings: `A1` light, `A3` large, `A7`
rotorcraft; set A/B/C/D = type code 4/3/2/1) and, once known, its adsbdb
ICAO type. Silhouette and per-class scale come from `aircraftIcons.js`
(×0.8 on the ground), tinted magenta.
ICAO type. The silhouette comes from `aircraftIcons.js`, at the one
size every class draws at (×0.8 on the ground), tinted magenta.
- **3D.** The DISPLAY rail's 3D toggle and its proximity/all mode apply: the
layer reads the Flights layer's `models3d` params and uses the same ceiling,
caps, add/keep radii, visible-first eligibility