From 15208b5c40323e62523a411b0035f1cf4e4e3d2a Mon Sep 17 00:00:00 2001
From: Trygve Hemminghytt <274629477+trygvehhh@users.noreply.github.com>
Date: Sun, 18 Oct 2026 20:03:24 +0200
Subject: [PATCH] docs: move the changelog entry to changelog.d

---
 CHANGELOG.md                                       | 14 --------------
 .../945-cctv-vegvesen-kartverket-heights.md        | 14 ++++++++++++++
 2 files changed, 14 insertions(+), 14 deletions(-)
 create mode 100644 changelog.d/945-cctv-vegvesen-kartverket-heights.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index 58e2f1798..98d32365f 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -435,20 +435,6 @@
   panel, resize it from any edge or corner, and double-click the header to dock
   it again. The position persists across reloads.
 
-- Give each Statens vegvesen camera its own ground height from Kartverket's
-  keyless point-height API (CC BY 4.0) instead of one flat 150 m prior, so
-  mountain-pass cameras no longer sit hundreds of metres below the terrain
-  where neither the point-height prior nor the ground snap resolves. About
-  850 of ~855 cameras get a height; the rest keep the old prior. Requests
-  carry 20 points, the most the API answers from its 1 m terrain model, eight
-  at a time (~6 s cold). Cameras over water use the water surface rather than
-  the sea-floor depth the API returns there; for bridge cameras that is still
-  below the deck. Heights are cached for good and misses for 6 h, so a
-  refresh only asks about new or moved cameras. After a 429, a 5xx or a
-  network failure the lookup stops and backs off (Retry-After, else 10 min).
-  The lane waits at most 12 s from its start; a slower lookup fills the cache
-  for the next refresh. `CCTV_VEGVESEN_HEIGHTS=0` turns it off. Follow-up to
-  #929.
 - Add Norway's city bikes to the Bike Share layer: Oslo, Bergen and
   Trondheim Bysykkel (Urban Sharing), Kolumbus Bysykkel in Stavanger and
   Farte Bysykkel in Skien/Porsgrunn (Entur Mobility), and Bysykkel
diff --git a/changelog.d/945-cctv-vegvesen-kartverket-heights.md b/changelog.d/945-cctv-vegvesen-kartverket-heights.md
new file mode 100644
index 000000000..e300b702c
--- /dev/null
+++ b/changelog.d/945-cctv-vegvesen-kartverket-heights.md
@@ -0,0 +1,14 @@
+- Give each Statens vegvesen camera its own ground height from Kartverket's
+  keyless point-height API (CC BY 4.0) instead of one flat 150 m prior, so
+  mountain-pass cameras no longer sit hundreds of metres below the terrain
+  where neither the point-height prior nor the ground snap resolves. About 850
+  of ~855 cameras get a height; the rest keep the old prior. Requests carry 20
+  points, the most the API answers from its 1 m terrain model, eight at a time
+  (~6 s cold). Cameras over water use the water surface rather than the
+  sea-floor depth the API returns there; for bridge cameras that is still
+  below the deck. Heights are cached for good and misses for 6 h, so a refresh
+  only asks about new or moved cameras. After a 429, a 5xx or a network
+  failure the lookup stops and backs off (Retry-After, else 10 min). The lane
+  waits at most 12 s from its start; a slower lookup fills the cache for the
+  next refresh. `CCTV_VEGVESEN_HEIGHTS=0` turns it off. Follow-up to #929
+  (trygvehhh, #945).